Architectural CADD Final Exam

You will draw a replica of the storage shed. It must follow the requirements listed below. If you click on “enable editing” above you will be able to zoom into view easier.

http://www.familyhomeplans.com/project_details.cfm?ProjectNumber=90020&OrderCode=C101

Requirements –

· Be drawn to scale as shown in the drawing

· On your elevations change Level 1 to 01-Entry Level and Level 2 to 02-Roof with a height of 8’0”

· Follow the roof plan shown for which walls to slope all walls must have a 1’ overhang

· Walls – Basic Wall Exterior-EIFS on MTL. Stud with an 8’0” height

· A building pad – pay attention to the extended footprint

· 5x5 Wood Timber Columns that meet the extended roof; bonus points if you can figure out how to run a timber horizontally to connect the columns and one vertically from the middle of the horizontal one to the roof.

· Site plan any size with grass

· Sidewalk leading up the floor

· 2 windows in the same location as shown using a casement 3x3 with trim 36”x48”

· Using Revitcity.com login in using username lphscadd; password hello click on Download and search the French Quarter Doors for the door to the shed

· Paint the roof surface to “roofing - wood shake”; to do this you must be in 3d view, select the modify tab, then to the left of the move tool is the geometry section and in the 3rd column is the paint tool. Select the surface you want to paint and then choose roofing-wood shake.

· You will also pain the edge of the roof with “trim” and underneath the roof to “wood sheathing-plywood” the exterior walls should be “plaster and lathe”

· On one title block put the 3d view, in hidden line form, floor plan and 4 elevations. All of the views should be ¼” = 1’0” scale except for the floor plan should be ½”=1’0”

· Fill in the title block with the following – Owner – O’Connor / Project Name -Shed / Unnamed – Final Exam / Project Number – 1 / Date – Today’s date / Drawn By – Your Name / Checked by – O’Connor