Detergent Disinfectant

Vanoquat

Detergent disinfectant

Description

Detergent disinfectant for the food process industry. May be applied by brushing, soaking or spraying in single or two stage cleaning disinfection programmes.

Features & Benefits

·  Detergent disinfectant for use in the food industry.

·  Effective against a wide range of pathogenic & spoilage organisms.

·  Effective in hard or soft water.

·  Suitable for use in single or two stage clean & disinfect programmes.

How to Use

SINGLE STAGE CLEAN & DISINFECT

VANOQUAT should be used at 1.0-2.0% v/v (10-20mls/litre). Gross soiling should be removed before applying the solution by clean cloth, brush or immersion. Rinse off with clean water.

TWO STAGE CLEAN & DISINFECT

Following thorough cleaning using a suitable detergent and rinsing with clean water, VANOQUAT should be applied at 0.5-1.0% v/v (5-10mls/litre) by clean cloth, brush, immersion or high or low pressure spray. It may be applied at ambient or elevated temperature.

In all cleaning and disinfection programmes a contact time of 10 – 15 minutes should be used before rinsing with potable water.

FOGGING

In high care areas, atmospheric fogging may be used as an additional hygiene step. VANOQUAT should be applied at 0.5-1.0% v/v (5-10mls/litre) through suitable fogging equipment. For effective disinfection 2-3 litres of solution should be atomised per 100m³ of air.

Composition

Contains a blend of Quaternary Ammonium Compound, Sequestering Agents, Bactericide & Nonionic Surfactants.

Typical Product Data

Appearance: Clear Liquid

Odour: Unperfumed

Specific Gravity (20oC): 1.030

Colour: Colourless

pH – undiluted: 8.3

Shelf Life Unopened: 3 Years

Packaging

Pack: Order Code Pallet Size

25lt A038K 24 x 25lt

Storage:

Store in original sealed container and protect from extremes of temperature.

Biodegradability:

All surfactants used in Evans Vanodine products comply with the current European Regulations concerning Biodegradability and protection of the environment.

Quality Assurance

This product is manufactured in the U.K. by EVANS VANODINE INTERNATIONAL PLC whose Quality System is registered by

THE BRITISH STANDARDS INSTITUTION

Cert of Reg. No. FM 09535

Revision Date: 0106