DIVISION 10 - SPECIALTIES
SECTION 10 51 13
METAL LOCKERS
CP Furniture Systems, Inc. - CAMBIO LINE (S6000)
This guide specification covers the general requirements for metal lockers for storage of personal belongings.
Show the following information on the drawings:
- Location, grade and size, quantity, and color of lockers (plans).
- Trim, accessories, and adjoining surfaces details (elevations).
- Mounting details and whether legs, base panels, or pre-built bases are required (details).
**************************************************************************
- PART 1 GENERAL
**************************************************************************
1.1.REFERENCES
1.1.1.External References:
1.1.1.1.ADAAG - Americans with Disabilities Act, Accessibility Guidelines.
1.1.1.2.ASTM A 1008 - Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability.
1.1.1.3.ASTM D523 – Standard test method for speculargloss (similar to ISO 2813)
1.1.1.4.ADA parallel reach requirements.(for maximum accessibility)
1.1.1.5.ADA forward reach requirements. (for narrow reach areas)
1.1.2.Related Sections
1.1.2.1.Section 06 10 53 - Miscellaneous Rough Carpentry for securing lockers to bases and walls.
1.1.2.2.03 30 53 - Miscellaneous Cast-in-Place Concrete for locker bases.
1.2.SUBMITTALS
1.2.1.Comply with 01 33 00 Submittal Procedures
1.2.2.Provide manufacturer’s product data
1.2.3.Shop drawings showing plan and elevation with clearance requirements, accessories and anchoring detail
1.2.4.Provide numbering system and lock control chart
1.2.5.Three manufacturer’s standard color charts suitable for color selection
1.3.DELIVERY, HANDLING, AND STORAGE
1.3.1.Storage: Store materials in clean, dry, indoor areas.
1.3.2.Handling: Protect materials and finish during handling and installation to prevent damage to lockers or adjacent work.
1.4.FIELD MEASUREMENTS
To ensure proper fits, make field measurements prior to the preparation of drawings and fabrication. Verify correct location.
1.5.QUALITY ASSURANCE
Provide lockers from a manufacturer with a minimum of 10 years experience with a similar product and with aneight (8) year warranty.Install by a crew with a minimum of 10 years experience with a similar product and with a one year warranty.
1.6ALTERNATIVES
No alternatives will be allowed or considered
**************************************************************************
- PART 2 PRODUCTS
**************************************************************************
2.1.MANUFACTURER
C + P Möbelsysteme GmbH & Co. KG, Breidenbach, Germany with US Headquarter, CP Furniture Systems, Inc., 222 Merchandise Mart Plaza, Suite 10-166, Chicago, IL 60654
2.2.MATERIAL
2.2.1.ASTM A 1008 cold rolled steel sheet doors, bodies and accessories
2.2.2.Zinc plated bolts, rivets, nuts, and interior equipment.
2.2.3.Liquid or Powder coat Finish on steel sheet bodies, doors, and accessories.
2.2.3.1.Surface Preparation: Clean and treat locker components with multi-step detergent/iron phosphate coating, rinse with cold water, and seal with non-chrome treatment.
2.2.3.2.Finish Coat: Apply finish topcoat of 1-1.2mm thick high-solids polyester paint over primer withelectrostatically charged dipping/spray process.
2.2.3.3.Paint exposed and concealed parts the same color.
2.2.3.4.Paint corrosion resistant. UV resistant upon request
2.3.BODIES
2.3.1.Tops and bottoms with three sides formed 90 degrees for strength, the front offset formed to be flush with horizontal frame member.
2.3.2.Sides to be formed with intermediate stiffener ribs.
2.3.3.Shelves with four sides formed to 90 degrees
2.3.1.All parts on assembled lockers shall be securely welded.
2.3.2Tops and bottoms are to be a single piece for the entire locker grouping with three sides formed at 90 degrees and the front is to be channel formed and welded to each vertical frame member.
2.3.3Backs are to be a single piece for the entire group of lockers.
2.3.4.Fully framed lockers shall provide structural resistance to force in all three planes.
2.3.5.Body, Frame & Door colors (RAL or RDS) to be specified on drawings
2.3.6.All colors according to ASTM D523, specular gloss measured on a 60 degree angle
2.4.DOOR CONSTRUCTION
2.4.1.Cambio Locker Doors stamped from one single, solid piece of steel, double walled. Corners are folded into each other, thus highly warp resistant. All corners are rounded.
