SAFETY PROGRAM
INTERNAL COMBUSTION ENGINES,
NOT ELSEWHERE CLASSIFIED
SIC CODE 3519
For further information on safety programs developed by the Division of Safety of Florida's Department of Labor and Employment Security, call 904/488-3044 or
800/367-4378 (within Florida).
Material contained in this publication is in the public domain and may be reproduced, fully or partially, without permission of the State of Florida.
May, 1994
PREFACE
How to Use This Manual
To The Employer:
The purpose of this safety manual is to establish standards for an industry-specific safety program for establishments covered under the following Standard Industrial Classification (SIC code): 3519, Internal Combustion Engines, Not Elsewhere Classfied. This safety program has been developed by the Florida Division of Safety with voluntary input from Florida employers, workers' compensation insurance carriers, labor organizations, trade associations, and other industry leaders.
This manual is intended to serve as the basis for an employer integrated safety and health management program. Implementation of this safety program satisfies the requirements of the Division of Safety. The essential elements of this program include: top management's commitment and involvement; the establishment and operation of safety committees; provisions for safety and health training; first aid procedures; accident investigations; recordkeeping of injuries; and workplace safety rules, policies, and procedures.
If this manual meets the needs of your establishment, it may be used exactly as written. If you have previously established and are maintaining a safety program, you can continue to use your program provided that the essential elements covered in this safety program are also addressed in your program. Use of all or part of this manual does not relieve employers of their responsibility to comply with other applicable local, state or federal laws. In addition, if an employer maintains the OSHA 200 Log to meet federal requirements, then that will meet the log and summary requirements of the LES SAF 200 form in Section VI of this program.
It is intended that this manual be enhanced and continuously improved by the employer. Any section of this manual may be modified by the employer to accommodate actual operations and work practices, provided that the original intent of that section is not lost. For example, if a safety committee meets weekly or quarterly instead of monthly, then Section II of the manual should be amended to accommodate this practice. If there is a safety rule, policy, or procedure appropriate for the work or work environment which has not been included, or if a rule included in Section VII is inappropriately written, then a new safety rule, policy, or procedure should be added to improve the manual. Likewise, if a specific rule in the Safety Rules, Policies, and Procedures section does not apply because the equipment or work operation described is not used, then that specific rule should be crossed out or deleted from the manual. If accidents occur, new safety rules should be developed and incorporated in Section VII of this manual to prevent their recurrence.
TABLE OF CONTENTS
Preface 3
Table of Contents 4
Section I - Management Commitment and Involvement
Policy Statement 1
Section II - Safety Committee
Safety Committee Organization 3
Responsibilities 3
Meetings II.1
Meeting Minutes II.2
Section III - Safety and Health Training
Safety and Health Orientation 1
Job-Specific Training 1
Periodic Retraining of Employees III.1
Section IV - First Aid Procedures
Minor First Aid Treatment 1
Non-Emergency Medical Treatment 1
Emergency Medical Treatment 1
First Aid Training 1
First Aid Instructions 3
Section V - Accident Investigation
Accident Investigation Procedures 1
Investigation Report Form 2
Instructions for Report Form 3
Section VI - Recordkeeping Procedures
Recordkeeping Procedures 5
First Notice of Injury DWC-1 2
LES SAF 200 Form 3
Section VII - Safety Rules, Policies, and Procedures
Safety Rules, Policies, and Procedures 1
Section I.
MANAGEMENT COMMITMENT AND INVOLVEMENT
POLICY STATEMENT
The management of this organization is committed to providing employees with a safe and healthful workplace. It is the policy of this organization that employees report unsafe conditions and do not perform work tasks if the work is considered unsafe. Employees must report all accidents, injuries, and unsafe conditions to their supervisors. No such report will result in retaliation, penalty, or other disincentive.
Employee recommendations to improve safety and health conditions will be given thorough consideration by our management team. Management will give top priority to and provide the financial resources for the correction of unsafe conditions. Similarly, management will take disciplinary action against an employee who willfully or repeatedly violates workplace safety rules. This action may include verbal or written reprimands and may ultimately result in termination of employment.
