Agip

GR MU

DIN 51 825 T.1

GP 00 K –30

GP 0 K -40

K 2 K -20

K 3 K –20

Agip GR MU are high-quality lithium soap special-lubricating greases and special-gearbox greases based on mineral oil.

Characteristics (typical figures):

Agip GR MU / Unit / 00 / Test method
NLGI consistence class / 00 / DIN 51 818
Thickener / Li
Working temp. range / °C / -30/+120
Drop point / °C / 175 / DIN ISO 2176
Behaviour against water Rating at test temperature / Stage / 1 - 90 / DIN 51 807 T.1
Designation / GP00K-30 / DIN 51 825 T.1

Properties and Performance:

Due to its high work resistance and resistance against formation of air foam emulsions Agip GR MU 2/3 exceeds the conventional lithium soap greases. Also during extensive working times in high loaded bearing and drive systems there are no changes, so that due to sufficient stability the regreasing intervals can be prolonged. The product is resistant against cold and hot water and therefore can be used as water pump grease for bearings, which are exposed to ingress of water at higher temperatures. Due to its high ageing resistance there is no formation of resin or hardening.

Agip GR MU 0/00 is suitable for the filling gearbox cases of spur gears, bevel gear differentials, worm gears and similar industrial gears, also at increased working temperatures.

Applications:

Due to its high loadability as multi-purpose grease Agip GR MU 2/3 is favourably suitable for the lubrication of sliding and roller bearings under severe operational conditions.

Agip GR MU 0 is a gearbox grease for the application in highly loaded spur gears, bevel gear differentials, worm gears and similar industrial gears. It is also applicable for central lubricating systems and meets the requirements of the Company Groeneveld as well as the MAN specification 283 Li-P 0.

Agip GR MU 00 is a gearbox grease for the application in high loaded spur gears, bevel gear differentials, worm gears and similar industrial gears.

If possible a mixture of greases with different soap basis should be avoided, since the special properties could be impaired.

Please observe the manufacturer’s specifications when selecting products.

Additional physical-technical data:

Agip GR MU / Unit / 00 / 0 / 2 / 3 / Test method
Worked penetration / 0,1 mm / 400-430 / 355-385 / 265-295 / 220-250 / DIN ISO 2137
Corrosion protection properties according to SKF-Emcor-Test / Corr.-grade / 0 / 0 / 0 / DIN 51 802
Corrosion effect on copper / Corr.-grade / 1 - 90 / 1 - 90 / 1 - 90 / 1 - 90 / DIN 51 811
Content of solid foreign substances over 25µm / mg/kg / < 20 / < 20 / DIN 51 813 T.1
(mod.)
Water content / Mass % / < 0,1 / < 0,1 / < 0,1 / < 0,1 / DIN ISO 3733
Test in the VKA welding load / N / 2200 / 2600 / 2200 / 2200 / DIN 51 350 T.4
Test with the SKF-Wälz-Lagerfett-Prüfmaschine (roller bearing grease test machine). Test run B
passed at test temperature / °C / 110 / 110 / 120 / 120 / DIN 51 354 T. 2
Designation / GP00K-30 / GP0K-40 / K 2 K-30 / K 3 K-20 / DIN 51 502

Health instructions: Follow the safety instructions!

Water hazardous class (WGK): 1 self-classification according to VwVwS

Waste disposal number: 12 01 12

Agip Schmiertechnik GmbH

Paradiesstraße 14, 97080 Würzburg / VTT 11/03
Postfach51 80, 97001 Würzburg / Print: 11/03
Telefon: (09 31) 9 00 98-0 / 0881e-85
Telefax: (09 31) 9 84 42
Subject to alteration.