WAKESURF SHAPER
A NEW WAY
TO MAXIMIZE YOUR WAKE
The hottest product to hit wakesurfing since we created the wakesurfer. This device easily mounts to the lower/back point of the starboard or port side of your boat hull for a premier surf wake on either side. We have tested every aspect of surfing using- waterski boats, crossover boats, older V-Drives, newer V-Drives, and one thing is constant, this is a game changer. In addition to turning wakes into swells - the best part is you no longer have to weight your boat unevenly. Gone are the days of filling and draining your bags to the port or starboard side - keep it all in the center.
There has never been this type of aftermarket innovation that can so easily be mounted to the side of the hull - that makes this kind of difference.
With a built in handle it is easy
to move to either side of your boat,
and is best paired with a loaded
Eight.3 ballast system.
•SHIM OPTIONS
The shim is a simple attachment between the Wakesurf Shaper and a boat’s hull. Every hull shape is different -
some are mostly flat and don’t require a shim. Others have a step hull and require a 1” shim - other boats have a more pronounced step and need a 2” shim, while in some cases you might need both shims to make a 3” gap between the hull and your Wakesurf Shaper. For installation - we
recommend the Wakesurf Shaper is 80% subgmerged when boat is properly weighted and as close to the stern as your hull will allow.
WAKESURF SHAPER
PLACEMENT
The adhesive fastener strips that attach to the boat are intentionally 6” longer than the Wakesurf shaper. This allows for further adjustment towards the bow or the stern of the boat greatly altering the shape of the wake. When closer to the stern, the wake becomes steeper, and deeper - closer towards the bow and the wake gets a longer sweet spot - who says you can’t surf tandem?
*Comes complete with: Wakesurf Shaper, 2 adjustable shims, 4 adhesive fastener strips, instructional USB, and an owner’s manual.
*Below are a few illustrations of the countless boat hulls we’ve tested on.
WAKESURF SHAPER
Last year we came out with our revolutionary Wakesurf Shaper. A great way to convert many boat models into the world of wakesurfing and easily adjust on the fly for both goofy or regular foot surfers. We took our best selling Eight.3 product and gave the shape a major overhaul - along with adding a larger size for the biggest/cleanest wave we have ever tested.
NEW STANDARD
DESIGN
Standard Size Dimensions
15.5” - Boat Surface Length
21” - Water Surface Length
11” - Height
7.5” – Depth
NEW X-LARGE DESIGN
Whoever came up with the phrase less is more hasn’t used our new XL product. The biggest/cleanest wake regardless of the size of your boat. If your boat has enough room to apply the 19.5” long running surface using our shims - there is no reason to not use an XL version.
XL Size Dimensions
19.5” - Boat Surface Length
26” - Water Surface Length
12.5” - Height
9” – Depth
NEW DESIGN
The change - we added a concave thru the center with a greater, more defined leading edge.
The result - more effective job of diverting a column of water creating less drag on the boat with improved fuel efficiency than last year’s model. Designed for the surfer that wants the biggest inboard swell.
TELESCOPE TECH
A SIMPLER, FASTER PROCESS
HIGH VELOCITY FILL PORT
Our Eight.3 pump has a spring loaded quick connect male adapter, that is designed to easily clamp onto the high velocity fill port. Ever had an unexpected flying water hose in your boat? Not no mo’. This 1 1/2” diameter fill port has a check valve water gate and a water tight rubber cap. Fitted for our high powered Eight.3 3000GPH or 3700GPH pumps.
VENT PORT
Eight.3 new port caps are all made with two sided vent slots which helps burp the Eight.3 system of all extra air while filling - more water equals more weight. Fill without taking off the cap completely and potentially losing it. These new 1” diameter port cap threads are twice as long, for a water tight fit.
ANTI-ROLL DESIGN
A trapezoid anti-roll shape preventing your bag from flopping around in your boat as easy.
DRAIN PORT
In addition to draining the water here, you can also plumb this 1” diameter port into the Plug & Play of your boat.
TELESCOPING DRY CHAMBER
Drop any size pump into our patented submersible ballast bag to drain the weight without having to attach any nozzles. The bigger the pump the quicker it drains without the inconvenience of air locking and re-priming. Because there is no priming involved with the nozzle you can now turn up the volume and use the industry’s fastest 3700 gallon per hour pump.
WATERPROOF ZIPPER
All Eight.3 telescoping chambers include an easy to open/close TiZip waterproof zipper.
