Copyright 2015 AIA MasterSpec Premium 03/15

PRODUCT MASTERSPEC LICENSED BY ARCOM TO STERN ENGINEERING, LTD.

Copyright 2015 by The American Institute of Architects (AIA)

Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA

This Product MasterSpec Section is licensed by ARCOM to Stern Engineering, Ltd. ("Licensee").

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section.

Revisions made to the original MasterSpec text are made solely by the Licensee and are not endorsed by, or representative of the opinions of, ARCOM or The American Institute of Architects (AIA). Neither AIA nor ARCOM are liable in any way for such revisions or for the use of this Product MasterSpec Section by any end user. A qualified design professional should review and edit the document to suit project requirements.

For more information, contact Stern Engineering, Ltd., 777 Passaic Avenue, Clifton, NJ 07012; Phone: 973.563.0105; Fax: 973.779.8768; Website: www.sternfaucets.com; Email: .

For information about MasterSpec contact ARCOM at (800) 424-5080 or visit www.MasterSpec.com.

SECTION 224216.13 - COMMERCIAL LAVATORIES

TIPS:

To view non-printing Editor's Notes that provide guidance for editing, click on MasterWorks/Single-File Formatting/Toggle/Editor's Notes.

To read detailed research, technical information about products and materials, and coordination checklists, click on MasterWorks/Supporting Information.

Revise this Section by deleting and inserting text to meet Project-specific requirements.

Verify that Section titles referenced in this Section are correct for this Project's Specifications; Section titles may have changed.

PART 1 - GENERAL

1.1  RELATED DOCUMENTS

Retain or delete this article in all Sections of Project Manual.

  1. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.

1.2  SUMMARY

  1. Section Includes:
  2. Lavatories.
  3. Shampoo bowls.
  4. Faucets.
  5. Supports.
  6. Related Requirements:

Retain subparagraphs below to cross-reference requirements Contractor might expect to find in this Section but are specified in other Sections.

  1. Section224100 "Residential Plumbing Fixtures" for residential lavatories.
  2. Section224300 "Medical Plumbing Fixtures" for healthcare lavatories.
  3. Section224600 "Security Plumbing Fixtures" for security lavatories.

1.3  ACTION SUBMITTALS

  1. Product Data: For each type of product.
  2. Include construction details, material descriptions, dimensions of individual components and profiles, and finishes for lavatories.
  3. Include rated capacities, operating characteristics, electrical characteristics, and furnished specialties and accessories.
  4. Sustainable Design Submittals:

"Product Data" Subparagraph below applies to LEED (including v4), IgCC, ASHRAE189.1, and Green Globes for fixtures and equipment that consume water.

  1. Product Data: For water consumption.

Retain "Shop Drawings" Paragraph below if automatic, electronic-sensor faucets are required for Project.

  1. Shop Drawings: Include diagrams for power, signal, and control wiring of automatic faucets.

1.4  INFORMATIONAL SUBMITTALS

Retain "Coordination Drawings" Paragraph below if coordination is required for installation of products and materials by separate installers.

  1. Coordination Drawings: Counter cutout templates for mounting of counter-mounted lavatories.

1.5  CLOSEOUT SUBMITTALS

  1. Operation and Maintenance Data: For lavatories and faucets to include in operation and maintenance manuals.

Retain first subparagraph below if automatic, electronic-sensor faucets are required for Project.

  1. In addition to items specified in Section017823 "Operation and Maintenance Data," include the following:
  2. Servicing and adjustments of automatic faucets.

1.6  MAINTENANCE MATERIAL SUBMITTALS

  1. Furnish extra materials that match products installed and that are packaged with protective covering for storage and identified with labels describing contents.
  2. Faucet Washers and O-Rings: Equal to [10] <Insert number> percent of amount of each type and size installed.
  3. Faucet Cartridges and O-Rings: Equal to [5] <Insert number> percent of amount of each type and size installed.

PART 2 - PRODUCTS

See Editing Instruction No.1 in the Evaluations for cautions about named manufacturers and products. For an explanation of options and Contractor's product selection procedures, see Section016000 "Product Requirements."

