Wire and Metal Lath Accessories

SECTION 09205

WIRE AND METAL LATH ACCESSORIES

Display hidden notes to specifier. (Don't know how? Click Here)

** NOTE TO SPECIFIER ** Stockton Products; wire and metal lath accessory products.
.
This section is based on the products of Stockton Products, which is located at:
4675 Vandenberg Dr.
N. Las Vegas, NV 89081
Toll Free Tel: 877-862-5866
Tel: 702-651-1721
Fax: 702-651-1303
Email:request info ()
Web:
[Click Here] for additional information.
Stockton Products was founded in 1949, in response to construction demand in the Southwestern United States, particularly California. Exterior stucco applications were popular and widespread.
In 1989, Stockton acquired Casings Western, a roll-forming manufacturer of galvanized steel products. Subsequently known as C-West, the company has developed a complete metal trim line of soffit vents, decorative reveals, screeds, moisture management profiles and other trims which complements nicely the wire products which have long been associated with the Stockton Products name.
In 1995, with the growing use of extruded aluminum products for stucco and drywall, Stockton added extruded aluminum manufacturing. Stockton now carries the industry's most comprehensive line of both standard & custom reveal extruded aluminum moldings for stucco and drywall.

PART 1 GENERAL

1.1 SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

A. Lathing, Furring and Finishing Components for Gypsum Board, Plaster, and Stucco.

1.2 RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

A. Section 04700 - Manufactured Stone Veneer.

B. Section 05400 - Cold Formed Metal Framing.

C. Section 05800 - Expansion Control: Expansion Joint Assemblies.

D. Section 06100 - Rough Carpentry: Framing and Blocking.

E. Section 09210 - Gypsum Plaster: Finishes.

F. Section 09220 - Portland Cement Plaster: Stucco Finishes.

G. Section 09250 - Gypsum Board: Gypsum Board (Drywall) Finishes.

1.3 REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

A. ASTM A 580/A 580M - Standard Specification for Stainless Steel Wire.

B. ASTM A 641/A 641M - Standard Specification for Zinc- Coated (Galvanized) Carbon Steel Wire.

C. ASTM A 653/A 653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

D. ASTM A 921 - Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging

E. ASTM C 841 - Standard Specification for Installation of Interior Lathing and Furring

F. ASTM C 1047 - Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base.

G. ASTM C 1063 - Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster.

H. ASTM A 480/A 480M - Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip.

I. ASTM A 653/A 653M (Hot Dip Galvanized Coating)

J. ASTM A 924 - Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

K. ASTM B 69 - Standard Specification for Rolled Zinc

L. ASTM B152/B 152M - Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar.

M. ASTM B 209 - Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate.

N. ASTM B 221 - Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes.

1.4 SUBMITTALS

A. Submit under provisions of Section 01300.

B. Product Data: Manufacturer's data sheets on each product to be used, including:

1. Preparation instructions and recommendations.

2. Storage and handling requirements and recommendations.

3. Installation methods.

C. Shop Drawings: Submit manufacturer's approved shop drawings detailing the size and type of each product specified. Coordinate locations of components with the Finish Schedules listed in the Contract Drawings.

** NOTE TO SPECIFIER ** Delete the following paragraphs if LEED is not applicable.

D. LEED Submittals: Provide documentation of how the requirements of Credit will be met:

1. List of proposed materials with recycled content. Indicate post-consumer recycled content and pre-consumer recycled content for each product having recycled content.

2. Product data and certification letter indicating percentages by weight of post-consumer and pre-consumer recycled content for products having recycled content.

** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.

E. Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.

F. Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.

G. Manufacturer's Certificates: Certify products meet or exceed specified requirements.

1.5 QUALITY ASSURANCE

A. Manufacturer Qualifications: All primary products specified in this section will be supplied by a single manufacturer with a minimum of 10 years experience.

B. Installer Qualifications: All products listed in this section are to be installed by a single installer with a minimum of 5 years demonstrated experience in installing products of the same type and scope as specified.

** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

C. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.

1. Finish areas designated by Architect.

2. Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.

3. Refinish mock-up area as required to produce acceptable work.

1.6 DELIVERY, STORAGE, AND HANDLING

A. Store products in manufacturer's unopened packaging until ready for installation.

1.7 PROJECT CONDITIONS

A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: Stockton Products, which is located at: 4675 Vandenberg Dr.; N. Las Vegas, NV 89081; Toll Free Tel: 877-862-5866; Tel: 702-651-1721; Fax: 702-651-1303; Email:request info (); Web:

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01600.

