/ Civil Aviation Department
Male’, Republic of Maldives / CAD Form ATC-02
Delivery Flight Authorisation – Application and Approval
1. APPLICATION
1. 1Applicant
Name
Address
Contact Person
Telephone
1.2 Aircraft Details
Manufacturer / Year of Construction
Type and Series / S/N
Nationality / Registration Marks
1.3 Airworthiness Information
Has CAD issued a Type Acceptance Certificate (TAC) to the type of aircraft described in section 1.2? / YES NO
The aircraft, in its current configuration, complies with the TAC approved by CAD? / YES NO
Airworthiness certification for the delivery flight will be covered by a: / Permit to Fly / Certificate of Airworthiness*
Permit to Fly / Certificate of Airworthiness* reference
Does the aircraft hold a statement by the national aviation authority of the State where the aircraft is, or was, registered, reflecting the airworthiness state of the aircraft as per MCAR-21.174? / YES NO
Does the aircraft hold complete historical records to establish the production, modification, and maintenance standard of the aircraft? / YES NO
1.4 Flight Details
Operating agency
Schedule; route(s), date(s), timing(s) of operations
Note: An unsatisfactory answer to any of the questions in Section 1.3 will mean an authorisation may not be made.
* Delete as appropriate
I/We hereby declare that the foregoing particulars and answers are true in every respect, and I/We apply for the delivery flight authorization of the above aircraft.
Date: Signature(s) …………………………………………………………
Name ………………………………………………………………..
Position ……………………………………………………………..
2. APPROVAL (CAD USE ONLY)2.1 Review – Airworthiness Section
Fulfills the requirements of section 1.3? / YES NO
Aircraft meets the import requirements? / YES NO
Inspector
Signature
Date
2.2 Review – Air Transport Section
Approval number
Conditions and Limitations
1. Operational information pertinent to control aircraft and systems shall be aboard the aircraft and readily available to the crew.
2. The flight shall be conducted in accordance with current approved flight manual, approved manual material, appropriate markings and placard or any combination thereof.
3. Flight crew shall hold current licences and appropriate ratings for this aircraft.
4. The carriage of cargo or persons other than those necessary for the purpose of the flight is prohibited. Spares and equipments meant for the servicing of the aircraft may be carried on board the aircraft.
5. The aircraft shall be inspected and certified by an appropriately licenced engineer, approved person or organisation before commencement of each flight enroute.
6. This authorisation does not permit flights over foreign countries. It shall be the responsibility of the aircraft owner or operator to secure permission from the appropriate authorities to fly over or land in foreign countries.
7. The aircraft shall be suitably insured to cover at least third part liability.
Note
Applications shall be made two working days prior to the date of commencement of delivery flight
CAD Form ATC-02, Issue 2, September 2010 Page 1 of 2