Registration: / Audit Ref:
Aircraft Type: / Location:
MSN: / Review Completion Date:
Total Airframe Flight Hours: / Total Airframe Flight Cycles: / Current at:
Engine Type: / Serial No: / Hours: / Cycles: / Current at:
No.1
No.2
APU OEM & Model: / Serial No: / Hours: / Cycles: / Current at:

AIRCRAFT FLIGHT MANUAL

Item / Action Performed / or / Checked By:
1 / Check that the Aircraft Flight Manual (AFM) is current and applicable to the aircraft registration/MSN, and that the aircraft conforms to the current amendment of the AFM, which reflects the latest revision status as published by the Type Certificate holder
AFM No:
Revision No: / Amendment date
2 / Ensure that AFM includes all relevant supplements for STC, Airworthiness Directives and UK CAA supplements
3 / Complete Declaration of Flight Manual Status

MAINTENANCE PROGRAMME DETAILS

Item / Action Performed / or / Checked By:
1 / CAA ref:
TOM ref:
Issue No. / Amendment No.
Date:
MPD ref:
Date:

MASS & BALANCE STATEMENT

Item / Action Performed / or / Checked By:
1 / Check that the mass and balance statement / weight and balance report is valid and reflects the aircraft configuration.
Ensure that the current mass and balance status incorporates any changes created by applicable modifications / repairs performed since the last main reweigh.
Check for any inconsistencies between each event where the Aircraft Weight and Balance record has changed
Check that all Weight and Balance supplements are available and correct
Date of weighing:
Date of next due:
Weighing report no:
2 / Confirm that statement and schedule has been issued by Planeweighs

TYPE DESIGN APPROVAL

Item / Action Performed / or / Checked By:
1 / Review the appropriate published type data for date and revision status. Confirm the aircraft and engines conform to the Type Certification Data Sheets (TCDS) and comply with the latest revision of the type design specifications approved by the Agency.
Airframe:
EASA TCDS No: / Issue No.
Issue Date:
Engine
EASA TCDS No: / Issue No.
Issue Date:
Noise:
EASA TCDS No: / Issue No.
Issue Date: / Record No.
Check the noise code for aircraft on the EASA noise website and confirm the aircraft is categorised with the correct code:

AIRCRAFT REPAIRS

Item / Action Performed / or / Checked By:
Check the repairs as identified by the manufacturer and recorded in the SRL:
1 / Check that any ICAs associated with repairs are correctly forecasting
In the case of Interim/temporary repairs the schedule for inspections and/or permanent repair has been shown and not exceeded the threshold or interval

LATEST AIRWORTHINESS DIRECTIVES (BI-WEEKLY)

Item / Action Performed / or / Checked By:
1 / It is confirmed that compliance with the following regulatory requirements has been established. (for ADs this will be the latest published bi-weekly):
AircraftState of Design ADs:
EngineState of Design ADs:
EquipmentState of Design ADs:
Published EASA ADs:
CAP 747 up
to Iss.No. / Amendment / Date

AD CONTROL

Item / Action Performed / or / Checked By
1 / Sampled applicable airworthiness directives have been applied and properly registered (at least 1 engine AD)
AD No: / SB. No(s)
Title:
Last Due: / Last Done:
Next Due
AD No: / SB No(s):
Title:
Last Due: / Last Done:
Next Due
AD No: / SB No(s):
Title:
Last Due: / Last Done:
Next Due

AIRCRAFT FLEET INTRODUCTION COMPLIANCE REPORT

Distribute and collate form A&DF1001V1 aircraft fleet introduction and compliance report sign off sheet\\a2-eng-2ka3\docs\forms\Aircraft Fleet Introduction Compliance Report (A&DF1001).pdf

SUMMARY OF OBSERVATIONS

ReviewObservation Number / Description of Observation
Due by:

STATEMENT BY THE AIRWORTHINESS REVIEW SIGNATORY:

Airworthiness engineer / Authorisation No.
Signature / Date
Title
Continuation Sheet (Notes and Observations)

Thomson Airways Ltd (ENG/1712A)Page 1 of 6