PLEASE SELECT FROM THE FOLLOWING:
Regular Service
Siding identification and/or similar siding suggestions with product locator service returned in 5 business days. / $100
Expedited Service
Siding identification and/or similar siding suggestions with product locator service returned in 2 business days. / $150
Nationwide search for discontinued material. (Must be selected in conjunction with one of the above.) A search is completed for discontinued new material. Fees are assessed only if material is located sufficient to meet your needs. / +$50
if located

Please check if you are a Homeowner, Insurance adjuster, Contractor

Reports will only be released by authorization of the paying party.

Step one

BILLING INFORMATION / Check if same. / CONTACT INFORMATION
Contact Name / Contact Name
Company / Company
Address / Address
Address / Address
City, State, Zip / City, State, Zip
Phone / Phone
Fax / Fax
Email / Email

Liability limited to return of fees collected if information found to be incorrect.

Adjuster’s Name: / Claim #:
Claim zipcode: / Insured’s last name:

(Siding distributorinformation for this location will be included on your report.)

Siding amounts and damage info (check or fill in correct information)

Step Two

Number of damaged elevations (sides): / 1 / 2 / 3 / More than 3
Number of undamaged elevations (sides): / 1 / 2 / 3 / More than 3

Approximate amount of damaged siding ______sq.ft.

This information is needed for a discontinued material search.

Siding damaged by: / Hail / Wind / Fire / Auto / Vandalism / Flood / Other

Siding age if age known or yourbest guess ______(circle known or best guess)

Color and Name (check or fill in correct information)

Step three

Very faded Like New
Describe color at overlap:
5=very faded 1=like new / 5 / 4 / 3 / 2 / 1

What siding manufacturer and series do think it might be? ______

ManufacturerSeries

What color would you describe the siding to be? ______

Was the siding previously painted YES NO

Please enter your Dutch Lap’ dimensions below.

Step four

The Dutch lap or center cove portion of the siding has many different dimensions we NEED this measurement in order to identify your siding. You may check the profile on page 3.


Common Size or Profile (checkthe PROFILE /size of your siding)

Step five

Pleasecheck  theprofile or size of your siding.


DOUBLE / Double 3 ¾”
Double 4”
Double 4 ½”
Double 5”
Double 6” /
TRIPLE & Quad / Triple 2.33
Triple 3”
Triple 3.33”
Quad 4”
Quad 4” Dutch lap

DUTCHLAP / Double 3 ¾” Dutch lap
Double 4” Dutch lap
Double 4 ½” dutchlap
Double 5” Dutch lap
complete measurement on page 2 /
BEADED / Beaded 6”
Beaded 6.5”
Beaded 7”
Beaded 7.5”
Beaded 8”

SINGLE / Single 6.25”
Single 7”
Single 7.5”
Single 8” /
Shake and shingle / Shake (rough)
Shingle (smooth)
Shingle (rough sawn)
Shingle (scallop)
VERTICAL
Measure V groove to V groove. / Vertical 3 ¾”
Vertical 4”
Vertical 5”
Vertical 6”
Vertical 8”
Vertical 10”
Vertical 12” /
Board & Batten
measure center to center of batten / B & B 6”
B& B 7”
B & B 8”
B & B 10”
B & B 12”

If you have a unique profile - describe and place dimensions here.

(Please note what siding you have here, if known.)

Page 1 of 3 “Solving the siding puzzle”- SidingMatch.com 02/2004

Copyright SidingMatch 2000