WELD 105
Section 1002
Drawing and Weld Symbol Interpretation
Syllabus
Fall 2017
Instructor: Steven Scilacci
Office: GTA 108
Phone: 775-753-2207
Email:
Office Hours: Monday - Thursday 11:05am - 12:20pm
Course Information
Course Title: Drawing and Weld Symbol Interpretation
Course Number: WELD 105
Course Discipline: Welding
Course Description: This course is designed to teach the students elements of conventional print reading along with the symbols used in today’s welding industry. The student will need to complete assignments on time to receive full credit.
Course Prerequisites: None
Course Time: 9:00am – 11:00am, Tuesday and Thursday,
08/22/2017 – 11/02/2017
Course Location: Welding Class room
Course Credits: 3 Credits
Textbooks
Required Textbooks: Welding Print Reading, John R. Walker, W. Richard Polanin, (ISBN: 978-1-60525-911-6)
Math for Welders, Nino Marion, (ISBN: 978-1-60525-900-0)
Learner Expected Outcomes
Upon completion of this course, the students will:
Ø Define and describe the parts of a print. (1), (2), (3)
Ø Describe the advantages of developing drawings with a CAD system. (1), (2), (3)
Ø List precautions in the care of prints. (1), (2), (3)
Ø Identify the two measurement systems used on prints. (1), (2), (3)
Ø Read a fractional inch, decimal inch, and metric graduated rule. (1), (2), (3)
Ø Convert linear measurements between units. (1), (2), (3)
Ø Convert between decimal fractions and common fractions. (1), (2), (3)
Ø Add, subtract, multiply, and divide fractions. (1), (2), (3)
Ø Add, subtract, multiply, and divide decimal fractions. (1), (2), (3)
Ø Add, subtract, multiply, and divide metric decimals. (1), (2), (3)
Ø Use a conversion chart to convert fractions to decimals, decimals to fractions, U.S. customary units to metric units, and metric units to U.S. customary units. (1), (2), (3)
Ø Identify the types of lines found on a print. (1), (2), (3)
Ø Describe the proper use of types of lines found on a print. (1), (2), (3)
Ø Identify and explain the significance of the principal views on a multi-view drawing. (1), (2), (3)
Ø Recognize and explain uses of an auxiliary view and the principal view from which it is projected. (1), (2), (3)
Ø Explain how the major types of section views are read and used on a print. (1), (2), (3)
Ø Identify methods to read prints. (1), (2), (3)
Ø Describe two types of working drawings. (1), (2), (3)
Ø Explain the similarities and differences among types of working drawings and specialized drawings. (1), (2), (3)
Ø Identify information found on a parts list. (1), (2), (3)
Ø Interpret a variety of print formats that the various units of measure for dimensions. (1), (2), (3)
Ø Locate and explain the purpose of information found in the title block. (1), (2), (3)
Ø Determine tolerance variances of a part, feature, and weld from the print dimension and specified tolerance. (1), (2), (3)
Ø Identify features of a circle and calculate the circumference and area. (1), (2), (3)
Ø Identify common types of angles and calculate supplementary and complementary angles. (1), (2), (3)
Ø Identify features of right triangles, calculate area, and use the Pythagorean Theorem. (1), (2), (3)
Ø Use angles, triangles, and circles to calculate missing dimensions. (1), (2), (3)
Ø Use fundamental geometry concepts to solve layout and fabrication problems. (1), (2), (3)
Ø Identify and apply various dimensioning systems used on the print. (1), (2), (3)
Ø Describe methods of showing fractional, decimal, and angular dimensions on a print. (1), (2), (3)
Ø Calculate missing dimensions. (1), (2), (3)
Ø Explain the purpose of linear and angular tolerance. (1), (2), (3)
Ø Describe the use of geometric tolerance. (1), (2), (3)
Ø Identify symbols used in geometric dimensioning and tolerancing to indicate the relationship between parts and features. (1), (2), (3)
Ø Explain applications of geometric dimensioning and tolerancing. (1), (2), (3)
Ø Identify the parts of a screw thread. (1), (2), (3)
Ø Explain why a threaded fastener would be used instead of welding. (1), (2), (3)
Ø Describe the components of a thread note. (1), (2), (3)
Ø Use a thread series table to select a tap drill for a specified thread form. (1), (2), (3)
Ø Explain the way threaded fasteners are represented on a point. (1), (2), (3)
Ø Identify different types of threaded fasteners. (1), (2), (3)
Ø Identify threaded fasteners that are commonly welded. (1), (2), (3)
Ø Distinguish among the various structural shapes in which commercial metals are manufactured. (1), (2), (3)
Ø Define common terms used to distinguish characteristics of metals and structural shapes. (1), (2), (3)
Ø Identify basic joint designs by name and shape. (1), (2), (3)
Ø Identify simple weld types by name and shape. (1), (2), (3)
Ø Identify and joint and groove style combinations by name and shape. (1), (2), (3)
Ø Describe and locate common parts of fillet, groove, and butt welds by name. (1), (2), (3)
Ø List the basic elements of a welding symbol. (1), (2), (3)
Ø Explain the meaning and use of each element of a welding symbol. (1), (2), (3)
Ø Interpret which side of the weld joint the weld is placed. (1), (2), (3)
Ø Identify and interpret non-preferred weld symbols. (1), (2), (3)
Ø Explain a welding symbol by developing a pattern to follow. (1), (2), (3)
Ø Name the parts of a fillet weld. (1), (2), (3)
Ø Determine weld size and weld length by interpreting the fillet welding symbol. (1), (2), (3)
Ø Read and interpret a fillet welding symbol used for intermittent and staggered intermittent welds. (1), (2), (3)
Ø Determine the weld face contour of a fillet weld. (1), (2), (3)
