Indoor/outdoor integrated CCTV domecamera
Camera
The impact-resistant camera consists of a charged-coupled device (CCD) camera board, lens( fixed-focal-length), enclosure and polycarbonate dome. The camera video interface is via 75ohm coaxial media. The camera enclosure is available for indoor and outdoor applications. The camera, lens and enclosure fully assembled and tested by the manufacturer. The video system supports NTSC, EIA, PAL or CCIR signal format.
The Camera
The camera is a 1/3" solid-state monochrome/color video camera using an interline transfer, CCD image sensor in one of NTSC / EIA or PAL / CCIR signal formats. The horizontal resolution is a minimum 410 TV lines for standard monochrome, 570 for high resolution monochrome, 350 for standard resolution color and 480 for high resolution color. The electronic iris lens has a speed of 1/60 (1/50)-1/100,000 sec. The camera provides a composite video output at 1.0V peak-to-peak into 75ohms. The camera position has a unique 3D-position adjustment allowing for maximum lens rotation for any angle of view required.
Electrical
The input voltage range is 17-32VAC and 11-16VDC with a single power supply board: one set of power connections with auto sensing for 24VAC or 12VDC is provided. Built-in surge suppression meets a 1.5kW transient specification. Input power consumption is less than 3.5W (Color) and 2.5W (B&W). V-Phase and Iris level controls are potentiometers accessible from the front of the camera. All cameras are provided with a phase adjustment via potentiometer for AC line lock operation. The line lock adjustable range of the vertical phase is +/- 150° for NTSC (EIA) or 135° for PAL (CCIR). The camera switches automatically to internal sync mode when 12VDC is applied.
Enclosure
The enclosure and polycarbonate dome can withstand a high impact force. The polycarbonate dome is available in clear or half tint version. The clear version will include a dome insert. The half tint version has a maximum light loss no greater than 1.0 f-stop. The dome consists of 3.25" diameter, 0.125" thickness that has high optical clarity. The dome is UV- stabilized, suitable for use in areas exposed to sunlight and is hard coated for scratch resistance. The enclosure meets Nema 4X and IP66X and is designed for indoor and outdoor all weather use. The enclosure is fabricated from polycarbonate material. The enclosure is capable of mounting to a standard 4S deep electrical box. An adapter plate is also provided for additional support when mounting to ceiling tiles or drywall. The enclosure converts to flush or surface mounts by adding or removing the supplied base assembly. The dimensions of the camera do not exceed 5.6"(W) x 3.6”(H) or 143mm(W) x 93mm(H). The weight of the camera, including both the camera and the lens, is no more than 1.75bs (0.8 kg).
Warranty and Service
The camera has a 3-year limited warranty, which includes parts and labor. A toll-free number for service and customer support is available in both the United States and Canada.
Wiring
The camera has a cable exit on the back of the enclosure and a breakaway section access option on the side of the housing. The cable length supplied is 8” (203mm) for power and 6” (152mm) for video.
Lens
The camera is fully assembled by the manufacturer with one of the following interchangeable lenses: from 2.9-16mm:
Size (mm)FView Angle
HV
2.92.090°67°
3.62.074°55°
6.02.242°32°
8.02.232°24°
12.02.022°17°
16.01.815°11°
Packaging
The integrated camera and lens are assembled and packaged with all the mounting hardware and mounting instructions.
The ambient operating temperature is -13F to +122°F (-25C to +50C).
The system is tested to conform to the following standards:
CSA to:C22.2 No.94-M91
FCC to:Class A Part 15
CE to: EN55013 and EN50082-1
Applied for:
UL listed to -Standard 2044
Environmental - IP66X and Nema 4X
Model: C12 - PrimaView 04-03