** NOTE TO SPECIFIER ** Edit the following paragraphs as required and applicable to project requirements.

2.2 WIRE AND METAL LATH ACCESSORY PRODUCTS

A. Wire Products:

1. AA: ArchAid

a. Description: For smooth, symmetrical arches and inside and outside curves with minimal distortion. With standard 2-1/2 inch legs; one rigid and one flexible to allow tailoring to individual arch or curved radius.

b. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

c. Compliance: ASTM C 1047 and ASTM C 1063.

2. BNAA: Bullnose ArchAid:

a. Description: For smooth, symmetrical arches and inside and outside curves with minimal distortion. With standard 2-3/8 inch legs.

b. Radius:

** NOTE TO SPECIFIER ** Select radius required and delete the one not required.

1) 7/16 inch size.

2) 7/8 inch size.

c. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

d. Compliance: ASTM C 1047 and ASTM C 1063.

3. BNE: Bullnose E

a. Description: For rounded corners. With standard 2-3/8 inch legs.

b. Radius:

1) 7/16 inch size.

c. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A641M, G-60 ASTM A653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

d. Compliance: ASTM C 1047 and ASTM C 1063.

4. BNII: Bullnose II

a. Description: Double wire for strong rounded corners. With standard 2-3/8 inch legs; with additional line wires for easy installation.

b. Radius:

1) 7/16 inch size.

c. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

d. Compliance: ASTM C 1047 and ASTM C 1063.

5. BNR: Bullnose

a. Description: For strong rounded corners. With extra nose wire. With standard 2-3/8 inch legs.

b. Radius:

** NOTE TO SPECIFIER ** Select radius required and delete the one not required.

1) 7/16 inch size.

2) 7/8 inch size.

c. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

d. Compliance: ASTM C 1047 and ASTM C 1063.

6. BNS: Bullnose Stop

a. Description: Short stop for rounded lips and edges around doors, windows and wainscoting. One 2-1/2 inch and one short 1/2 inch leg.

b. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A641M, G-60 ASTM A653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

c. Compliance: ASTM C 1047 and ASTM C 1063.

7. BNSF: Bullnose Short Flange

a. Description: Used with Spanish or Mediterranean architecture for rounded corners, sills and ledges. With 2-1/2 inch leg and 1-1/2 inch leg. With extra nose wire for increased rigidity and stability.

b. Radius:

** NOTE TO SPECIFIER ** Select radius required and delete the one not required.

1) 7/16 inch size.

2) 7/8 inch size.

c. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

d. Compliance: ASTM C 1047 and ASTM C 1063.

8. CA: CornerAid

a. Description: Exterior corner reinforcing with conventional 3- coat 7/8 inch stucco. With five nose wire configuration that develops a strong rigid straight corner. With standard 2-3/8 inch legs.

b. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

c. Compliance: ASTM C 1047 and ASTM C 1063.

9. CRT: 2 x 2 Cornerite

a. Description: Interior piece with 2 inch legs for use as a plaster reinforcement on inside corners. Can be flattened for butterflies.

b. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

c. Compliance: ASTM C 1047 and ASTM C 1063.

10. DAB: Drywall Archbead

a. Description: High impact PVC bead to form a smooth, slightly rounded corners in high traffic areas. Recommended for use with acrylic finishes.

b. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

c. Compliance: ASTM C 1047 and ASTM C 1063.

11. DCB: Drywall Cornerbead

a. Description: Interior or exterior corner reinforcing for 1/4 inch or 3/8 inch stucco or plaster where a plastic or exposed nose is desired. Has an additional line wire on the outside edges to provide additional nail points. Recommended for use with acrylic finishes.

b. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

c. Compliance: ASTM C 1047 and ASTM C 1063.

12. GRS: 4 inch Roll Stripping

a. Description: Welded wire strip lath for use 3 coat stucco to prove keying of the stucco over plaster trims and accessories. Can be used for butterflies at doors and windows.

b. Materials:

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 18.5 Gauge.

13. LF: Long Flange

a. Description: Standard square corner design with 3-1/4 inch legs for use with fireproofing and when longer nailing legs are needed. Available with plastic nose (see PNLF).

b. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

c. Compliance: ASTM C 1047 and ASTM C 1063.

14. OC: One-Coat

a. Description: For use over an insulated foam board system, 1/4 inch to 3/8 inch EIFS and One Coat stucco. With standard 2-1/2 inch legs.

b. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

c. Compliance: ASTM C 1047 and ASTM C 1063.

