Test methods for reinforcing fibres
ISO 1887: Glass fibre – size content
ISO 1888: Glass fibre – density
ISO 2078: Glass fibre - designation yarns
ISO 3341: Glass fibre – breaking force – yarn
ISO 10119: Carbon fibre – density
ISO 10548: Carbon fibre – size content
ISO 10618: Carbon fibre – breaking force – yarn
ISO 11566: Carbon fibre – breaking force – single filament
ISO 11567: Carbon fibre – diameter
ISO 13002: Carbon fibre – Designation system for filament yarns.
ISO 1889: all fibres – linear density
ISO 1890 all fibres – twist
BS 4045:1966. Specification for epoxide resin pre-impregnated glass fibre fabrics.
ISO 9291. Textile glass reinforced plastics – rovings – preparation of unidirectional plats by winding.
BS ISO 10371:1993. Fibre reinforced plastics. Braided tapes for composite materials reinforcement. Basis for a specification.
BS EN 13003:1999. Para-aramid fibre filament yarns.
ISO/DIS 15039. Textile glass rovings – determination of solubility of sizing.
ISO/DIS 15100. Plastics – reinforcement fibres – chopped strands – determination of bulk density.
Moulding compound / pre-impregnates – test methods and specifications
PrEN yyyyy: Reinforced plastics composites – specifications for thermoset moulding compounds (SMC, BMC, DMC)
PrEN yyyyy: Determination of flowability
PrEN 2833: Aerospace: reinforced Plastics – glass fibre pre-impregnates
ISO 9782. Plastics; reinforced moulding compounds and prepregs; determination of apparent volatile matter content.
ISO 10352. Fibre reinforced plastics – moulding compounds and prepregs – determination of mass per unit area.
ISO 11667. Fibre reinforced plastics – moulding compounds and prepregs – determination of resin, reinforced fibre and mineral filler content – dissolution methods.
ISO 12115. Fibre reinforced plastics – thermosetting moulding compounds and prepregs – determination of flowability, maturation and shelf life.
ISO 12144 – Fibre reinforced plastics – thermosetting moulding compounds and prepregs – determination of cure characteristics
BS EN 12575:1998. Plastics. Thermosetting moulding compounds. Determination of the degree of fibre wet out in SMC.
PrEN 13677: Reinforced Plastics Composites – specifications for thermoplastic moulding compounds (GMT)
ISO 15034: Prepregs – resin flow
ISO 15040: Prepregs – cure time
Resin systems
BS 3532:1990. Specification for unsaturated polyester resin systems for low pressure fibre reinforced plastics.
Fibre reinforced polymers
BS 6564-3:1990. Polytetrafluoroethylene (PTFE) materials and products. Specification for E-glass fibre filled PTFE.
Coupon tests
BS EN ISO 75-3:1996. Plastics. Determination of temperature of deflection under load. High-strength thermosetting laminates and long-fibre-reinforced plastics
EN ISO 527 – part 1: Plastics – determination of tensile properties – general principles
EN ISO 527 – Part 4: Determination of tensile properties – test conditions for isotropic and orthotropic fibre-reinforced plastic composites
EN ISO 527-5: Plastics. Determination of tensile properties. Test conditions for unidirectional fibre-reinforced plastic composites
ISO 1268: Fibre reinforced plastics – test plate manufacturing methods
ISO 1172. Textile glass reinforced plastics; determination of loss on ignition
BS 2782-10: Method 1008A:1996 / ISO 3597-1:1993. Methods of testing plastics. Glass reinforced plastics. General considerations and preparation of rods for determination of mechanical properties on rods made from roving-reinforced resins.
ISO 2818: Plastics – preparation of specimens by machining
ISO 3597. Textile glass reinforced plastics; determination of mechanical properties on rods made of roving reinforced resin (parts 1-4)
ISO 4899 textile glass reinforced thermosetting plastics; properties and test methods.
