Bio-Cure Label

Bio-Cure Label

Specimen label

REG.B 0000 ACT No. 36 of 1947 / WET Nr. 36 van 1947

A FOLIAR FERTILIZER. ASSISTS IN UP-REGULATING SPECIFIC GENES ASSOCIATED WITH ROOT DEVELOPMENTS AND ETHYLENE REDUCTION FOR SIGNIFICANTLY IMPROVED YIELD, QUALITY AND RETURN.

FERTILIZER GROUP 2

Active Ingredient/Aktiewe Bestanddeel

Urea………………………………………………

Potassium Hydroxide…………………………..

Net volume ……...... ….....500ml, 1L, 5L, 10L, 20L, 80L, 800L...... ….....……... Netto volume

S.G (at 20°C):1.36

Registration Holder / Registrasiehouer

Stoller South Africa (Pty) Limited

REG No 2012/129377/07

165 West Street, Sandton, 2146

P.O Box 2374, Parklands, 2121

Tel: 011669 9000

Email:

Web:

Marketed and Distributed by

MBFi

REG No 2004/102938/23

144, Ave 2, Modder East Orchards, Delmas, Mpumalanga, 2210

P.O Box 1137, Delmas, Mpumalanga, 2210

Tel: +27 (0) 82738 0080

Fax: +27 (0) 86 547 6711

Email:

Web:

(TM)Trademark of Stoller SA/ Handelsmerk van Stoller SA

Batch No. ………………………..……………………….. Lot Nr.

Date of Manufacture …………….…… Datum van Vervaardiging

UN NO:

BIO-FORGE

A FOLIAR FERTILIZER. ASSISTS IN UP-REGULATING SPECIFIC GENES ASSOCIATED WITH ROOT DEVELOPMENTS AND ETHYLENE REDUCTION FOR SIGNIFICANTLY IMPROVED YIELD, QUALITY AND RETURN.

REG.B 0000 ACT No. 36 of 1947 / WET Nr. 36 van 1947

ACTIVE INGREDIENTS:

Urea……………………………………………

Potassium Hydroxide………………………

S.G (at 20°C):1.36

Registration Holder / Registrasiehouer

Stoller South Africa (Pty) Limited

REG No 2012/129377/07

165 West Street, Sandton, 2146

P.O Box 2374, Parklands, 2121

Tel: 011669 9000

Email:

Web:

Marketed and Distributed by

MBFi

REG No 2004/102938/23

144, Ave 2, Modder East Orchards, Delmas, Mpumalanga, 2210

P.O Box 1137, Delmas, Mpumalanga, 2210

Tel: +27 (0) 82738 0080

Fax: +27 (0) 86 547 6711

Email:

Web:

(TM)Trademark of Stoller SA/ Handelsmerk van Stoller SA

WARNINGS

  • Harmful if inhaled or absorded through skin.
  • Causes substantial but temporary eye injury if contact occurs.
  • Do not apply directly to water, to areas where surface water is present or intertidal areas below the mean high tide water mark.
  • Do not contaminate water when cleaning equipment or disposing of equipment washwater.
  • Exposed treated seed may be hazardous to birds and other wildlife.
  • Dispose of all excess treated seed and seed packaging by burial away from bodies of water.
  • Re-entry Interval: Do not enter treated area until spray deposit has dried, unless wearing protective clothing.

PRECAUTIONS

Store in original labeled container only.