15. OCSF: One-Coat Short Flange

a. Description: Multi-purpose exterior insulation "Hard Coat" and "One-Coat" systems. Useful around doors, windows, and as a "Return" or "Stop". Length of return flange is 1-1/4 inch and the other leg is 2-3/8 inches.

b. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

c. Compliance: ASTM C 1047 and ASTM C 1063.

16. OCSF34: 3/4 One-Coat Short Flange

a. Description: Multi-purpose piece for exterior insulation "Hard Coat" and "One-Coat" systems. Useful around doors, windows, and as a "Return" or "Stop". Length of flange is 3/4 inch with longer 3 inch back flange.

b. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

c. Compliance: ASTM C 1047 and ASTM C 1063.

17. PNAB: Plastic Nose Archbead

a. Description: For interior or exterior arches. Plastic Nose Archbead desirable in high humidity and salt air climates. Has standard 2-1/2 inch legs. May be curved during installation when encountering curved conditions. Recommended for use with acrylic finishes.

b. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

c. Compliance: ASTM C 1047 and ASTM C 1063.

18. PNCB: Plastic Nose Cornerbead

a. Description: Premium five nose wire CornerAid with a high impact, non-rusting plastic nose for heavy rain, high humidity and salt air climates. Useful with fireproofing for boxed and contoured "I" beams. Standard 2-1/2 inch legs. Recommended for use with acrylic finishes. Extra nose wires provide increased structural rigidity.

b. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

c. Compliance: ASTM C 1047 and ASTM C 1063.

19. PNDS: Plastic Nose Depth Screed

a. Description: Assists in controlling stucco or concrete depth and can act as a control joint inhibiting cracking. Also used in fireproofing applications. Recommended for use with acrylic finishes.

b. Ground:

** NOTE TO SPECIFIER ** Select ground size required and delete the one not required.

1) 3/4 inch.

2) 1 inch.

c. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

d. Compliance: ASTM C 1047 and ASTM C 1063.

20. PNLF: Plastic Nose Long-Flange

a. Description: Standard square corner design with a plastic nose. With 3-1/4 inch legs for use with fireproofing and when longer nailing legs are needed. Recommended for use with acrylic finishes.

b. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

c. Compliance: ASTM C 1047 and ASTM C 1063.

21. PNPOA: Plastic Nose PopOutAid

a. Description: Plastic Nose version of the PopOutAid shape when a plastic nose is required. Recommended for use with acrylic finishes and in high humidity environments.

b. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

22. PNSA: Plastic Nose StockAid

a. Description: Standard square corner with a plastic nose for use in high humidity environments. Recommended for use with acrylic finishes. 2-3/8 inch legs.

b. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

c. Compliance: ASTM C 1047 and ASTM C 1063.

23. PNSF: Plastic Nose Short Flange

a. Description: Standard short flange with plastic nose. Has one 1-1/2 inch leg and one 2-3/8 inch leg. Recommended for use with acrylic finishes.

b. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

c. Compliance: ASTM C 1047 and ASTM C 1063.

24. PNWA: Plastic Nose WeepAid

a. Description: Foundation screed for conventional 3-coat 7/8 inch stucco. WeepAid maximizes the weep area and reduces the opportunity for stucco to stain or crack. With a non-rust high impact PVC nose. Can be used to form pop-outs around windows and doors as well "Ginger-Bread" details. Recommended for use with acrylic finishes.

b. Flange:

** NOTE TO SPECIFIER ** Select flange size required and delete the one not required.

1) 7/8 inch.

2) 1-1/2 inch.

c. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

d. Compliance: ASTM C 1047 and ASTM C 1063.

25. POA: PopOutAid

a. Description: Used to create decorative Popouts and gingerbread details around windows and doors.

b. Materials:

** NOTE TO SPECIFIER ** Select material required and delete the one not required.

1) Galvanized wire ASTM A 641 / A 641M, G-60 ASTM A 653 /A 643M, 17.5 Gauge.

2) Stainless steel 316L ASTM A 580/A 580M, 17.5 Gauge wire.

3) Compliance: ASTM C 1047 and ASTM C 1063.

26. SAII: StockAid II

a. Description: DoubleWire with additional line wire on the outside edges to provide additional nail points. Three nose wire used for exterior corner reinforcing with conventional 3 coat 7/8 inch stucco. 2-3/8 inch legs