TELESCOPE COVER
This covers the telescope dry chamber until you are ready to empty your Eight.3 ballast system. It also acts as your alarm clock when you are filling to let you know you’re done. Not sure what we mean? Fill one up and you’ll see, it’s pretty entertaining.
SUBMERSIBLE PUMP
We offer two submersible 12 volt pumps to fill and drain your system up to 3 times faster than any other system out there.
- 3700GPH 20AMP Power Adapter
*suggested for use on 2009 boats and newer
- 3000GPH 12AMP Power Adapter
*suggested for use on 2009 boats and older
Each pump comes with
- 12ft long water hose to fill and drain
- 1.5” Diameter Hose
- 15ft Long 12V Power Adapter with on/off toggle switch
HEAVY DUTY SHELL
Every Eight.3 system is crafted using ultra high tensile reinforced materials, and sonic welded seams. #prettytechstuff
PATENTED TELESCOPE TECHNOLOGY
The fastest fill and drain system in boating
TELESCOPE
LOCKER/SEAT BALLAST
Our simple and fast system in a design that fits under your seats, locker or on the floor
KEY FEATURES:
• Telescoping chamber with TiZip waterproof zipper
• 60 gauge heavy dutytarpoulin materials
• High strength sonic welding seams
• 1.5” diameter fill port
• Three 1” diameter external drain/vent ports
• Shaped to fit under your seats, locker or on the floor
SIZES
CTN 250lbs (113kg) - Silver / Scuderia
Size: 45”L X 17”W X 8”H
114.3cm L X 43.18cm W X 20.32 cm H
CTN 360lbs (163kg) - Silver / Scuderia
Size: 62”L X 16”W X 10”H
157.48cm L X 40.64 WX 25.4cm H
TELESCOPE
TRAPEZOID BALLAST
In addition to having a simpler, faster system, these bags have anti-roll shapes that won’t flop around in your boat as easily
KEY FEATURES:
• Telescoping chamber with TiZip waterproof zipper
• 60 gauge heavy dutytarpoulin materials
• High strength sonic welding seams
• 1.5” diameter fill port
• Three 1” diameter external drain/vent ports
• Shaped to fit under your seats, in your locker or on the floor or bow
SIZES
CTN 400lbs (181kg) - Black / Gold -or- SIlver / Scuderia
Size: 42”L X 18”W X 16”H
106.68cm L X 45.72m W X 40.64cm H
CTN 800lbs (363kg) – Black / Gold -or- Silver / Scuderia
Size: 50”L X 22”W X 20”H
127 cm L X 55.88m W X 50.8cm H
CTN 1100lbs (499kg) – Black / Gold -or- Silver / Scuderia
Size: 50”L X 26”W X 24”H
127cm L X 66.04cm W X 60.96cm H
TELESCOPE
FLOOR BALLAST
Weighting the mid portion of your boat is key to maintaining the right distribuition for a bigger size wake
KEY FEATURES:
• Telescoping chamber with TiZip waterproof zipper
• 60 gauge heavy dutytarpoulin materials
• High strength sonic welding seams
• 1.5” diameter fill port
• Two 1” diameter external drain/vent ports
SIZES
CTN 400lbs (181kg) - Silver / Scuderia
Size: 35”L X 35”W X 9”H
88.9cm L X 88.9cm W X 22.86 cm H
CTN 650lbs (295kg) - Silver / Scuderia
Size: 45”L X 45”W X 9”H
114.3cm L X 114.3 WX 22.86cm H
CTN 800lbs (363kg) - Silver / Scuderia
Size: 45”L X 55”W X 9”H
114.3cm L X 139.7 WX 22.86cm H
TELESCOPE
BOW BALLAST
Available in triangle, pickle-fork and U-shapes to fit most open bow boat options
KEY FEATURES:
• Telescoping chamber with TiZip waterproof zipper
• 60 gauge heavy dutytarpoulin materials
• High strength sonic welding seams
• 1.5” diameter fill port
• Multiple 1” diameter external drain/vent ports
SIZES
CTN 600lbs (272.2kg) - Silver / Scuderia
Size: 54”L X 54”W X 12”H
137.2cm L X 137.2cm W X 30.48cm H
CTN 950lbs (430.9kg) - Silver / Scuderia
Size: 54”L X 54”W Rear / 27”W Front X 12”H
137.2cm L X137.2cm W Rear / 68.58cm Front X 30.48cm H
CTN 500lbs (227kg) - Silver / Scuderia
Size: 62”L X 48”W X 8”H
157.48cm L X 121.92 WX 20.32cm H
PLUG & PLAY
The direct connection to your boat’s existing pump system fits most V-drive and bow lockers with enough room left over to put your Ronix products on top.
