SHORT SPECIFICATION

FOR A

HEESEN YACHTS

50 M / 163’

SEMI-DISPLACEMENT

FULL ALUMINIUM MOTORYACHT

PROJECT: 18050

June 2015 page 1

18050 Aluminium FOR INFORMATION PURPOSES ONLY

SHORT SPECIFICATION 18050

GENERAL

HULL TYPE: TWIN PROPELLER MOTOR YACHT,

SEMI DISPLACEMENT, HARD CHINE

NAVAL ARCHITECT: HEESEN YACHTS

INTERIOR DESIGNER: Francesco Paszkowski

EXTERIOR STYLING: OMEGA ARCHITECTS

CLASSIFICATION: ABS X A1 Commercial Yachting Service

X AMS Large Commercial Yacht Code LY3

HULL: ALUMINIUM

SUPERSTRUCTURE: ALUMINIUM

DIMENSIONS

LENGTH OVER ALL: 49.80 METRES (163’ 4”)

BEAM OVER ALL: 9.00 METRES (29’ 6”)

DRAFT AT HALF LOAD: 2.51 METRES (8’ 3”)

DISPLACEMENT (HALF LOAD): APPROX. 313 TONS (690,000 LBS)

TONNAGE: APPROX. 499 GROSS TONS

TECHNICAL DETAILS

MAXIMUM SPEED (HALF LOAD): 23 KNOTS

RANGE: 3,100 NAUTICAL MILES AT 12 KNOTS

FUEL CAPACITY: 68,800 LITRES (18,175 US GALLON)

FRESH WATER CAPACITY: 16,200 LITRES (4,280 US GALLON)


PROPULSION SYSTEM

MAIN ENGINES: 2× MTU 16V 4000 M73L

MAXIMUM POWER: 2× 2,880 KILOWATT

GEARBOX: 2× ZF 9055A

ENGINE CONTROL: MTU BLUE VISION

PROPELLERS: 2× FIVE BLADE FIXED PITCH

GENERATORS: 2× KILO-PAK, EACH 99 KILOWATT, 50 HERTZ

BOWTHRUSTER: ELECTRICALLY DRIVEN MAKE ZF-MARINE

90 KILOWATT

STEERING SYSTEM: SPERRY MARINE SYSTEMS

STABILISERS: NAIAD DYNAMICS, 2 FINS, TYPE 720, ZERO SPEED

TECHNICAL

FRESH WATER MAKER: 2 x Idromar

CAPACITY 6,000 LITRES PER DAY EACH

(1,585 US GALLON)

HOT WATER BOILER: 2× 200 LITRES (2× 52.8 US GALLON)

SANITARY TREATMENT: HAMANN HL-CONT PLUS 02

AIR-CONDITIONING: HEINEN & HOPMAN

ANCHOR WINCH: 2× MAXWELL 11000 VWC

MOORING CAPSTAN: 2× MAXWELL 8000 VC

PASSARELLE: HYDROMAR

JACUZZI: SIENNA COMMERCIAL


TENDERS AND SPORTS EQUIPMENT

ONE 6.5M (21’ 4”) TENDER AND TWO 3M (9’ 10”) WATER SCOOTERS CAN BE STORED IN THE TENDER GARAGE AS PER GENERAL ARRANGEMENT PLAN.

LAUNCHING VIA TRANSOM DOOR WITH SLIDING SYSTEM.

THE MAXIMUM TENDER HEIGHT IS 1.5 M (4” 11”)

NOTES

This information is provided in good faith but without liability for error, omission or misrepresentation and it is subject to confirmation at the time of ordering and formal contract. This information is copyright of Heesen Yachts Sales BV and no unauthorised use, duplication or distribution is permitted. The Builder reserves the right to substitute the manufacturer or supplier of any item of equipment due to product changes, improvements, availability of supply, changes in regulations, technology, know-how, etc. provided that any substituted equipment shall be of equivalent or superior quality to that shown in this Specification.

END OF SPECIFICATION

June 2015 page 1

18050 Aluminium FOR INFORMATION PURPOSES ONLY