MATERIAL SAFETY DATA SHEET
GOLDEN ENVIRO SUPER SOLIDIFIER
01/01/2014
SECTION 1 Product and Company Identification
Manufacturer's name:Emergency phone number
Spill - Cents(877) 642-7632
Manufactured for: Golden Environmental Products Inc.
2207 Simcoe Rd. 93, Barrie, On L4M 4Y8 (705) 792-0418
SECTION 2 Composition / Information on Ingredients
Hazardous ComponentsNone
Specific Chemical Identity Common NamesOSHA ACGIH TLV% optional
Sodium polyacrylate cross linked 20NENE
CAS NUMBER 09003-04-7
OSHA PEL:15 mg/m3 total dust
10mg/m3 repairable dust
10mg/m3 other N.A.
No detectable crystalline silica, using x-ray diffraction and microscopic analysis
CAS NO: 93763-70-3
Section 3 - Physical/Chemical Characteristics
Boiling PointSolidBulk density (apparent - g/cc )0.5_0.7
Vapor Pressure (mmhg.)LT10Melting PointGreater than 390 F
Vapor Density (Air=1)NilEvaporation Rate (Butyl Acetate=1) less than 1
Water SolubilityInsoluble
Appearance and odorWhite granular powder
Section 4 - Fire and Explosion Hazard Data
Flash PointNone Flammable
Flammable LimitsNone Flammable
LEL: NoneUEL: None
Extinguishing MediaNone Applicable /Unused
Page 1 of 3
Golden Environmental Products Inc., P.O . Box 20113, Barrie, ON L4M 6E9
P 705.792.0418 F 705.721.1599 T 877.642.7632
Section 5 Reactive Data
StabilityStable
Conditions to avoidNone
Incompatibility (materials to avoid)Hydrofluoric acid
Hazardous Decomposition or by-productsNone Known
Hazardous PolymerizationMay not occur – xConditions to avoidnone known
Section 6 Health Hazard Data
Routes of EntryInhalation X Ingestion X
Signs and Symptoms of exposureNone
Persons sensitive to inert dust may experience coughing when exposed to heavy concentration of airborne material. If dust particles lodge in eyes, use standard eye wash solutions or water and allow eyes to clear.
Section 7Precautions for Safe Handling and Use
Steps to be taken in case material released or spilled - Collect material, avoid airborne dust / Avoid contact with water/ becomes slippery
Waste Disposal Method - material must be disposed of in Compliance with MSDS of collected matter.
IF PRODUCT IS USED TO SOLIDIFY A FLAMMABLE LIQUID, PLEASE TAKE NOTE: PRODUCT WILL BECOME FLAMMABLE FROM VAPORS and FUMES from OVER SATURATION.
AVOID IGNITION BY SPARKS OR FLAMES.
SECTION 8 - Special Notes
LEACH ABILITY: this product satisfies the parameters set in the U.S. Environmental Protection Agency (EPA) TCLP (Toxicity characteristics leaching procedure - method ASTM D2974)
The LRT (liquid release test EPA method 9096) Paint Filter Test EPA Method 9095
These tests serve merely to illustrate that when used properly this product will not leach absorbed liquids when disposed of.
SECTION 9 – Other Information
Disclaimer
The information provided on this MSDS is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other material or in any process, unless specified in the text. Furthermore, as the conditions of use are beyond the control of Spill-Cents, it is the responsibility of the customer to determine the conditions of safe use of these products.
Page 1 of 3
Golden Environmental Products Inc., P.O . Box 20113, Barrie, ON L4M 6E9
P 705.792.0418 F 705.721.1599 T 877.642.7632