FUNCTIONAL TEST CHECKLIST: FT SECDRS -

SECURITY DOORS (SECDRS) - ______

Specification Section _____

Project:______Project No:______

Associated Equipment:

____Door hardware

____Card readers

____Omron controller

____Other______

Other Related Tests: ______

1. Participants

Name

/ Firm / Participation

Party filling out this form & witnessing ______Date of test ______

Approvals. This filled-out checklist has been reviewed. Its completion is approved. Exceptions are noted below or attached.

______

General Contractor [Construction Manager] Date

______

Commissioning Authority/Agent Date Owner’s Representative Date

2.  Prerequisite Checklist

a)  The prefunctional checklist for this security door is complete and approved: Yes / No

b)  All A/E punchlist items for this and related equipment are corrected: Yes / No

c)  Sequence of operation is attached: Yes / No

d)  These functional test procedures reviewed and approved by installing contractor and applicable subcontractors: Yes / No

3.  Functional Testing Procedure

Step / Mode / Test Procedure / Expected Response / Pass (Y/N)
1 / Lock / Command/mode initiated remotely:
a)  Swipe card in reader.
b)  Manually attempt to open door (without using panic release). / Verify by visual inspection that:
a)  Door does not open.
b)  Door does not open.
2 / Open / Command/mode initiated remotely:
a)  Push/pull door, without card swipe.
b)  Activate automatic door opener, without card swipe. / Verify by visual inspection that:
a)  Door opens.
b)  Door opens.
3 / Unlock / Command/mode initiated remotely:
a)  Push/pull door, without card swipe.
b)  Activate automatic door opener, without card swipe / Verify by visual inspection that:
a)  Door opens.
b)  Door opens
4 / Normal / Command/mode initiated remotely:
a)  Swipe card.
b)  Manually attempt to open door (without using panic release). / Verify by visual inspection that:
a)  Door opens, closes and locks.
b)  Door does not open.
5 / Panic Release / Command/mode initiated remotely, door placed in Normal mode:
a)  Manually push panic bar/button and open door.
b)  Swipe card after horn sounds. / Verify locally that:
a)  Door opens, alarm sounds.
b)  Alarm stops after card swipe, and door locks upon closing.
6 / Panic Release / Command/mode initiated remotely, door placed in Lock mode:
a)  Manually push panic bar/button and open door.
b)  Swipe card after horn sounds. / Verify locally that:
a)  Door opens, alarm sounds.
b)  Alarm stops after card swipe, and door locks upon closing.

4.  System Status

a)  All items of functional test passed: Yes / No

b)  System is activated and online, deficiencies, listed below, do not prevent operation:

Yes / No

c)  System is placed in (circle mode):

Lock / Open / Unlock / Normal / Relock / Watch

Comments:

-- END OF TEST --

FUNCTIONAL TEST CHECKLIST – SECURITY DOORS

03/02 13998-01-1 OF 2 D:\DOCS\DIV1\03-02\13998-01.DOC