Do not use same lavatory designation as is used for another lavatory in Section224100 "Residential Plumbing Fixtures," Section224300 "Medical Plumbing Fixtures," and Section224600 "Security Plumbing Fixtures."

2.1  ENAMELED, CAST-IRON, COUNTER-MOUNTED LAVATORIES

Copy "Lavatory" Paragraph below and re-edit for each type of rectangular, flat-rim, enameled, cast-iron, flush-counter-mounted lavatory required.

Insert number to complete drawing designation. Use these designations on Drawings to identify each lavatory.

  1. Lavatory <Insert drawing designation>: Rectangular, flat rim, enameled, cast iron, flush counter mounted.
  2. Manufacturers: Subject to compliance with requirements, provide products by the following:
  3. Commercial Enameling Company.
  4. Insert manufacturer's name>.
  5. Fixture:
  6. Standard: ASMEA112.19.1/CSAB45.2.
  7. Type: For flush mounting with kit.
  8. Nominal Size: Rectangular, [18 by 15 inches (457 by 381 mm)] [20 by 18 inches (508 by 457 mm)].
  9. Faucet-Hole Punching: [Three holes, 2-inch (51-mm)] [Three holes, 4-inch (102-mm)] centers.
  10. Faucet-Hole Location: Top.
  11. Color: [White] <Insert color>.
  12. Mounting Materials: With stainless-steel ring, and sealant.
  13. Faucet: <Insert lavatory faucet designation from "Solid-Brass, Manually Operated Faucets" or "Solid-Brass, Automatically Operated Lavatory Faucets" Article>.

Copy "Lavatory" Paragraph below and re-edit for each type of oval, self-rimming, enameled, cast-iron, counter-mounted lavatory required.

Insert number to complete drawing designation. Use these designations on Drawings to identify each lavatory.

  1. Lavatory <Insert drawing designation>: Oval, self-rimming, enameled, cast iron, counter mounted.
  2. Manufacturers: Subject to compliance with requirements, provide products by the following:
  3. Kohler Co.
  4. Zurn Industries, LLC.
  5. Insert manufacturer's name>.
  6. Fixture:
  7. Standard: ASMEA112.19.1/CSAB45.2.
  8. Type: Self-rimming for above-counter mounting.
  9. Nominal Size: Oval, [20 by 17 inches (508 by 432 mm)] [24 by 18 inches (610 by 457 mm)] <Insert dimensions>.
  10. Faucet-Hole Punching: [One hole] [Three holes, 2-inch (51-mm) centers] [Three holes, 4-inch (102-mm) centers].
  11. Faucet-Hole Location: Top.
  12. Color: [White] <Insert color>.
  13. Mounting Material: Sealant.
  14. Faucet: <Insert lavatory faucet designation from "Solid-Brass, Manually Operated Faucets" or "Solid-Brass, Automatically Operated Lavatory Faucets" Article>.

Copy "Lavatory" Paragraph below and re-edit for each type of oval, enameled, cast-iron, undercounter-mounted lavatory required.

Insert number to complete drawing designation. Use these designations on Drawings to identify each lavatory.

  1. Lavatory <Insert drawing designation>: Oval, enameled, cast iron, undercounter mounted.
  2. Manufacturers: Subject to compliance with requirements, provide products by the following:
  3. Kohler Co.
  4. Insert manufacturer's name>.
  5. Fixture:
  6. Standard: ASMEA112.19.1/CSAB45.2.
  7. Type: For undercounter mounting.
  8. Nominal Size: Oval, [24 by 18 inches (610 by 457 mm)] <Insert dimensions>.
  9. Faucet-Hole Punching: No holes.
  10. Faucet-Hole Location: On countertop.
  11. Color: [White] <Insert color>.
  12. Mounting Materials: Sealant and undercounter mounting kit.
  13. Faucet: <Insert lavatory faucet designation from "Solid-Brass, Manually Operated Faucets" or "Solid-Brass, Automatically Operated Lavatory Faucets" Article>.