ISO 10350-2: plastics – acquisition and presentation of comparable single-point data – Part 2: long fibre reinforced plastics
ISO/FDIS 13003: Fibre reinforced plastic composites – determination of fatigue properties under cyclic loading
EN ISO 14125: Fibre-reinforced plastics composites – determination of flexural properties
EN ISO 14126: Fibre reinforced plastic composites – determination of the in-plane compression strength
ISO/DIS 14127. Composites – determination of resin, fibre and void content of composites reinforced with carbon fibre
EN ISO 14129: Fibre reinforced plastic composites – determination of the in-plane shear stress/shear strain, including the in-plane shear modulus and strength by the ±45° tension test method
EN ISO 14130: Fibre reinforced plastic composites – determination of apparent interlaminar shear strength by short-beam method
ISO 15024: standard test method for mode I interlaminar fracture toughness Gic of unidirectional fibre reinforced polymer matrix composites
ISO 15310: Fibre reinforced plastic composites – determination of in-plane shear modulus by plate twist
Physical-chemical test methods
ISO 6721: Plastics – Determination of Dynamic mechanical properties
ISO 11357: Plastics - Differential scanning calorimetry
Product Standards
BS EN 1013-2:1999. Light transmitting profiled plastics sheeting for single skin roofing. Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP).
BS 4154:1985. Corrugated plastics translucent sheets from thermo-setting polyester resin (glass fibre reinforced).
BS 5480:1990. Specification for glass fibre reinforced plastics (GRP) pipes and fittings for water supply or sewerage.
ISO 7370. Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings; nominal diameters, specified diameters and standard lengths.
ISO/FDIS 7432 Glass reinforced thermosetting plastics (GRP) pipes and fittings-test methods to prove the design of locked socket and spigot joints
BS 7491. Glass fibre reinforced plastics cisterns for cold water storage
ISO/DIS 7509 Plastics piping systems – glass reinforced thermosetting plastics (GRP) pipes – determination of time to failure under sustained internal pressure
ISO 7510. Plastics piping systems- glass reinforced plastics (GRP) components
ISO 7511. Plastics piping systems – glass reinforced thermosetting plastics (GRP) pipes and fittings – test methods to prove the leaktightness of the wall under short-term internal pressure.
ISO 7684. Plastics piping systems – glass reinforced thermosetting plastics (GRP) pipes – determination of the creep factor under dry conditions.
ISO 7685. Plastics piping systems - glass reinforced thermosetting plastics (GRP) pipes – determination of initial specific ring stiffness.
ISO/DIS 8483 glass reinforced thermosetting plastics (GRP) pipes and fittings – test methods to prove the design of bolted flange joints.
ISO/DIS 8513. Plastics piping systems - glass reinforced thermosetting plastics (GRP) pipes – determination of initial longitudinal tensile properties.
ISO 8521 Plastics piping systems - glass reinforced thermosetting plastics (GRP) pipes – determination of the apparent initial circumferential tensile strength.
ISO/DIS 8533. glass reinforced thermosetting plastics (GRP) pipes and fittings – test methods to prove the design of cemented or wrapped joints.
ISO/DIS 8639 Glass reinforced thermosetting plastics (GRP) – test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints.
BS ISO 9291:1996. Textile-glass-reinforced plastics. Rovings. Preparation of unidirectional plates by winding
ISO 10466. Plastics piping systems - glass reinforced thermosetting plastics (GRP) pipes – test method to prove the resistance to initial ring deflection.
ISO/DIS 10467. Plastics piping systems for pressure and non-pressure sewerage – glass reinforced thermosetting plastics (GRP) based on unsaturated polyester (UP) resin.
ISO/DIS 10468 plastics piping systems - glass reinforced thermosetting plastics (GRP) pipes – determination of the long-term specific creep stiffness under wet conditions and calculation of the wet creep factor.
ISO/DIS 10471. Plastics piping systems - glass reinforced thermosetting plastics (GRP) pipes – determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions.
ISO/DIS 10639. Plastics piping systems for water supply with or without pressure – glass reinforced plastics (GRP) based on unsaturated polyester (UP) resin.
ISO 10928. Plastics piping systems - glass reinforced thermosetting plastics (GRP) pipes and fittings – methods for regression analysis and their use.
ISO 10952. Plastics piping systems - glass reinforced thermosetting plastics (GRP) pipes and fittings – determination of the resistance to chemical attack from the inside of a section in a deflected condition
PrEN 13706: Fibre reinforced plastics – specification for pultruded profiles
ISO/DIS 14828. Plastics piping systems - glass reinforced thermosetting plastics (GRP) pipes – determination of the long-term specific ring relaxation stiffness under wet conditioned and calculation of the wet relaxation factor