What Is Originality

What Is Originality

Chemistry

Standard VI, Objective 1

Title: OSCILLATING CLOCK

Description: Students will follow a set of directions that lead to the “oscillating clock” reaction. They will need to do careful molarity calculations and measurements for it to work correctly.

Time Needed: 60-80 minutes

Materials:

  • Malonic acid, CH2 (COOH)2
  • potassium iodate KIO3
  • manganese sulfate (available as the mono-hydrate (MnSO4 · H2O).
  • 50.0 mL of 3.6 M hydrogen peroxide (H2O2)
  • 3% [w/v] starch in a dropper bottle.
  • 2.00 M solution sulfuric acid

Background:

The Oscillating Clock demonstration, based on the Briggs-Rauscher (BR) reaction, provides a visually impressive reaction in which a solution oscillates in color between amber-orange and blue-black. The solution will oscillate approximately 10-15 times, with the time between color changes increasing as the reaction proceeds. After about 15 minutes, the oscillations will stop and the solution will remain blue-black in color.

The BR reaction was developed as a hybrid of two other oscillating reactions, the Bray-Liebhafsky (BL) reaction and the Belousov-Zhabotinsky (BZ) reaction. In the BL reaction, H2O2 was used as both an oxidizing and reducing agent to cause oscillations between I2 and IO3-. In the BZ oscillating reaction, organic compounds such as malonic acid were used along with electron transfer agents such as Mn(II) ions. The BR reaction utilized the H2O2 and IO3- from the BL reaction and the malonic acid and Mn(II) ions from the BZ reaction to develop a reaction that caused the oscillation of the evolution of oxygen and carbon dioxide gases and the concentration of iodine and iodide ions, which accounts for the observed color changes.

The mechanism for the BR reaction has been studied extensively, and the origin of the [I2] and [I-] oscillations has been explained. However, the proposed mechanism is unable to account for the production of CO2 gas and does not identify the final organic products of the reaction. This reaction, therefore, is a prime example of the ongoing exploration by chemists of phenomena that we can visibly observe, but not yet explain.

Procedures:

1. The lab can be performed as a demonstration or as a student lab. To prepare demonstration sized quantities, use the following calculations:

Solution A: 3.6 M H2O2

· Pour 400 mL of distilled water into a 2 L beaker.

· Wearing gloves, pour 410 mL of 30% H2O2 into the beaker of water. Dilute the solution to 1 L with distilled water. (This solution should be prepared fresh for each day of demonstrations.)

Solution B: 0.2 M KIO3 and 0.08 M H2SO4

· Place 43 g of KIO3 and ~800 mL of distilled water in a 2 L beaker.

· Add 4.3 mL concentrated H2SO4 to this mixture.

· Warm and stir the mixture until the KIO3 has dissolved. Dilute to 1 L with distilled water.

Solution C: .15 MCH2(COOH)2, .02 M MnSo4-H2O and Starch

  • Dissolve 16 g of malonic acid and 3.4 g of MnSO4-H2O in 500 mL of distilled water in a 2 L beaker.
  • In a 100 mL beaker, heat 50 mL of distilled water to a boil.
  • In a 50 mL beaker, mix 3g of soluble starch with 5 mL of distilled water and stir to form a slurry. Our the slurry into the boiling water and continue heating and stirring until the starch has dissolved.
  • Pour this start solution into the malonic acid/MnSO40H2O mixture.
  • Dilute the mixture to 1 L with distilled water

2. For a student lab, direct the students to the materials and read over the procedures on the student sheet below. You will need to prepare the starch and hydrogen peroxide solutions in advance.

3. This website provides a visual presentation but not the results of the activity. The students might also be encouraged to try some of the variables listed on this page:

student sheetName______

Title: Oscillating Clock

Introduction: The study of chemistry requires students to learn to make careful measurements and calculations. A small error can lead to inaccurate results or even missing the exciting reaction altogether. In this experiment you will practice your ability to correctly calculate how to make solutions and correctly prepare these solutions. Your reward is a very cool reaction called the oscillating clock, a phenomenon not entirely understood by science!

Materials:

  • Malonic acid, CH2 (COOH)2
  • potassium iodate KIO3
  • manganese sulfate MnSO4 · H2O
  • 50.0 mL of 3.6 M hydrogen peroxide (H2O2)
  • 3% [w/v] starch in a dropper bottle.
  • 2.00 M solution sulfuric acid
  • graduated cylinders
  • test tubes and rack (optional)

Prediction: How could a chemical reaction act like a clock?

Procedures:

1. Prepare or gather the following solutions:

  • solution 1-100.00 mL of 0.150 M malonic acid (CH2(COOH)2 and 0.0200 M manganese sulfate (MnSO4)
  • solution 2-100.00 mL 0.20 M potassium iodate (KIO3) in 0.0800 M sulfuric acid. 50.0 mL of 3.6 M hydrogen peroxide (H2O2)
  • solution 3-You will be provided with 50.0 mL of 3.6 M hydrogen peroxide (H2O2) and 3% [w/v] starch in a dropper bottle.

2. Add 20.0 mL of each of the 3 solutions (1,2, 3) to a graduated cylinder or large test tube.

3. Make sure you have created a data table to record your observations of the mixtures after the reactions start.

4. Add several drops of starch to each tube. Record your observations.

Data:

Analysis:

1. How were these reactions like a clock?

2. Why are they called oscillating?

3. Did any of your preparations not work? Why do you think that was?

4. Why is precise measurement and calculation important in a reaction such as these?

5. What variables could you change in these reactions to change their equilibrium?

Conclusion:

Top View