2.2  VITREOUS-CHINA, COUNTER-MOUNTED LAVATORIES

Copy "Lavatory" Paragraph below and re-edit for each type of rectangular, self-rimming, vitreous-china, counter-mounted lavatory required.

Insert number to complete drawing designation. Use these designations on Drawings to identify each lavatory.

  1. Lavatory <Insert drawing designation>: Rectangular, self-rimming, vitreous china, counter mounted.
  2. Manufacturers: Subject to compliance with requirements, provide products by the following:
  3. American Standard America.
  4. Crane Plumbing, L.L.C.
  5. Gerber Plumbing Fixtures LLC.
  6. Kohler Co.
  7. TOTO USA, INC.
  8. Insert manufacturer's name>.
  9. Fixture:
  10. Standard: ASMEA112.19.2/CSAB45.1.
  11. Type: Self-rimming for above-counter mounting.
  12. Nominal Size: Rectangular, [21 by 19 inches (533 by 483 mm)] [24 by 20 inches (610 by 508 mm)] <Insert dimensions>.
  13. Faucet-Hole Punching: [One hole] [Three holes, 2-inch (51-mm) centers] [Three holes, 4-inch (102-mm) centers].
  14. Faucet-Hole Location: Top.
  15. Color: [White] <Insert color>.
  16. Mounting Material: Sealant.
  17. Faucet: <Insert lavatory faucet designation from "Solid-Brass, Manually Operated Faucets" or "Solid-Brass, Automatically Operated Lavatory Faucets" Article>.

Copy "Lavatory" Paragraph below and re-edit for each type of oval and round self-rimming, vitreous-china, counter-mounted lavatory required.

Insert number to complete drawing designation. Use these designations on Drawings to identify each lavatory.

  1. Lavatory <Insert drawing designation>: [Oval] [Round], self-rimming, vitreous china, counter mounted.
  2. Manufacturers: Subject to compliance with requirements, provide products by the following:
  3. American Standard America.
  4. Briggs Plumbing Products, Inc.
  5. Capizzi.
  6. Crane Plumbing, L.L.C.
  7. FNW; Ferguson Enterprises, Inc.
  8. Gerber Plumbing Fixtures LLC.
  9. Kohler Co.
  10. Mansfield Plumbing Products LLC.
  11. Peerless Pottery Sales, Inc.
  12. TOTO USA, INC.
  13. Zurn Industries, LLC.
  14. Insert manufacturer's name>.
  15. Fixture:
  16. Standard: ASMEA112.19.2/CSAB45.1.
  17. Type: Self-rimming for above-counter mounting.

Retain one of two "Nominal Size" subparagraphs below. Retain first for oval lavatories and second for round lavatories.

  1. Nominal Size: Oval, [19 by 17 inches (483 by 432 mm)] [20 by 17 inches (508 by 432 mm)] <Insert dimensions>.
  2. Nominal Size: Round, [19 inches (483 mm)] <Insert dimension>.
  3. Faucet-Hole Punching: [One hole] [Three holes, 2-inch (51-mm) centers] [Three holes, 4-inch (102-mm) centers].
  4. Faucet-Hole Location: Top.
  5. Color: [White] <Insert color>.
  6. Mounting Material: Sealant.
  7. Faucet: <Insert lavatory faucet designation from "Solid-Brass, Manually Operated Faucets" or "Solid-Brass, Automatically Operated Lavatory Faucets" Article>.

Copy "Lavatory" Paragraph below and re-edit for each type of oval, vitreous-china, undercounter-mounted lavatory required.

Insert number to complete drawing designation. Use these designations on Drawings to identify each lavatory.