Ø Differentiate a groove weld from other types of welds. (1), (2), (3)
Ø Interpret dimensions for preparing groove welds, including the depth of preparation, groove angle, bevel angle, and root opening size. (1), (2), (3)
Ø Determine the preparation size and effective throat of groove welds. (1), (2), (3)
Ø Apply groove weld dimensioning standards. (1), (2), (3)
Ø Interpret surface finish and contour symbols. (1), (2), (3)
Ø Interpret melt-through, back, and backing weld symbols. (1), (2), (3)
Ø Explain uses for backing, joint spacers, and runoff weld tabs. (1), (2), (3)
Ø Describe the use of plug and slot welds. (1), (2), (3)
Ø Prepare the hole to the correct size and shape for a plug or slot weld. (1), (2), (3)
Ø Determine the correct fill and contour requirements for plug and slot welds. (1), (2), (3)
Ø Lay out the correct spacing for multiple plug or slot welds. (1), (2), (3)
Ø Explain the welding processes used to make spot, seam, and projection welds. (1), (2), (3)
Ø Identify the location, size, strength, spacing, and number of spot, seam, and projection welds as required by the symbol. (1), (2), (3)
Ø Explain the uses of surfacing welds. (1), (2), (3)
Ø Interpret a welding symbol for a surfacing weld. (1), (2), (3)
Ø Identify the use of flange welds to join sheet metal. (1), (2), (3)
Ø Identify methods of joining pipe or tube and fittings into an assembly. (1), (2), (3)
Ø Determine pipe size and explain a pipe schedule. (1), (2), (3)
Ø Determine how tube is measured. (1), (2), (3)
Ø Identify conventional symbols used on a piping drawing. (1), (2), (3)
Ø Describe the difference between brazing and braze welding. (1), (2), (3)
Ø Identify joint designs used for brazing and braze welding. (1), (2), (3)
Ø Describe the major metalworking processes. (1), (2), (3)
Ø Explain the purpose of welding codes. (1), (2), (3)
Ø Describe the destructive test methods used to qualify welders. (1), (2), (3)
Ø Identify basic nondestructive examination symbols for weldments. (1), (2), (3)
Ø Interpret elements of an examination symbol. (1), (2, (3)
Ø Describe the major nondestructive testing methods. (1), (2), (3)
(*) Numbers represent the learner outcome measurement method.
Measurement of Learner Outcomes
(1) Written Examination
(2) Practical Evaluation – Students will be asked to show competence by kinesthetic demonstration.
(3) Verbal – Students will demonstrate competence by presenting oral demonstrations in groups and individually.
Students will be tested for knowledge and skill attainment through written tests comprised of questions taken from handouts, reading assignments, homework and lectures. Quizzes may be unannounced, but tests will be announced at least one class period before they are given.
Method of Instruction
A combination of lecture, discussion, demonstrations and film/video presentations will be used in the classroom training.
Course Requirements
Ø Students will be required to hand in class assignments.
NO CELL PHONES, MP3 PLAYERS, CD PLAYERS, ETC. WILL BE ALLOWED IN THE CLASSROOM OR THE LAB EXCEPT AS PERMITTED BY THE INSTRUCTOR. Violation of this policy will result in the student being dismissed from class that day and it will count as an absence.
Attendance Policy: You are expected to attend all class meetings. Exceptions may be discussed with the instructor with suitable make-up activities agreed upon (before the absence). All course work is due on the assigned dates whether or not you are present. You will lose ten percent (10%) of your grade for everyday (not class period) that it is late. The instructor assumes no responsibility for making sure you receive any course material for which you were absent. This is your responsibility.
After being tardy three times this will count as one absence. If you are tardy more than one hour this will count as a half day absence, and if two and a half hours late or more this counts as an absence. AFTER TWO ABSENCES PER CLASS, OR 3 PER SEMESTER, YOU WILL BE DROPPED FROM THE CLASS.
Students with Disabilities: GBC supports providing equal access for students with disabilities. An advisor is available to discuss appropriate accommodations with students. Please contact the Director for Services to Students with Disabilities (Julie Byrnes) in Elko at 775.753.2271 at your earliest convenience to request timely and appropriate accommodations.
Grading Policy and Grading Scale
Grades will be weighted according to the following scale:
Class Participation, Assignments, Tests and Quizzes 40%
Mid-Term Test 30%
Final Test 30%
Grade Scale:
A 94% - 100% A- 90%-93%
B + 87% - 89% B 84%-86% B- 80%-83%
C+ 77% - 79% C 74%-76% C- 70%-73%
D + 67% - 69% D 64%-66% D- 60%-63%
F Below 60%
Drop Deadlines
If you do not formally withdraw by drop deadline, your instructor will automatically assign you a grade of “F.” The last day to drop the course is 10/03/2017.
Plagiarism
Plagiarism is presenting someone else’s words, ideas, or data as one’s own. When a student submits work that includes the words, ideas, or data of others, the source of that information must be acknowledged through complete, accurate and specific references, and if verbatim statements are included, through quotation marks as well. In academically honest writing or speaking, the student will acknowledge the source whenever another person’s actual words are quoted, whenever another person’s idea, opinion, or theory is used, even if it is completely paraphrased in the student’s own words, or whenever facts, statistics, or other illustrative materials are borrowed, unless the information is common knowledge.
Required Tools
12” ruler
Calculator
3-ring Binder
#2 pencils
Black ink pens