TRAPEZOID BALLAST
KEY FEATURES:
• 60 gauge heavy dutytarpouline materials
• High strength sonic welding seams
• Four 1” diameter external fill/drain/vent ports
• Now available to use as an external ballast with
our new 1200GPH pump system (see page 31 for pump)
SIZES
CTN 400lbs (181.4kg) - Silver / Scuderia
Size: 42”L X 18”W X 14”H
106.68cm L X 45.72cm W X 35.56cm H
CTN 800lbs (362.8kg) - Silver / Scuderia
Size: 50”L X 22”W X 18”H
127cm L X55.88cm W X 45.72cm H
BOW BALLAST
KEY FEATURES:
• 60 gauge heavy dutytarpoulin materials
• High strength sonic welding seams
• Multiple 1” diameter external fill/drain/vent ports
• Now available to use as an external ballast with
our new 1200GPH pump system (see page 31 for pump)
SIZES
CTN 500lbs (227kg) - Silver / Scuderia
Size: 62”L X 48”W X 8”H
157.48cm L X 121.92cm W X 20.32cm H
CTN 600lbs (272.2kg) - Silver / Scuderia
Size: 54”L X 54”W X 12”H
137.16cm L X 137.16cm W X 30.48cm H
TAPERED BALLAST
KEY FEATURES:
• 60 gauge heavy dutytarpoulin materials
• High strength sonic welding seams
• Multiple 1” diameter external fill/drain/vent ports
• Now available to use as an external ballast with
our new 1200GPH pump system (see page 31 for pump)
SIZES
CTN 550lbs (249.5kg) - Silver / Scuderia
Size: 36”L X 18”W X 18”H
91.44cm L X 45.72cm W X 45.72cm H
CTN 700lbs (317.5kg) - Silver / Scuderia
Size: 40”L X 18”W X 24”H
101.6cm L X 45.72cm W X 60.96cm H
MALIBU AND
AXIS SERIES
PLUG & PLAY
KEY FEATURES:
• 60 gauge heavy dutytarpoulin materials
• High strength sonic welding seams
• Three 1” diameter external fill/drain/vent ports
KEY FEATURES:
FITS: 2016/2017 AXIS MODELS:
T22, T23, A20, A22, A24
FITS: 2016/2017 MALIBU MODEL:
M235
SIZE
CTN 750lbs (340kg) - Silver / Scuderia
Size: 50”L X 21”W X 19”H
127cm L X 53cm W X 48cm H
SKU - MA 100
FITS: 2017 MALIBU MODELS:
22MXZ, 24MXZ – Standard
CTN 540lbs (245kg) - Silver / Scuderia
Port/Starboard Specific
Size: 41”L X 19”W X 20.5”H
104.1cm L X 48.3cm W X 67.3cm H
SKU - MA 115
FITS: 2017 MALIBU MODEL:
24MXZ – Max
Port/Starboard Specific
CTN 650lbs (295kg) - Silver / Scuderia
Size: 41”L X 20.5”W X 26.5”H
104.1cm L X 52cm W X 67.3cm H
SKU - MA 120
FITS: 2016 MALIBU MODELS:
20MXZ, 22MXZ, 24MXZ
CTN 650lbs (295kg) - Silver / Scuderia
Size: 41”L X 22.25”W X 26.5”H
114cm L X 52.7cm W X 67.3cm H
SKU - MA 105
FITS: MALIBU MODELS:
20VTX, 22VLX, 23 LSV, 25 LSV
CTN 675lbs (306kg) - Silver / Scuderia
Size: 50”L X 20”W X 24”H
127cm L X 50cm W X 61cm H
SKU - MA 110
FITS: 2017 MALIBU MODELS:
22MXZ, 24MXZ – Standard
CTN 540lbs (245kg) - Silver / Scuderia
Port/Starboard Specific
Size: 41”L X 19”W X 20.5”H
104.1cm L X 48.3cm W X 67.3cm H
SKU - MA 115
FITS: 2017 MALIBU MODEL:
24MXZ – Max
Port/Starboard Specific
CTN 650lbs (295kg) - Silver / Scuderia
Size: 41”L X 20.5”W X 26.5”H
104.1cm L X 52cm W X 67.3cm H
SKU - MA 120
PUMPS & FLOAT
TELESCOPE PUMP
The reason why our setup can drain up to 3 times faster than any other system. Can only be used with an Eight.3 Ballast.