The primary responsibility for the coordination, implementation, and maintenance of our workplace safety program has been assigned to:
Name:
Title: Telephone:
Senior management will be actively involved with employees in establishing and maintaining an effective safety program. Our safety program coordinator, myself, or other members of our management team will participate with you or your department's employee representative in ongoing safety and health program activities, which include:
• Promoting safety committee participation;
• Providing safety and health education and training; and
• Reviewing and updating workplace safety rules.
This policy statement serves to express management's commitment to and involvement in providing our employees a safe and healthful workplace. This workplace safety program will be incorporated as the standard of practice for this organization. Compliance with the safety rules will be required of all employees as a condition of employment.
Signature of CEO/President Date
Section II.
SAFETY COMMITTEE
Safety Committee Organization
A safety committee has been established as a management tool to recommend improvements to our workplace safety program and to identify corrective measures needed to eliminate or control recognized safety and health hazards. The safety committee employer representatives will not not exceed the amount of employee representatives.
Responsibilities
The safety committee will be responsible for assisting management in communicating procedures for evaluating the effectiveness of control measures used to protect employees from safety and health hazards in the workplace.
The safety committee will be responsible for assisting management in reviewing and updating workplace safety rules based on accident investigation findings, any inspection findings, and employee reports of unsafe conditions or work practices; and accepting and addressing anonymous complaints and suggestions from employees.
The safety committee will be responsible for assisting management in updating the workplace safety program by evaluating employee injury and accident records, identifying trends and patterns, and formulating corrective measures to prevent recurrence.
The safety committee will be responsible for assisting management in evaluating employee accident and illness prevention programs, and promoting safety and health awareness and co-worker participation through continuous improvements to the workplace safety program.
Safety committee members will participate in safety training and be responsible for assisting management in monitoring workplace safety education and training to ensure that it is in place, that it is effective, and that it is documented.
Management will provide written responses to safety committee written recommendations.
Meetings
Safety committee meetings are held quarterly and more often if needed and each committee member will be compensated at his or her hourly wage when engaged in safety committee activities .
Management will post the minutes of each meeting (see page 5) in a conspicuous place and the minutes will be available to all employees.
All safety committee records will be maintained for not less than three calendar years.
SAFETY COMMITTEE MINUTES
Date of Committee Meeting: Time: Minutes Prepared By: Location:
Members in Attendance
Name Name Name
Previous Action Items:
Review of Accidents Since Previous Meeting:
Recommendations for Prevention:
Recommendations from Anonymous Employees:
Suggestions From Employees:
Recommended Updates To Safety Program:
Recommendations from Accident Investigation Reports:
Safety Training Recommendations:
Comments:
Section III.
SAFETY AND HEALTH TRAINING
Safety and Health Orientation
Workplace safety and health orientation begins on the first day of initial employment or job transfer. Each employee has access to a copy of this safety manual, through his or her supervisor, for review and future reference, and will be given a personal copy of the safety rules, policies, and procedures pertaining to his or her job. Supervisors will ask questions of employees and answer employees' questions to ensure knowledge and understanding of safety rules, policies, and job-specific procedures described in our workplace safety program manual.
All employees will be instructed by their supervisors that compliance with the safety rules described in the workplace safety manual is required.
Job-Specific Training
• Supervisors will initially train employees on how to perform assigned job tasks safely.
• Supervisors will carefully review with each employee the specific safety rules, policies, and procedures that are applicable and that are described in the workplace safety manual.
• Supervisors will give employees verbal instructions and specific directions on how to do the work safely.
• Supervisors will observe employees performing the work. If necessary, the supervisor will provide a demonstration using safe work practices, or remedial instruction to correct training deficiencies before an employee is permitted to do the work without supervision.
• All employees will receive safe operating instructions on seldom-used or new equipment before using the equipment.