2.4.2.Door to be fitted with limiter to be set to 90 degrees angle and stop silencer
2.4.3.Door opening to the right with door integrated hinges (made of Aluminum die cast & plastic)
2.4.4.Doors to be insulated with honeycomb cardboard, sealed on all sides (100% moisture proof)
2.5.FRAME
2.5.1.CambioLocker is available in
Full height with 1,2,3,4,5 or 6tier configurations
Z-Configuration
Z-Configuration Combination with 2 tier
Corner lockers(to bridge a 90 degree inside corner or to wrap around a 90 degree or 180 degree outside corner) 1, 2 tier
2.5.2.Measurements:
Full height: 1850mm high; 525mm deep; 1x1 frame 300 or 400mm wide, 2x1 frame 600 or 800mm wide, 3x1 frame 900 or 1200mm wide, 4x1 1200mm wide; 1x2 frame 300 or 400mm wide, 2x2 frame 600 or 800mm wide, 3x2 frame 900 or 1200mm wide, 4x2 1200mm wide; 1x3 frame 300 or 400mm wide, 2x3 frame 600 or 800mm wide, 3x3 frame 900 or 1200mm wide, 4x3 1200mm wide; 1x4 frame 300 or 400mm wide, 2x4 frame 600 or 800mm wide, 3x4 frame 900 or 1200mm wide, 4x4 1200mm wide; 1x5 frame 300 or 400mm wide, 2x5 frame 600 or 800mm wide, 3x5 frame 900 or 1200mm wide, 4x5 1200mm wide; 1x6 frame 300 or 400mm wide, 2x6 frame 600 or 800mm wide, 3x6 frame 900 or 1200mm wide, 4x6 1200mm wide
Z-configuration: 1850mm high, 525 deep; 1x1 (2 lockers) 300 or 400mm wide, 1x2 (4 lockers) 600 or 800mm wide, 1x3 (6 lockers) 900 or 1200mm wide, 1x4 (8 lockers) 1200mm wide
Z-Combination (2 zlockers-2tier locker-2 zlockers in one frame, total 6 lockers) 900 or 1200mm wide
Corner lockers: 1850mm high; 500mm-213mm depth
Custom sizes
2.5.3.Net locker dimensions:
Full height/Z-Configuration/Z-Configuration Combination: 1tier 1610mm H x 250/350mm W x 455mm D; 2tier 780mm H x 250/350mm W x 455mm D; 3tier 502mm H x 250/350mm W x 455mm; 4tier 363mm H x 250/350mm W x 455mm D; 5tier 279mm H x 250/350mm W x 455mm; 6tier 224mm H x 250/350mm W x 455mm
Corner Locker: 1tier: 1610mm H x 250mm W x 260mm D, 2 tier: 780mm H x 250mm W x 260mm D
2.5.4.Locker to come with plinth (150mm high) with 40mm individual height adjustment (up to 190mm high)- feet. Or full base – 100mm high with approx. 60mm adjustment
2.6.DOOR LOCKS
2.6.1.Standard to be Cylinder lock with keys
2.6.2.Optional available locks (specify on drawings):
2.6.2.1.Cylinder lock with 2 keys (standard)
2.6.2.2.Safety turning bolt for padlock use
2.6.2.3.Electronic Combination lock
2.6.2.4.Biometric (fingerprint) lock
2.6.2.5.Custom, specify on drawings
2.7.LOCKER VENTILATION
2.7.1.Ventilation in rear of locker as standard
2.7.2.Forced ventilation through external venting system connecting into top of Cambio (by others)
2.7.3.Forced hot air ventilation through external venting system connecting into top and bottom of Cambio (by others) unit to be housed in one locker frame
2.8.LOCKER FINISH/OPTIONS
2.8.1.Standard front: steel in many different colors (RAL or RDS) to be
specified on drawings
2.8.2.Standard interior fit: 1tier: Hat shelf, coat rail & 4 hooks;
2tier: coat rail & 4 hooks; Z-configuration: coat rail and 3
coat hooks; Corner locker (1, 2 tier): hat shelf and 2 triple
swivel hooks
2.8.3.Optional front finish available in phenolic (HPL, alsowith
Vectogram) 13mm thick – color/finish to be specified on drawings,
see CP Furniture Systems, Inc.’s current catalog for color/finish
options
2.8.4.Optional sloping top, approx. 230mm high in the rear, available
for all body widths, 26 degree angle; optionally LED lighting
integrated
2.8.5.Optional Number (or Pictograms) plates (self-adhesive, plastic or
S.S)
2.8.6.Optional accessories (please specify on drawings): shoe tray,
coat hanger with laundry net, coat hanger with multifunction
hooks, towel hanger, inside mirror (300mm x 180mm) for Steel &
HPL doors only, towel holder (on right) for HPL doors only, towel
holder and shower gel holder on right for HPL doors only, sandal
holder for HPL doors only, glass shelf (8mm safety glass),
foldable storage area made of steel
2.8.7.Optional middle or end reveals: Center gap reveal available in
steel in 110mm, 145mm, 180mm, 215mm, 250mm widths or custom;
Inside corner (90 degrees) available in steel in 55mm & 110mm
widths or custom; Outside corner (90 degrees) available in steel
in 500mm or custom;other materials available in custom only.
Available for sloping tops also. End reveals: Full face mirror
with options of 2 LED lighting strips on either side and LED
lighting strip and 2 electrical outlets, single row 500mm W x
1700mm H, Double row 1000mm W x 1700mm H; also available with 2
electrical outlets and tray
2.8.8.Optional security compartment, location and lock system to be
specified on drawings
**************************************************************************
- PART 3 EXECUTION
**************************************************************************
3.1.EXAMINATION
3.1.1.Do not begin installation until substrates and bases have been properly prepared.
3.1.2.Substrate and bases are the responsibility of another installer; notify Architect of unsatisfactory preparation before proceeding.
3.2.INSTALLATION
3.2.1.Install metal lockers and accessories at locations shown in accordance with manufacturer's instructions.
3.2.2.Install lockers plumb, level, and square.
3.2.3.Anchor lockers to floor and wall according to manufacturer’s recommendation.
3.2.4.Secure adjoining locker units together to provide rigid installation.
3.2.5.Install sloping tops and metal fillers using concealed fasteners. Provide flush hairline joints against adjacent surfaces.
3.2.6.Install front bases between legs without overlap or exposed fasteners. Provide end bases on exposed ends.
3.2.7.Install benches by fastening bench tops to pedestals and securely anchoring to the floor using appropriate anchors for the floor material.
3.3.ADJUSTING AND CLEANING
Adjust doors and latches to operate without binding. Verify that latches and locks are operating satisfactorily. Verify that ADA lockers operate according to code.
-- End of Section --
SECTION 10 51 13
Section 10 51 13, Metal Lockers – CP Furniture Systems, Inc. – Cambio Line (S6000)1