User manual of BJ-S6
Button Function Structure Diagram
1. Power switch：Push up for “power on”,down for “power off”.
2.Menu button:Press to show options or confirm,hold to return to main interface.
3.Volume button: While playing recording/music file, press it and use ◀◀/ ▶▶ to adjust the volume.
4.Recording Switch: Push up to start recording. Push down to finish and save the recording files.
5. ◀◀Previous track /Fast backward: Press to previous track, hold to fast backward
6.▶▶Next track / Fast forward:Press to next track ,hold to fast forward
7. Play button:Press to play/pause/go back,hold to power on/off.
8. Earphone port and USB Port 9.Recording microphone10.Speaker 11. Display screen
Note: Devicehas power saving function. It will auto turn to standby model if no any operation within the time which backlight is set. All functions corresponding to their function buttons (except recording button) must be operated when the display screen lights up. While it’s in standby model, press any button to light up screen.
I. Music
Enter music mode:Select “Music”mode,and press “Menu button” to enter.
Play/Pause music: Press◀◀/ ▶▶to select music→press “Play button”to play→press “Play button” again to pause.
Music playing settings:There are 5 settings,Repeat(Loop)/Equalizer/Replay/Replay times/Replay gap.
- Repeat(Loop)
While playing music,press “Menu button”→select “Repeat”→press “Menu button” to enter→press ◀◀/ ▶▶ to select→press “Menu button” to confirm.There are 6 options: Normal, Repeat one, Folder, Repeat folder, Repeat all, Random.
- Equalizer:There are 7 options: Natural, Rock, Pop, Classic, Soft, Jazz, DBB.
- Replay(A-B repeat)
While playing music,press “Menu button”→ select “Replay” by pressing ◀◀/ ▶▶→ press “Menu button” to enter → character 【A】 at the left bottom of screen is flashing → press ▶▶ to set the starting point of the music →character 【A】stops flashing, character【B】 starts flashing → press ▶▶ to set the finishing point of music → character 【B】stops flashing →character【A】【B】is fixed and 【A-B】repeat is set.
It will play between point【A】 and 【B】 repeatedly and return to the normal playing state after it finishes the repeating times, and the icon "A-B" disappears automatically..
- Replay times:Set the repeat time from 1 time to 10 times.
5. Replay gap:Set the repeat interval from 1 second to 10 seconds.
Deleting music file: After entering music mode→selet the file by ◀◀/ ▶▶→press “Menu button”→press ◀◀/ ▶▶ to choose ”Delet file” or “Delet All→press “Menu button” to enter→press ◀◀/ ▶▶ to selet “Yes” or “No”→press “Menu button” to confirm.”Delet file” option delets single music,and “Delet All” delets all music.(Note:Keep power on during deleting,or the file will be damaged possibly).
II. Voice mode
Enter recording mode:Select voice mode,and press “Menu button” to enter.
Play/Pause recording file: Press ◀◀/ ▶▶ to select recording file→press “Play button”to play→press it again to pause.
Recording file playing settings: There are 5 settings,Repeat(Loop)/Equalizer/Replay/Replay times/Replay gap.And the operating steps are the same with that under music mode,please check the details above.
Deleting recording file: Same with that under music mode,please check the details above.
III. Setting mode
Enter set mode:Select set mode,and press “Menu button” to enter.
There are 7 settings:1.REC set 2.Record Time 3.Backlight 4.Language 5.Power off 6.Memory info7. Firmware version.
1. REC set
After entring setting mode,selet “REC set”→press“Menu button” to enter→selet option by ◀◀/ ▶▶→press “Menu button” to confirm.
There are 4 settings:Record type,record gain set,AVR Level,AVR Delay.
1). Record type:192Kbps and 384Kbps two types.
2). record gain set:set recording sensitivityfrom 0 to 7.
3).AVR level:Activated Voice Recording,from 0 to 10.
4). AVR Delay:from 1 to 10.
2.Record Time
After entring setting mode,selet “Record Time” by ◀◀/ ▶▶→press“Menu button” to enter→set time by “Volume button” and◀◀/ ▶▶→press “Menu button” to confirm.
3.Backlight:Set backlight time from 0 to 30 seconds..
4.Language:There are 24 languages optional.
5.Power off:Sleep time:0-120.Off time:0-60.
6.Memory info:It shows storage situation.
7. Firmware version:It shows firmware version.
Connect to PC
1. Connect: Connect it to computer by USB cable,it is successfully connected if you find this icon appears in the taskbar of computer.
- Disconnect: Click on the icon → click “Remove USB flash Disk”.
Battery Charge
- Use 5V/300mA charger for charging.
- Charge by USB cable we offered. Connect the machine with computer or other portable power source by USB cable.
Treatment of common problems
1.The machine cannot boot
Please check whether the battery is exhausted. Try again after charging.
2.Cannot hear the sound though earphone/ headset
1).Please check whether the volume is set to zero.
2).Please check whether the headset is properly inserted into the headphone jack.
3.Serious noise
1).Please check whether the headset plug is clean. Dirt can cause noise.
2).Please check whether the music file is damaged. If the music file is damaged, it may cause serious noise or skips. Try to play other music files.
4.Cannot download files
1).Please make sure the player and computer is connected properly.
2).Please check whether the internal memory space is full.
3).Please check whether the USB cable is damaged.