CK Power
30KW STANDBY
POWER TRAILER
Rugged lightweight standby trailer for use for: utilities, contractors, municipalities, and other needing on-site power during construction or emergency situations.
Dimensions: 10.5’ (8’ folded) (L) X 5.25’ (W) X 7.25’ (H)
Weight: 3150 lb. fueled
25kW continuous/ 30kW standby power at 120/240 volt single phase*
*other configurations available
2.4L John Deere diesel engine model PE4024TF281 (TIER 4 compliant)
97-gallon cross-link polyethylene fuel tank
100-amp 240-volt main breaker mounted in control panel
Digital control panel with: warning/shutdowns for low oil pressure, high coolant temp, loss of voltage for both ac output and dc output along with engine over speed protection. Panel displays ac voltage, dc voltage, ac current, ac frequency, hours and has auto start capabilities with a simple two-wire connection to control panel.
12kW load bank for exercising engine and genset at 50% load.
24 hours continuous run-time at 100% load on one tank of fuel.
Galvannealed steel body and chassis construction with white powder coated finish. Other colors available upon request
Folding tongue for compact storage and added security
Single axle with electric brakes
Forklift pockets in frame and a single point top-lifting eye for loading/unloading
All access doors are Locking for Internal storage and gear
Easy single-side service
Electronic display for:
Engine RPM
Voltage
Oil pressure
Current
Coolant Temp
Frequency
Battery Voltage
kVA
Engine Run Time
Fuel Level
Fold up tongue design for compact storage and shipping. Capable of being loaded with a fork truck from all four sides when tongue is in the upright position. A single point-lifting eye is also available standard for lifting and loading. Tail light connector changes out easy and simple for multiple socket configurations on towing vehicle. Stabilizer jacks on all four corners for easy leveling with a single jack mounted on the tongue with caster wheel. All access doors have tiebacks to prevent doors from closing during operation of unit. Unit is equipped with a cowl residential type muffler for quiet operation. Safety chains come equipped with standard safety latch hooks. Other safety hooks and chain options available upon request.
Description: 30, 40, 50, 60 KW Mobile Genset
Scale: 1:16
Part number: J8524S-25
Description: 25 KW Freight Layout
Scale: 1:62
Part number: 25KW
CK///Power
30 KW standby trailer/ 60 KW standby trailer
30 KW mobile standby trailer base unit w/o options $ 23,125.00
60 KW mobile standby trailer base unit w/o options $ 32,000.00
Options
1) Solar panel with 1amp rating to maintain the life of the battery when being stored outside in the sun light. $ 151.43
2) 100amp standby power cord assembly 25 feet long with 100 amp pin and sleeve connectors on both ends. $ 1,214.29
3) 30 amp 240 volt 4 prong connector hard wired on 25 foot cable. Other connector configurations available upon request. $ 214.29
4) Rubber wheel chocks with storage boxes mounted inside entry doors.
Two pair. $ 107.15
5) 12 KW load bank kit installed in front panel assembly $ 1,071.43
6) Voltage selector switch assy. With box mtd. inside compartment. $ 1,964.29
7) Single pole connector panel assembly with connectors. 400a / 600 v (Note: see cable assemblies listed below, other length available) $ 1,431.43
8) Single pole lead assemblies. 4/0 cable 400 amp /600 volt.
a) neutral (white) 25 feet long $ 250.00
b) ground (green) 25 feet long $ 250.00
c) L1 (black) 25 feet long $ 250.00
d) L2(red) 25 feet long $ 250.00
e) L3( blue) 25 feet long $ 250.00
1