• Supervisors will review safe work practices with employees before permitting the performance of new, non-routine, or specialized procedures.
Periodic Retraining of Employees
All employees will be retrained periodically on safety rules, policies and procedures, and when changes are made to the workplace safety manual.
Individual employees will be retrained after the occurrence of a work-related injury caused by an unsafe act or work practice, and when a supervisor observes employees displaying unsafe acts, practices, or behaviors.
Section IV.
FIRST AID PROCEDURES
EMERGENCY PHONE NUMBERS
Safety Coordinator Poison Control
First Aid Fire Department
Ambulance Police
Medical Clinic
Clinic Address
Minor First Aid Treatment
First aid kits are kept in the front office and in the employee lounge. If you sustain an injury or are involved in an accident requiring minor first aid treatment:
• Inform your supervisor.
• Administer first aid treatment to the injury or wound.
• If a first aid kit is used, indicate usage on the accident investigation report.
• Access to a first aid kit is not intended to be a substitute for medical attention.
• Provide details for the completion of the accident investigation report.
Non-Emergency Medical Treatment
For non-emergency work-related injuries requiring professional medical assistance, management must first authorize treatment. If you sustain an injury requiring treatment other than first aid:
• Inform your supervisor.
• Proceed to the posted medical facility. Your supervisor will assist with transportation, if necessary.
• Provide details for the completion of the accident investigation report.
Emergency Medical Treatment
If you sustain a severe injury requiring emergency treatment:
• Call for help and seek assistance from a co-worker.
• Use the emergency telephone numbers and instructions posted next to the telephone in your work area to request assistance and transportation to the local hospital emergency room.
• Provide details for the completion of the accident investigation report.
First Aid Training
Each employee will receive training and instructions from his or her supervisor on our first aid procedures.
FIRST AID INSTRUCTIONS
In all cases requiring emergency medical treatment, immediately call, or have a co-worker call, to request
emergency medical assistance.
WOUNDS:
Minor: Cuts, lacerations, abrasions, or punctures
• Wash the wound using soap and water; rinse it well.
• Cover the wound using clean dressing.
Major: Large, deep and bleeding
• Stop the bleeding by pressing directly on the wound, using a bandage or cloth.
• Keep pressure on the wound until medical help arrives.
BROKEN BONES:
• Do not move the victim unless it is absolutely necessary.
• If the victim must be moved, "splint" the injured area. Use a board, cardboard, or rolled newspaper as a splint.
BURNS:
Thermal (Heat)
• Rinse the burned area, without scrubbing it, and immerse it in cold water; do not use ice water.
• Blot dry the area and cover it using sterile gauze or a clean cloth.
Chemical
• Flush the exposed area with cool water immediately for 15 to 20 minutes.
EYE INJURY:
Small particles
• Do not rub your eyes.
• Use the corner of a soft clean cloth to draw particles out, or hold the eyelids open and flush the eyes continuously with water.
Large or stuck particles
• If a particle is stuck in the eye, do not attempt to remove it.
• Cover both eyes with bandage.
Chemical
• Immediately irrigate the eyes and under the eyelids, with water, for 30 minutes.
NECK AND SPINE INJURY:
• If the victim appears to have injured his or her neck or spine, or is unable to move his or her arm or leg, do not attempt to move the victim unless it is absolutely necessary.
HEAT EXHAUSTION:
• Loosen the victim's tight clothing.
• Give the victim "sips" of cool water.
• Make the victim lie down in a cooler place with the feet raised.
Section V.
ACCIDENT INVESTIGATION
Accident Investigation Procedures
An accident investigation will be performed by the supervisor at the location where the accident occurred. The safety coordinator is responsible for seeing that the accident investigation reports (see page 2) are being filled out completely, and that the recommendations are being addressed. Supervisors will investigate all accidents, injuries, and occupational diseases using the following investigation procedures:
• Implement temporary control measures to prevent any further injuries to employees.
• Review the equipment, operations, and processes to gain an understanding of the accident situation.