Asia Pacific Conference on Optics Manufacture 2009

APCOM 2009, Taipei

2009 Asia Pacific and 1stCross-Strait Conference on Optics Manufacture 2009

February 11-14, 2009

Let there be light; let light be brighter.

Call for papers

Objective：

The Pacific region has become a manufacturing hub for optical components and optoelectronics. These optical devices are widely used in various consumer and scientific products, instruments and lighting systems. The first Cross-Strait Conference on Optics Manufacture 2007(APCOM2007) has been successfully held in Hong Kong. It gathered more than 200attendees. The papers has been published in 2 special volumes of “Advances in Optics Design and Precision Manufacturing Technologies”The second APCOMand 1st Cross-Straitwill be held on 11th -14th February, 2009 in Taipei. APCOM2009 aims to provide an exciting platform for the international exchange of latest research findings and developments in the area of optical design, advanced optics manufacturing technology and optical measurement. It also intends to promote the sharing of ideas and emerging technologies, as well as to foster R&D collaboration amongst academics, research institutions and the relevant industries. (An Exhibition will be provided for industrialists to exhibit their products and offer souvenirs)

Organized by：

Co-organized by：

Co-sponsored by：

Scope of the APCOM2009：

The advanced demands toward optical and electric products to be functional, light, thin and small are increasing and especially in (1)Light Capture, (2)Display, (3)Optical Communication, (4)Storage, (5)Lighting System, and (6)Solar Concentrator. With the requirement of low cost and high throughput, it is necessary to integrate every link in up and down comprehensively for improving manufacturing technology in photonics continuously. Topics of relevant fields are planned as following:

Optics and Interferometry

Advanced Optics Design

Modeling and simulation

Advanced Optics Manufacturing Technologies

Precision and Ultra-precision Machining Technology

Micro Molding Technology

Fabrication of Optical Microstructures

Fabrication of Aspheric and Freeform Optics

Glass Molding Technology

Precision Metrology and Surface Characterization

Optical Testing, Measurement and Instrumentation

Advanced Optical Materials

Design and Manufacturing of Displays

LED Illumination Technology

Optical Fiber & Photonics

Nano- and Micro-electrical-mechanical-optical Systems

Integration of Optical System

Abstract and Manuscript Submission:

Using the on-line registration system to submit your abstractat,If you have any problems in submission, please send by emailto .

Selected papers will be published in Journals “Journal of Polymer Engineering (SCI)” and “International Journal of Polymers and Technologies(EI)”

Registration Information:

Registration fee:

* Registration fee includes: a banquet, reception, lunches, admission to all conference sessions.

1

Important Dates:

Abstract due: July31, 2008

Abstract acceptance notification: August31, 2008

Receipt of camera ready paper: October31, 2008

Notification of final acceptance: November31, 2008

Conference Date: February 11-14, 2009

CONFERENCE CHAIRMAN

Prof. Sen-YeuYang, NationalTaiwanUniversity

CO-CHAIRMAN

Prof. YoKoi, TokyoUniversity

ACADEMIC COMMITTEE

Prof. Chao-Chang Chen, NationalTaiwanUniversity of Science and Technology, Taiwan

Prof. Yung-Kang Shen, Taipei Medical University, Taiwan

Prof. Liang-Chia Chen, National TaipeiUniversity of Technology, Taiwan

Prof. Jong-Woei Whang, NationalTaiwanUniversity of Science and Technology, Taiwan

Prof. Shia-Chun Chen, ChungYuanChristianUniversity, Taiwan

Prof. Shih-Jung Liu, Chang Cung University, Taiwan

Prof. Rong-Yeu Chang, National Tsing Hua University, Taiwan

Prof. Ren-Haw Chen, NationalChiaoTungUniversity, Taiwan

Prof. Shi-Chang Tseng, NationalYunlinUniversity of Science and Technology, Taiwan

Prof. Sheng-Jye Hwang, National Cheng Kung University, Taiwan

Prof. Chung-Ching Huang, National Kaohsiung University of Applied science, Taiwan

Prof. Ching-Hua Hung, NationalChiaoTungUniversity, Taiwan

Prof. Pei-Jen Wang, National Tsing Hua University, Taiwan

Prof. Chii-Rong Yang, National Taiwan Normal University, Taiwan

Prof. Kuang-Chao Fan,National Taiwan University, Taiwan

Prof. Yunn-Shiuan Liao, National Taiwan University, Taiwan

Conference Secretary

Jing-Tang Wu, National Taiwan University, Taiwan

INTERNATIONAL SCIENTIFIC

COMMITTEE

Prof. Y.W. Mai, University of Sydney, Australia

Prof. Un Chung Cho, Korea Polytechnic University, Korea

Prof. Yong Tian Wang, Beijing Institute of Technology, China

Prof. Guo Xing Zhang, Tianjin University, China

Prof. Wei Gao, Tohoku University, Japan

Prof. Allen Yi, OhioStateUniversity, Columbus, USA

Prof. Ing Volker Hans, University of Essen, Germany

Correspondence:

For further information, please check thewebsite:

Other enquiries should be directed to:

Jing-Tang Wu

Department of Mechanical Engineering

NationalTaiwanUniversity

No. 1, Sec. 4, Roosevelt Road, Taipei, 10617 Taiwan

TEL: +886-2-2362-5753

FAX: +886-2-83695574

E-mail:

1