Video programmes by Department of Electronic Media, NITTTR, Bhopal 1

Significant features of our instructional resources (IRs)

Contributions of eminent personnel from field of education, industry and media are received during design and development of IRs.

IRs are validated by eminent persons from field of education technology, Industry, Media and target group audience.

Each video programme is available on a high quality, half inch, VHS videocassettes as well as on CDs.

Most of the Video Programmes had been repeatedly telecast on UGC's countrywide Classroom Project and Gyandarshan channel. However, our preferred mode of dissemination is through cassettes & CDs.

Our Video Programmes have got a heavy demand from vocational and technical institutions such as Polytechnics, ITI's, CTI's IIT's, Engineering Colleges, Industries involved under HRD activities, Common wealth Organisations etc. however, many developing countries have expressed desired to import these programmes for their use.

Our instructional Resources (IRs) have been given a certification of proprietary item by National Project Implementation Unit, New Delhi vide their letter No. 7845 dated 15.03 96 for initiating the direct purchase of our IRs by the polytechnics. (Copy given below)

Certificate

NPIU

Dr. R.N. Mathur By speed post

Deputy project coordinator (R)

No. A/Proprietary /96/7845 15th March, 1996

Dear Sir/ Madam,

Sub: Proprietary certification to LR Material developed by TTTIs

This is to certify that all the LR material produced by TTTIs in the four regions are proprietary items and can be procured by the project states by direct contacting i.e. by placing orders on respective TTTIs or their authorised agent. The project states are required to obtain the proprietary certification from the TTTI/authorised agent for the material being purchased. It is therefore requested that the project states may take immediate action on procurement of the material under the project.

With kind regards,

Yours sincerely,

Sd/-

(R.N. Mathur)

To

All SPIU Heads

Copy to:

Prof. R.K. Mani

Principal, Technical Teachers' Training Institute (WR)