  1. Lavatory <Insert drawing designation>: Oval, vitreous china, undercounter mounted.
  2. Manufacturers: Subject to compliance with requirements, provide products by the following:
  3. American Standard America.
  4. Capizzi.
  5. Crane Plumbing, L.L.C.
  6. FNW; Ferguson Enterprises, Inc.
  7. Gerber Plumbing Fixtures LLC.
  8. Kohler Co.
  9. Mansfield Plumbing Products LLC.
  10. Peerless Pottery Sales, Inc.
  11. Sloan Valve Company.
  12. TOTO USA, INC.
  13. Zurn Industries, LLC.
  14. Insert manufacturer's name>.
  15. Fixture:
  16. Standard: ASMEA112.19.2/CSAB45.1.
  17. Type: For undercounter mounting.
  18. Nominal Size: Oval, [19 by 16 inches (483 by 406 mm)] [22 by 14 inches (559 by 356 mm)] [23 by 15 inches (584 by 381 mm)] <Insert dimensions>.
  19. Faucet-Hole Punching: No holes.
  20. Faucet-Hole Location: On countertop.
  21. Color: [White] <Insert color>.
  22. Mounting Material: Sealant and undercounter mounting kit.
  23. Faucet: <Insert lavatory faucet designation from "Solid-Brass, Manually Operated Faucets" or "Solid-Brass, Automatically Operated Lavatory Faucets" Article>.

2.3  ENAMELED, CAST-IRON, WALL-MOUNTED LAVATORIES

Copy "Lavatory" Paragraph below and re-edit for each type of rectangular, enameled, cast-iron, wall-mounted lavatory required.

Insert number to complete drawing designation. Use these designations on Drawings to identify each lavatory.

  1. Lavatory <Insert drawing designation>: Rectangular, enameled, cast iron, wall mounted.
  2. Manufacturers: Subject to compliance with requirements, provide products by the following:
  3. American Standard America.
  4. Commercial Enameling Company.
  5. Gerber Plumbing Fixtures LLC.
  6. Kohler Co.
  7. Zurn Industries, LLC.
  8. Insert manufacturer's name>.
  9. Fixture:
  10. Standard: ASMEA112.19.1/CSAB45.2.
  11. Type: Straight-front apron with straight back.
  12. Nominal Size: Rectangular, [19 by 17 inches (483 by 432 mm)] [20 by 18 inches (508 by 457 mm)].
  13. Faucet-Hole Punching: [One hole] [Three holes, 2-inch (51-mm) centers] [Three holes, 4-inch (102-mm) centers].
  14. Faucet-Hole Location: Top.
  15. Color: [White] <Insert color>.
  16. Mounting Material: Wall bracket.
  17. Faucet: <Insert lavatory faucet designation from "Solid-Brass, Manually Operated Faucets" or "Solid-Brass, Automatically Operated Lavatory Faucets" Article>.

Coordinate "Support" Subparagraph below with "Supports" Article.

  1. Support: [TypeIII lavatory carrier.][Include rectangular, steel uprights.] <Insert carrier>.
  2. Lavatory Mounting Height: [Standard] [Child] [Handicapped/elderly according to ICCA117.1].

Copy "Lavatory" Paragraph below and re-edit for each type of corner, enameled, cast-iron, wall-mounted lavatory required.

Insert number to complete drawing designation. Use these designations on Drawings to identify each lavatory.

  1. Lavatory <Insert drawing designation>: Corner, enameled, cast iron, wall mounted.
  2. Manufacturers: Subject to compliance with requirements, provide products by the following:
  3. Kohler Co.
  4. Insert manufacturer's name>.
  5. Fixture:
  6. Standard: ASMEA112.19.1/CSAB45.2.
  7. Type: Three-sided-front apron with three-sided back.
  8. Nominal Size: Corner, 11 by 11 inches (279 by 279 mm).
  9. Faucet-Hole Punching: Three holes, 2-inch (51-mm) centers.
  10. Faucet-Hole Location: Top.
  11. Color: [White] <Insert color>.
  12. Mounting Material: Wall brackets.
  13. Faucet: Manufacturer's standard; factory installed.

Coordinate "Support" Subparagraph below with "Supports" Article.

  1. Support: [Type III lavatory carrier] with two hanger plates made for corner lavatories.[Include rectangular, steel uprights.] <Insert carrier.
  2. Lavatory Mounting Height: [Standard] [Child] [Handicapped/elderly according to ICCA117.1].

2.4  VITREOUS-CHINA, WALL-MOUNTED LAVATORIES

Copy "Lavatory" Paragraph below and re-edit for each type of vitreous-china, wall-mounted lavatory with back required.