KEY FEATURES:
• Anti-airlock protection
• Won’t burn impeller if left on without water
• Stainless steel impeller shaft
• Rust and corrosion protection
• 12V DC cigarette power adapter with on/off toggle switch
SIZES
• 3700 GPH 20AMP Power Adapter
*Suggested for use on 2009 boats and newer
• 3000GPH 12AMP Power Adapter
*Suggested for use on 2009 boats and older
PUMP FLOAT
Prevent your new pump from being an ornament at the bottom of the lake with this float attached with a carabiner.
• Attach rope to hose near pump for best results
PLUG & PLAY PUMP
Can’t justify the price tag of the fastest pump out there? We now offer a 1200GPH ballast system pump.
KEY FEATURES:
• 1200GPH Pump
• 12V DC / 5AMP Fuse Power Source
• 15ft Long Power Cord
• 10ft long X 1” Diameter fill and drain hose
• Includes fill / drain adaptor that attaches to the top port of your Eight.3 PNP system
*Additional adapters are available if you have more than one PNP Ballast System
Can only be used on Eight.3 Ballast Systems
PUMP FLOAT
Prevent your new pump from being an ornament at the bottom of the lake with this float attached with a carabiner.
• Attach rope to hose near pump for best results
PLUG & PLAY
ADAPTOR KIT
Every boat is different, be sure to double check the Plug & Play plumbing of your boat before purchase.
VALVE PLUG
3/4” ELBOW QUICK CONNECT HOSE FITTING
This 3/4” elbow quick connector has a easy release system on one side that attaches to your Eight.3 ballast bag adapter. The other side has a hose barb fitting that clamps onto any boat’s 3/4” diameter internal Plug & Play pump hose system.
SKU# 177450
VALVE PLUG
Eight.3 1” port caps are all made with two sided vent slots which helps burp the bag of all extra air while filling, without taking off the cap completely, or potentially losing it - more water equals more weight. These 1” diameter port cap threads are twice as long, for a water tight fit.
SKU# 177500
*1” NPT THREAD - 3/4” QUICK CONNECT ADAPTOR
A 1” NPT thread adaptor to 3/4” quick connect that attaches to all Eight.3 ballast system port valves. This adapter attaches securely and water tight to the 3/4” elbow quick connect hose fittings.
SKU# 177460
*3/4” FEMALE NPT THREAD - 3/4” BARB FITTING
Designed for only certain
boat’s internal Plug & Play pumps.
SKU# 177465
1” ELBOW QUICK
CONNECTION HOSE FITTING
This 1” elbow quick connector has an easy release system on one side that attaches to your Eight.3 ballast bag adapter. The other side has a hose barb fitting that clamps onto any boat’s 1” to 1 1/8” diameter internal Plug & Play pump hose system.
SKU# 177430
1” FEMALE NPT THREAD - 1”BARB FITTING
Designed for only certain
boat’s internal Plug & Play pumps.
SKU# 177466
1” STRIAGHT QUICK
CONNECT HOSE FITTING
This 1” straight quick connector has an easy release system on one side that attaches to your Eight.3 ballast bag adapter. The other side has a hose barb fitting that clamps onto any boat’s 1” to 1 1/8” diameter internal Plug & Play pump hose system .
SKU# 177420
1” NPT THREAD 3/4” BARB FITTING
The 1” NPT thread will connect to any Eight.3 ballast port and clamps straight to your boats •” diameter Plug & Play hose.
SKU# 177464
*1” NPT THREAD - 1” QUICK CONNECTION ADAPTORS
A 1” NPT thread adaptor to 1” quick connect that attaches to all Eight.3 ballast system port valves. This adaptor attaches securely and water tight to both the 1” straight and 1” elbow quick connect hose fittings.
SKU# 177440
1” NPT THREAD 1”BARB FITTING
The 1” NPT thread will connect to any Eight.3 ballast system port and clamps straight to your boats
1”-1 1/8” diameter Plug & Play hose.
SKU# 177463
RUBBER FILL CAP
Replacement rubber fill cap for your telescope ballast system.
SKU# 177505
PLUG & PLAY PUMP BALLAST ADAPTOR
This adaptor fit’s in all Eight.3 PNP ballast systm top ports. For those needing more than one ballast system to create their perfect wave
SKU# 177510
EIGHT.3
The makers of the first compression molded waterski, wakeboard, wakeskate, and wakesurfer are proud to reveal our latest brand - Eight.3. From all of our years of making the finest watersports products - we saw a need to make boating simpler. To create a line of telescope systems that are faster and easier than anything on this planet. Along with developing a practical design, wake enhancing, accessory to help get more boats in the surf game without having to drill anything permanent into a hull.