Adding the Ricoh Aficio MP C4502 printer – Windows 7
1. Make sure you are connected through the ‘restricted.utexas.edu’ wireless network.
2. Go to the Ricoh Website: http://support.ricoh.com/bb/html/dr_ut_e/ra/model/mpc450/mpc450en.htm
3. Select your Operating System (most likely either Windows 7 64-bit or 32-bit)
4. Click the download link for PCL 6 Driver
5. When the download is complete, run the file
6. Click next
7. Accept the agreement and click next
8. Click browse and select the Desktop
9. Click next
10. Click on Install
11. The window will close.
12. Open the start menu
13. Click Devices and Printers
14. Click Add Printer
15. Select Add a local printer
16. Select create a new port and change the type of port to Standard TCP/IP port, then click next
17. In Hostname or IP address enter: 172.16.189.12
18. Change Port name to: Ricoh Aficio MP C4502
19. Uncheck “Query the printer and automatically select the driver to use”
20. Click next
21. Select “Have disk”
22. Clck browse
23. Find the folder that was created on your desktop and go to the folder disk1.
24. Select OEMSETUP and clck open
25. Click OK
26. Click Next
27. Change the printer name to “Ricoh MP C4502”
28. Click Next
29. Select “Do not share this printer”
30. Click next
31. Click Finish