  • Wear personal protective equipment – waterproof gloves, overalls and face shield/goggles when handling.
  • Avoid inhalation of spray mist or vapor.
  • Avoid contact with skin, eyes as well as clothin
  • If clothing becomes contaminated, wash thouroughly before reuse.
  • If accidental contact with skin occurs, rinse thoroughly with water for 15 – 20minutes. Seek medical attention for treatment advice if irritation persists.
  • If accidental contact with eyes occurs, hold eye open (remove any contact lenses) and rinse slowly and gently with water for 15 -20 minutes. Seek medical attention for treatment advice if irritation persists.
  • Wash hands and face with immediately with soap and water after use or before eating, drinking, smoking or using the toilet.
  • Remove personal protective equipment immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.
  • Discard clothing and other absorbent materails that have been drenched or heavily contaminated with this products concentrate. Do not reuse them.
  • Do not reuse or refill this container. Clean container promptly after emptying.
  • Invert the empty container for at least 30 seconds after the flow has slowed down to a drip. Thereafter rinse empty container three times with a volume of water equal to a minimum of 10% of that of the container. Add the rinsing to the contents of the spray tank before destroying the container by perforation, flattening and burying and do not use for any other purpose.

Although this remedy has been extensively tested under a large variety of conditions, the registration holder does not warrant that it will be efficacious under all conditions because the action and effect thereof may be affected by factors such as abnormal climatic and storage conditions; quality of dilution water; compatibility with other substances not indicated on the label and the occurrence of resistance of the pest against the remedy concerned as well as by the method, time and accuracy of application. Furthermore the registration holder, does not accept responsibility for damage to crops, vegetation, the environment, or harm to man or animal, or for lack of performance of the remedy concerned, due to failure of the user to follow the label instructions or to the occurrence of conditions which could not have been foreseen in terms of the registration. Consult the supplier in the event of any uncertainty.

DIRECTIONS FOR USE - Use only as indicated

SEED TREATMENT:

For quick emergence, apply 240ml per 1kg of seed. This treatment applies to all crops to express the full genetic potential of the seed and mazimize the grower’s return on incestment.

CROP / DOSAGE PER HECTARE / REMARKS
Maize / 1200ml Bio-Forge; or
1200ml Bio-Forge; or
1200ml Bio-Forge
600ml – 800ml Bio-Forge / Apply as in-furrow application at planting;
Apply with starter fertilizer at planting;
Apply in broadcast spray from 6th leaf stage until tasseling (V6-Vt).
Apply along with late-season fungicide sprays.
NOTE: Earlier application will provide better protection from drought and potential herbicide damage.
When comparing BioForge with late-stage fungicide treatments, foliar spray 800ml per hectare at the V12 stage before tassel emergence.
Silage Maize / 1200ml Bio-Forge / Apply at the V6 – V7 stage.
Soybean / 1200ml Bio-Forge; or
1200ml Bio-Forge; or
1200ml Bio-Forge; or
600ml – 800 ml Bio-Forge; or
1200ml Bio-Forge
600ml - 800ml Bio-Forge / Apply as in-furrow application at planting;
Apply with liquid starter fertilizer;
Apply at pre-flowering stage;
Apply along with the foliar nutrient mix when using a pre-flowering foliar fertilizer application;
Apply as a foliar spray at the R4 to R5 stage of growth.
Apply along with late-season fungicide sprays.
NOTE: Testing has shown that when used with fungicide, Bio-Forge can be applied at 800ml per hectare when fungicides are applied.
Wheat / 1200ml Bio-Forge; or
600ml-800ml Bio-Forge / Apply along with post-emergent herbicides;
Apply along with late-season fungicide sprays.
Cotton / 1200ml Bio-Forge; or
1200ml Bio-Forge; or
1200ml Bio-Forge / Apply as in furrow application at platning;
Apply with starter fertilizer at planting;
Apply as broadcast spray at MHS (Match Head Square).
Rice / 1200ml Bio-Forge / Apply as foliar application 2 days prior to permanent flooding. Bio-Forge will help the plants access oxygen after flooding, a period normally associated with the yellowing of plants.
NOTE:Bio-Forge is not recommended for rice that is water seeded.
Alfalfa, Mixed Hay, Grass Hay / 600m – 800ml Bio-Forge / Apply only 2 to 4 applications per season.
All Other Crops / 1200ml Bio-Forge / Apply as foliar broadcast spray after the plants have 3 true leaves until the time of flowering.

1

Bio-Forge 2013