Insert number to complete drawing designation. Use these designations on Drawings to identify each lavatory.

  1. Lavatory <Insert drawing designation>: Vitreous china, wall mounted, with back.
  2. Manufacturers: Subject to compliance with requirements, provide products by the following:
  3. American Standard America.
  4. Briggs Plumbing Products, Inc.
  5. Crane Plumbing, L.L.C.
  6. FNW; Ferguson Enterprises, Inc.
  7. Gerber Plumbing Fixtures LLC.
  8. Kohler Co.
  9. Mansfield Plumbing Products LLC.
  10. Peerless Pottery Sales, Inc.
  11. Sloan Valve Company.
  12. Zurn Industries, LLC.
  13. Insert manufacturer's name>.
  14. Fixture:
  15. Standard: ASMEA112.19.2/CSAB45.1.
  16. Type: For wall hanging.
  17. Nominal Size: Oval, [19 by 16 inches (483 by 406 mm)] [22 by 14 inches (559 by 356 mm)] [23 by 15 inches (584 by 381 mm)] <Insert dimensions>.
  18. Faucet-Hole Punching: [One hole] [Three holes, 2-inch (51-mm) centers] [Three holes, 4-inch (102-mm) centers].
  19. Faucet-Hole Location: Top.
  20. Color: [White] <Insert color>.
  21. Mounting Material: Chair carrier.
  22. Faucet: <Insert lavatory faucet designation from "Solid-Brass, Manually Operated Faucets" or "Solid-Brass, Automatically Operated Lavatory Faucets" Article>.

Coordinate "Support" Subparagraph below with "Supports" Article.

  1. Support: [TypeI, exposed-arm lavatory carrier] [TypeII, concealed-arm lavatory carrier] [TypeII, concealed-arm lavatory carrier with escutcheons].[Include rectangular, steel uprights.]
  2. Lavatory Mounting Height: [Standard] [Child] [Handicapped/elderly according to ICCA117.1].

Copy "Lavatory" Paragraph below and re-edit for each type of ledge-back, vitreous-china, wall-mounted lavatory required.

Insert number to complete drawing designation. Use these designations on Drawings to identify each lavatory.

  1. Lavatory <Insert drawing designation>: Ledge back, vitreous china, wall mounted.
  2. Manufacturers: Subject to compliance with requirements, provide products by the following:
  3. American Standard America.
  4. Briggs Plumbing Products, Inc.
  5. Crane Plumbing, L.L.C.
  6. FNW; Ferguson Enterprises, Inc.
  7. Gerber Plumbing Fixtures LLC.
  8. Kohler Co.
  9. Mansfield Plumbing Products LLC.
  10. Peerless Pottery Sales, Inc.
  11. Sloan Valve Company.
  12. Insert manufacturer's name>.
  13. Fixture:
  14. Standard: ASMEA112.19.2/CSAB45.1.
  15. Type: For wall hanging.
  16. Nominal Size: Oval, [19 by 16 inches (483 by 406 mm)] [22 by 14 inches (559 by 356 mm)] [23 by 15 inches (584 by 381 mm)] <Insert dimensions>.
  17. Faucet-Hole Punching: [One hole] [Three holes, 2-inch (51-mm) centers] [Three holes, 4-inch (102-mm) centers].
  18. Faucet-Hole Location: Top.
  19. Color: [White] <Insert color>.
  20. Mounting Material: Chair carrier.
  21. Faucet: <Insert lavatory faucet designation from "Solid-Brass, Manually Operated Faucets" or "Solid-Brass, Automatically Operated Lavatory Faucets" Article>.

Coordinate "Support" Subparagraph below with "Supports" Article.

  1. Support: [TypeI, exposed-arm lavatory carrier] [TypeII, concealed-arm lavatory carrier] [TypeII, concealed-arm lavatory carrier with escutcheons].[Include rectangular, steel uprights.] <Insert carrier.
  2. Lavatory Mounting Height: [Standard] [Child] [Handicapped/elderly according to ICCA117.1].

Copy "Lavatory" Paragraph below and re-edit for each type of slab-type, vitreous-china, wall-mounted lavatory required.