Shamla Hills, Bhopal-462 002


MECHANICAL ENGINEERING

Code No. / Titles & Contents / Duration/ language/ Price
M1.00 /

A series on non destructive TESTING

M1.01 / Part- 1 / Introduction to non-destructive testing. / 15 Minutes/ English
Rs.1000.00
Contents / Dye Penetrant Inspection, Basic Principles, Test Procedures, Test Set-up and Precautions.
M1.02 / Part- 2 / MAGNETIC INSPECTION / 15 Minutes/ English Rs.1000.00
Contents / Basic Principles, Test Procedures, Test Set-up, Precautions.
M1.03 / Part- 3 / EDDY Current TEST / 18 Minutes/ English
Rs.1000.00
Contents / Basic Principles, Test Procedures, Test set-up various examples, Precautions.
M1.04 / Part- 4 / Radiographic Test / 17 Minutes/ English
Rs.1000.00
Contents / Test set-up and its explanation, working procedure etc.
M1.05 / Part- 5 / Ultrasonic Test / 17 Minutes/ English Rs.1000.00
Contents / Test set-up and its explanation, working procedure etc.
M2.00 / A SERIES ON NC CNC MACHINE TOOLS
M2.01 / Part- 1 / NC-CNC machine tools (Development of Machine Tools) / 26 Minutes/ English
Rs.1000.00
Contents / Historical Developments in machine tools. Motivation to the development with advantages and limitations.
M2.02 / Part- 2 / NC-CNC machine tools (Structure of NC Machine Tools) / 20 Minutes/ English
Rs.1000.00
Contents / Demonstration of Structure of various machine tools
M2.03 / Part- 3 / NC-CNC machine tools (Machine Controls) / 17 Minutes/ English
Rs.1000.00
Contents / Controls, Hydraulic and electro-mechanical servomechanisms for control of machine tool slide.
M2.04 / Part- 4 / NC-CNC Machine tools (Machine Controls) / 14 Minutes/ English Rs.1000.00
Contents / Automatic Tools Changing and Pallet Indexing.
M2.05 / Part- 5 / NC-CNC MACHINE TOOLS(Part Programming On Machining) / 39 Minutes/ English Rs.1000.00
Contents / How to write a programme for machining.
M2.06 / Part- 6 / NC-CNC Machine tools (Writing a Programme and Demonstration) / 21 Minutes/ English
Rs.1000.00
Contents / How to write a programme for machining
M2.07 / Part- 7 / NC-CNC Machine tools (Socio-economic aspects) / 30 Minutes/ English
Rs.1000.00
Contents / Socio-economic aspects of introducing NC-CNC techniques in industries. Views of eminent professionals.
M3.00 / A SERIES ON KINEMATIC CHAIN
M3.01 / Part- 1 / Kinematic Chain (Four Bar Mechanism) / 20 Minutes/ English
Rs.1000.00
Content / Four Bar Kinematical Chain and its application, concept formation in question answer technique.
M3.02 / Part- 2Content / Kinematic Chain (Pantograph Mechanism)
Concept of pantograph mechanism and its application / 20 Minutes/ English Rs. 1000.00
M9.00 / Video Series on Welding
M9.01 / Part- 1 INTRODUCTION TO WELDING / 39 Minutes/ English
Rs.1000.00
Contents / Definition of welding, classification and principles of working of different welding processes and their applications.
M9.02 / Part- 2 GAS welding and thermit WELDING / 28 Minutes/ English
Rs.1000.00
Contents / Principle of gas and Thermit welding, equipment, chemical constituents and applications of gas welding and Thermit welding.
M9.03 / Part- 3 ARC Physics & power SOURCES / 50 Minutes/ English
Rs.1000.00
Contents / Arc Physics, welding arc definition, characteristics, methods of generating arc, are welding phenomena, ARC blow-causes and remedies, Power Sources: - need and importance of power sources, classification of power sources, principle of different welding processes.
M9.04 / Part- 4 Manual Metal ARC WELDING / 24 Minutes/ English
Rs.1000.00
Contents / Definition of MMAW, its advantages and limitations, power supplies and techniques of MMAW. Different kinds of electrodes and their selection.
M9.05 / Part- 5 Submerged ARC welding & Electro Slag
WELDING / 47 Minutes/ English
Rs.1000.00
Contents / Principle of working, process variations, equipment, consumables, advantages limitations, and applications of SAW and ESW.
M9.06 / Part- 6 TIG & Plasma WELDING / 50 Minutes/ English
Rs.1000.00
Contents / Principle of working, equipment consumables, process, applications, advantages and limitations of TIG and Plasma Welding, Pulse TIG Welding process, Limitations and advantages.
M9.07 / Part- 7A & Part- 7BRESISTANCE WELDING / 80 Minutes/ English
Rs.1000.00
Contents / Principle of working, classification, processes, equipment, applications advantages and limitations. Testing of resistance welded jobs.
M9.08 / Part- 8 Electron Beam Welding and laser welding / 50 Minutes/ English
Rs.1000.00
Contents / Principle of working. Equipment, process, advantages limitations, applications and safety requirements. Comparison of EBW and laser Welding.
M9.09 / Part- 9 BRAZING AND SOLDERING / 51 Minutes
English
Rs.1000.00
Contents / Principle of working, classification, processes, equipment, applications, advantages and limitations.
M11.00 / OTHER ALLIED LEARNING RESOURCES ON WELDING
M11.02 / Manufacturing stick welding ELECTRODES / 14 Minutes/ English Rs.1000.00
Contents / This video programme presents the manufacturing process of stick welding electrodes
M13.00 /
A Video Series on Casting Defects
M13.01 / Part- 1 INTRODUCTION TO CASTING DEFECTS / 27 Minutes/ English
Rs.1000.00
Contents / System approach to control the defects. Documentation and display of the process, Process parameters, Five case studies and outcomes, Suggested reading material references, Introduction to the series.
M13.02 / Part- 2 BLOW HOLES / 18 Minutes/ English
Rs.1000.00
Contents / Blow Holes, Location of blowholes, Characteristics features of blowholes, Genesis of the defect, and Remedial measures.
M13.03 / Part- 3 SHRINKAGE / 20 Minutes/ English
Rs.1000.00
Contents / Characteristics features of appearance of the defect, Classification into open, internal, corner etc. Genesis, Causes leading to shrinkage and Remedial measures.
M13.04 / Part- 4 INCLUSIONS / 25 Minutes/ English
Rs.1000.00
Contents / Identification of inclusions, Classification into sand and dirt, slag and slag like matter, Causes e.g. Design, Patterns, Pattern equipment, moulding boxes, gating and running, moulding sand; core practice, moulding practice, Metal composition, Melting Practice, Pouring Practice, etc. & Remedies.
M13.05 / Part- 5 SCAB / 17 Minutes/ English
Rs.1000.00
Contents / Appearance of defect, Classification into expansion scab and erosion scab, Causes leading to scabs, Remedial Measures, The concept of scab is concretised through animations for ease of understanding.
M13.06 / Part- 6 DISCONTINUITIES / 18 Minutes/ English
Rs.1000.00
Contents / The defect- cold lap, cold shut, Misrun, inadequate fusion of chapters etc., Causes of the defect and Remedial Measures.
M13.07 / Part- 7 Pinhole POROSITY / 20 Minutes/ English
Rs.1000.00
Contents / Behaviour of Aluminium Melt, Identification of Pinhole Porosity, Causes of the defect, Preventive and corrective measures.
M14.00 / A Video Series on Engineering Graphics
M14.01 / A video lecture series on Engineering Drawing – Basic concept of Projections
Mr. K. Srinivas Rao / 50 Minutes
English

