Particle Filter Box Model FK-FF
Specification texts
Particle filter box with safely sealing pressure device and sealing device for installation of filter cells with fluid frame. Filter box is made of electrolytically galvanised sheet steel painted inside and outside to RAL 9010 (white), with horizontal, round, connection pipe. With integrated differential pressure and aerosol monitoring device with measuring spigot inside the box, for hose connection with an inner diameter of 10 mm. Air diffuser fastened with magnetic fastening.
Product: SCHAKO type FKF-H-...
-with horizontal, round connection spigot and manually adjustable sealing shut-off damper.
Leakage at closed shut-off damper according to DIN EN 1751, class 4, at a duct pressure of up to 1000 Pa.
Product: SCHAKO type FKF-H-...-M001-...
-with horizontal, round connection spigot and electrically (OPEN/CLOSED actuator) adjustable sealing shut-off damper (with and without spring return).
Leakage at closed shut-off damper according to DIN EN 1751, class 4, at a duct pressure of up to 1000 Pa.
Product: SCHAKO type FKF-H-...-Exxx-...
-with vertical, round connection spigot
Product: SCHAKO type FKF-V-...
-with vertical, round connection spigot and manually adjustable shut-off damper.
Leakage at closed damper blade according to DIN EN 1751, class 4, at a duct pressure of up to 1000 Pa.
Product: SCHAKO type FKF-V-...-M001
-with horizontal, rectangular connection pipe with connection flange
Product: SCHAKO type FKF-Q-...
-Filter box made of (at an extra charge):
(suitable for installation in visible areas)
-Stainless steel 1.4301 (V2A) painted in the colour sand silver
-with air diffuser, consisting of:
-Sheet steel painted to RAL 9010 (white)
-Aluminium natural colour anodised E6/EV1 (magnetic fastening not possible)
-Stainless steel 1.4301 (V2A, only FDQJ) painted in the colour sand silver (only VM possible)
-for supply air/return air:
-FDQJ (-41)
-FPIL (-42)
-FDAV (-43)
Accessories (at an extra charge):
-Differential pressure device / aerosol monitoring device additionally with 2 measuring spigots on the box outside for a hose with an inner diameter of 4 mm (-D2)
-Differential pressure device / aerosol monitoring device additionally with 2 measuring spigots on the box outside for a hose with an inner diameter of 4 mm and an aerosol feeding device in the spigot from the box inside (-D3)
-Differential pressure device / aerosol monitoring device additionally with an aerosol feeding device in the spigot from the box inside (-D4)
-Differential pressure device / aerosol monitoring device additionally with an aerosol feeding device in the spigot from the outside (-D5)
-Differential pressure transducer (-U1), only possible for -D2 and -D3, supplied loose or, as an option, mounted to the box outside
-Rubber lip seal (-GD1) made of special rubber (not for FKU-Q)
-Particle filter with fluid seal in filter housing, filter frame made of aluminium with double-sided handle cover, oil thread test checked according to DIN EN 1822, temperature-resistant up to 80°C, filter wrapped in film
-UXA: filter class H13 (>99.95%)
-UXA: filter class H14 (> 99.995%)
-Scan test checked according to DIN EN 1822 (at an extra charge)
-Mounting lever for replacing the filter, made of sheet steel painted to RAL 9010 (white)
-Magnetic fastening (-MB) (standard, for FDQJ made of sheet steel, not possible for aluminium and stainless steel model)
-Concealed mounting (-VM) (standard for air diffusers made of aluminium and stainless steel and for FPIL and FDAV)
-Antibacterial coating (-AB1)