Electrical Engineering

Code No. / Titles & Contents / Duration/ language Price
E3.00 / ALUMINUM ELECTROLYTIC CAPACITORS / 17 Minutes English
Rs. 1000.00
Contents / Process of Manufacturing aluminium electrolytic capacitors is shown in detail, fast events normally not seen by naked eyes are shown in slow motion, Process of slitting, Testing are shown as performed in industry (Elcaps, Bhopal)
E5.02 / Permit issued / 11 Minutes English
Rs. 1000.00
Contents / The importance of issuing proper permits and of following safe practices for switching the feeders of electrical supply from supply authority has been demonstrated. Procedure for issuing permit has been discussed in detail in actual field settings.
E5.03 / Safety Zone / 11 Minutes English
Rs.1000.00
Contents / Demonstrates the importance of creating a safety zone on power distribution lines before starting any activity on line for maintenance. The procedure of creating safety zone has been demonstrated in detail on the field.

Civil Engineering

Code No. / Titles & Contents / Duration/ language/ Price
C1.00 / SOIL ENGINEERING LABORATORY EXPERIMENTS
C1.01 / "DENSITY OF SOIL IN PLACE BY SAND REPLACEMENT METHOD" / 25 Minutes English
Rs. 1000.00
Contents: / Procedure of Conducting the test using a small sand-pouring cylinder in different steps.
C1.02 / "SIEVE ANALYSIS" / 19 Minutes English
Rs. 1000.00
Contents: / Procedure of Sieve analysis by dry method for sieving coarse grained soil, Quartering method of preparing sample, etc.
C1.03 / "CBR (California Bearing Ratio) test" / 25 Minutes English
Rs. 1000.00
Contents / Procedure of conducting test on un-soaked specimen prepared at OMC and MDD from distributed soil sample by dynamic compaction using light compaction rammer.
C1.04 / "Liquid Limit Test" / 19 Minutes English
Rs. 1000.00
Contents / Method of determining liquid using casagrande apparatus. Programme is in three parts -Adjustment of Apparatus, Sample preparation, Conducting the test.
C1.05 / Part- 1 Triaxial Test (Specimen Preparation)" / 19 Minutes English
Rs. 1000.00
Contents / Description of apparatus required for conducting a Triaxial compression test. Demonstration of method of preparation of the specimen from soil sample.
C1.06 / Part- 2 TRIAXIAL TEST (Specimen Testing)” / 20 Minutes English
Rs. 1000.00
Contents / Procedure of applying rubber membrane on the specimen, mounting the specimen, application f lateral pressure, plotting Mohr Circles etc.
C1.07 / "Plastic limit test” / 15 Minutes English
Rs. 1000.00
Contents / Shows the method of determining plastic limit by rolling a soil mass to form a thread of Standard Diameter. Sample preparation, conducting the test.
C1.08 / "Compaction test" / 28 Minutes English
Rs. 1000.00
Contents / Demonstration of light compaction test on a clayey soil sample shows the specific differences between a light compaction test and a heavy compaction test.
C1.09 / "WATER CONTENT DETERMINATION" / 18 Minutes English
Rs. 1000.00
Contents / Determination of water content of soil sample by oven drying method.
C1.10 / "Shrinkage limit" / 30 Minutes English
Rs. 1000.00
Contents / Programme shows preparation of soil sample for test, preparation of soil paste, volume of wet soil pat, filling shrinkage dish, mass of dry soil pat volume of dry soil pat etc.
C1.11 / "Direct Shear Test" / 28 Minutes English
Rs. 1000.00
Contents / Concept of direct shear, Procedure of conducting direct shear test on a Sandy soil sample using standard hand operated equipment.
C1.12 / "Specific Gravity Test" / 24 Minutes English
Rs. 1000.00
Contents / Concept of specific gravity as applied to soil. Determination of specific gravity of fine-grained soil using specific gravity bottle.
C1.13 / "Unconfined compression test" / 26 Minutes English
Rs. 1000.00
Contents / Demonstration of simplest test used for clayey soils
C1.14 / Part- 1 "Permeability test" / 27Minutes English
Rs. 1000.00
Contents / Shows how the specimen are prepared and saturated for permeability tests.
C1.15 / Part- 2 "PERMEABILITY TEST" / 24 Minutes English
Rs. 1000.00
Contents / It demonstrates the method of finding at the value of co-efficient of permeability using Constant Head Method.
C1.16 / "Lab Vane shear test" / 21 Minutes English
Rs. 1000.00
Contents / Programme demonstrates how to determine shear strength of soil in Laboratory using Vane Shear apparatus.
C1.17 / "Core Cutter Method" Contents Programme shows the Procedure of determining field density of
Cohesive soil using a core cutter method. / 19 Minutes English
Rs. 1000.00
CONSTRUCTION
C4.01 / "PILE FOUNDATION" / 30 Minutes English
Rs. 1000.00
Contents- / Criteria for locating residential buildings in clay soil. Pressure distribution, Problems of differential settlement. Purpose of pile foundation, Types and shapes of piles. Under reamed pile foundation, Under reamed pile foundation, Under reamed pile foundation, Group pile Foundation, Safe load. Along with this cassette learning package is also available.
C5.01 / CONSTRUCTION OF BOX TYPE BRIDGE- A DISCUSSION WITH EXPERT / 30 minutes
English
Rs.1000.00
Contents- / Need of concrete bridges, current trends & techniques, pre-stressed cable process, quality control aspects, bridge management system, advantages, Under water foundations.
C5.02 / Part- 1 BRIDGE ON LAKE / 30 minutes
English
Rs.1000.00
Contents- / Important stages of construction of super structure of bridge for Pre-stressed Concrete box type bridge- Centring & shuttering of sofit, casting of end block, reinforcement for sofit diaphragm wall & beams, laying of pre-stressed cable, casting of sofit, diaphragm wall & beams, casting of deck slab& cantilever slab.
C5.03 / Part- 2 BRIDGE ON LAKE / English
30 minutes
Rs.1000.00
Contents / Pre-stressing of cable, grouting of cable, contraction of gap slab, casting of various service elements.
C5.04 / CONSTRUCTION OF GEO-DESIC DOME / Hindi
20 minutes
Rs.1000.00
Contents / Site selection, dome kit structure, construction process, and applications.

ELECTRONICS ENGINEERING

Code No. / Titles & Contents / Duration/ language/ Price
EX1.00 / A SERIES ON VCR MAINTENANCE
EX1.01 / Part- 1 "HEAD CLEANING" / 15 Minutes English Rs.1000.00
Contents / Symptoms of dirty video head, samples of good and bad quality tapes. Fungus deposition on tapes, Placement of Sensors, Techniques of head cleaning dry and wet methods.
EX1.02 / Part- 2 "HEAD REPLACEMENT" / 23 Minutes English Rs.1000.00
Contents / Symptoms leading to head replacement, Procedure of head replacement demonstration.
EX1.03 / Part- 3 "TAPE TRANSPORT PATH" / 21 MinutesEnglish Rs.1000.00
Contents / Demonstration of all elements in Tape Transport path to include functions of each component in the path, Guide rollers, Head, fixed anchors, tension arms etc.
EX1.04 / Part- 4 "HEAD PRE-AMPLIFIER AND HEAD SWITCHING" / 27 Minutes English Rs.1000.00
Contents / Principles, demonstration and expert observations on Head-pre-amplifier and Head switching, Rotary transformer, video head clip, FM output on scope showing head pre amp, location of head pre-amp.
EX1.05 / Part- 5 "BLOCK DIAGRAM OF VCR" / 30 Minutes English Rs.1000.00
Content / Explanation of Block diagram of VCR.
EX1.06 / Part- 6 "LUMINANCE PROCESSING IN VCR" / 30 Minutes English
Rs.1000.00
Contents / Luminance processing in record and playback mode with symptoms of flaws.
EX1.07 / Part- 7 "CHROMINANCE PROCESSING IN RECORD & PLAYBACK" / 32 Minutes English Rs.1000.00
Contents / Explanation of block diagram, processing of chrominance signal in record and playback mode, symptoms of defects etc.
EX1.08 / Part- 8 "SERVO ELECTRONICS IN VCR BACK MODE" / 47 Minutes English Rs.1000.00
Contents / Drum and capstan servo in record and play back mode, Block diagram, working of drum and capstan servo, symptoms of defects.
EX2.00 /

VIDEO SERIES ON MICROPROCESSOR

EX2.01 / Part- 1 Interrupt and dma / 24 Minutes English Rs.1000.00
Contents / The programme describes the concept of interrupt driven I/O, specially, Polled, Vectored, And software activated. (The role of interrupt controller also has been explained with respect to 825a IC and 8085 CPU)
EX2.02 / Part- 2 INTERRUPT AND DMA / 28 Minutes English Rs.1000.00
Contents / This programme explains operation of 8259 programmable interrupt Controller. Detailed description using charts, Master Slave Operation of 8259. The concept of DMA, its hardware and software requirement, and DMA controller is explained.
EX2.03 / Part- 1 System Design, Configuration and INTEGRATION / 32Minutes English Rs.1000.00
Contents / This programme explains the use of 8085 CPU in a system for application function the design life cycle and design configuration have been explained using detailed charts and some industry shots.
EX2.04 / Part 2 SYSTEM DESIGN, CONFIGURATION AND INTEGRATION / 32Minutes English Rs.1000.00
Contents / A case study for designing of interfacing a 8085 CPU with a stepper motor has been presented. The hardware & I/O requirements programme structure for interfacing application has been discussed.

RENEVABLE energy

Video Series on Wind energy

Code No. / Titles & Contents / Duration/ language/ Price
RE.1.1.0 / WIND POWER SCENARIO IN INDIA- A PERSPECTIVE. / 26.45 Minutes English
Rs.600.00
Contents / This video programme presents the wind power scenario in India and views of some of the wind turbine manufacturers regarding the prospects in the wind sector. Issues related to wind mapping, human resource requirements are also discussed.
RE.1.2.0 / TYPES OF LARGE WIND TURBINE GENERATORS IN INDIA / 17.53 Minutes English
Rs.1000.00
Contents / Different types of wind turbines manufactured by various manufacturers have been installed at various places in India. This video programme presents an overview of some of the types of wind turbines with their specifications and peculiar characteristics.
RE.1.3.0 / VIEDO SERIES ON LARGE WIND TURBINE GENERATOR
RE.1.3.1 / Part 1- COMPONENTS OF GEARED WIND TURBINE / 17.15 Minutes English
Rs.1000.00
Contents / This video programme explains about various components of 500 KW geared wind turbine. Main components of the wind turbine such as nacelle, nacelle bed plate, main shaft with bearing, gear box, electrical generator, gearbox-generator coupling, pitching mechanism, hydraulic system, yaw system, various sensors, electronic control panels, lattice type as well as tubular tower, transformer, switchyard etc. have been included in this programme.
RE.1.3.2 / Part 2- HOW A LARGE WTG WORKS (under production) / 20 Minutes English
Rs.1000.00
Contents / This programme presents the working principle of wind turbine. Aspects related to rotor design, comparison with aeroplane wing design, power generation and concepts related to wind turbine working etc. will be covered.
RE.1.3.3 / Part 3- ASSEMBLY OF LARGE WTG NACELLE (under production) / 25 Minutes English
Rs.1000.00
Content / This video programme presents step-by-step procedure of assembling various components of a typical 500 KW geared wind turbine, at nacelle assembly unit. Process of nacelle assembly has been shown in detail in this programme.
RE.1.3.4 / Part 4- INSTALLATION OF LARGE WIND TURBINE GENERATOR / 21.20 Minutes English
Rs.1000.00
Contents / This programme covers the complete process of installation of lattice tower based 500 KW geared large wind turbine at site. Steps like tower foundation, tower installation, nacelle lifting and installation, rotor blade assembly, lifting and installation of assembled rotor on nacelle at tower top.
RE.1.3.5 / Part 5- POWER GENERATION BY LARGE WIND TURBINE
GENERATOR (under production) / 15 Minutes English
Rs.1000.00
Contents / This programme includes the substation related to wind turbine generators and how the power is produced and fed to the electrical grid.

SCIENCE, PHARMACY & ALLIED AREAS

Code No. / Titles & Contents. / Duration/ language
SC 01 / Determination of Flash and Fire Point of Lubricating Oils using Cleaveland’s open cup apparatus.
Dr. Sulbha Amlathe / 22.24 Minutes
English
Rs.600.00
SC 02 / Application of Electro Analytical Techniques to Pharmaceutical Analysis
Dr. Rajeev Jain / 40. 17 Minutes
English
Rs.600.00
SC 03 / QSAR – A tool in drug design
Dr. Kunal Roy / 38.44 Minutes
English
Rs.600.00
SC 04 / Symmetry in the world of Molecule
Dr. P.V. Khadikar / 27.36 Minute
English
Rs.600.00
SC 05 / Character Table – Horoscope of the Molecule
Dr. P.V. Khadikar / 32 Minutes
English
Rs.600.00
SC 06 / Applications of Symmetry and Group Theory
Dr. P.V. Khadikar / 46 Minute
English
Rs.600.00

DISTANCE EDUCATION