VINYL NEW CONSTRUCTION WINDOWS

Montecito Series(continued)

Milgard Windows3 Part Vinyl Window Specification – Montecito Series Page 1 of 13

VINYL NEW CONSTRUCTION WINDOWS

Montecito Series(continued)

VINYL WINDOWS

PART 1 – GENERAL

1.01SUMMARY

  1. Section Includes: Tubular extruded poly vinyl chloride (PVC) windows of the following type(s):

Horizontal Sliding Window

Double Sliding Windows

Single-hung Windows

Double-hung Tilt Windows

Casement Windows

Awning Windows

Picture and Radius Windows

Fixed Casement Windows

Fixed Awning Windows

Bay Windows

Bow Windows

Garden Windows (Classic Series)

Jalousie Windows

B. Related Sections:

1. ______- ______.

2. ______- ______.

3.08 32 16 - Vinyl Sliding Doors.

C. Alternates:

1. Reference Section 01 23 00 – Alternates.

1.02SUBMITTALS

  1. Reference Section 01 33 00 – Submittal Procedures; submit following items:
  1. Product Data.
  1. Shop Drawings: Include window schedule, window elevations, sections and details, and multiple window assembly details.
  1. Samples:

a. Color samples: Minimum 1x4 inch (25x100 mm) samples of PVC with integral color.

b. Glass, showing specified tint color.

4. Quality Assurance/Control Submittals:

a. Qualifications: Proof of manufacturer's qualifications.

b. U-Factor and structural rating charts required for AAMA and NFRC labeling requirements.

c. Installation Instructions – AAMA 2400 (“Mounting Flange Installation”).

  1. Closeout Submittals: Reference Section 01 78 00 – Closeout Submittals; submit following items:
  1. Temporary window labels marked to identify windows that labels were applied to.
  1. Maintenance instructions.
  1. Special Warranties.

1.03 QUALITY ASSURANCE

  1. Overall Standards: Comply with ANSI/AAMA 101.I.S.2, except as otherwise noted herein.
  1. Qualifications:

1. Manufacturer Qualifications:

a. Minimum five years experience in producing vinyl windows of the type(s) specified.

  1. Member AAMA, NFRC.
  1. Regulatory Requirements:
  1. Certifications for insulated glass windows:
1.AAMA: Windows shall be Gold Label certified with label attached to frame per AAMA requirements.
2.NFRC: Windows shall be NFRC certified with temporary U-factor label applied to glass and an NFRC tab added to permanent AAMA frame label.

1.04 DELIVERY, STORAGE AND HANDLING

  1. Reference section 01 66 00 - Product Storage and Handling Requirements.
  1. Follow manufacturer’s instructions on label applied to windows.

1.05 WARRANTY

  1. Residential Special Warranty:
1.Lifetime guarantee to original owner.
2.Transferability:

a)Permit unlimited transfer of ownership in first ten years.

b)Upon first transfer of ownership, guarantee period shall become ten years from date of original purchase.

3.Guarantee windows against defect in materials and workmanship including costs for parts and labor.
  1. Commercial Special Warranty:
  1. 10-year guarantee.
  1. Guarantee windows against defects in manufacturing and workmanship including costs for parts and labor.

PART 2 – PRODUCTS

2.01 MANUFACTURER

  1. Milgard Manufacturing, Inc.Tel:1.800.MILGARD (645-4273)

1010 54th Avenue East(253) 922-2030

Tacoma, WA 98424 Fax:(253) 926-0848

Web:milgard.com

  1. Manufacturer’s Representative:

______Tel:______

______Fax:______

______Email:______

  1. Window Series: Milgard Montecito
  1. Substitutions: Reference Section 01 25 13 – Product Substitutions Procedures.

2.02 MATERIALS

A.Vinyl: Integral color PVC compound containing impact-resistant solid plasticizer, titanium dioxide UV inhibitor, and surface and color stabilizers.

1.Comply with ASTM D 4216 and ANSI/AAMA 101/I.S.2.

2.03GENERAL PERFORMANCE REQUIREMENTS:

  1. Thermal Performance: Comply with NFRC 100.
  1. Air Leakage, Water Resistance, Structural Test: Comply with ANSI/AAMA 101/I.S.2.
  1. Forced-Entry Resistance: Comply with ASTM E 588.

2.04WINDOW TYPES:

  1. Horizontal Slider - [8120M Series, 1-3/8 inch (35 mm) nail fin setback] [8130M Series, 1 inch (25 mm) nail fin setbackwith stucco key] [8140M Series, 1-3/8 inch (35 mm) nail fin setback, 2 inch (51 mm) long nail fin with optional [3/4 inch(19 mm) Flat J-channel] [1 inch (25 mm) Contoured J-channel] [2 inch (51 mm) Brickmold-style J-channel]]:

1. Frame: Minimum 3-1/4 inch (83 mm) deep, multi-chambered vinyl profile.

2. Sash: Minimum 1-1/4 inch (32 mm) deep, multi-chambered vinyl profile.

3. Sightlines: Equal for operating and fixed sash.

4. Performance Class:

a. 71-1/2" x 59-1/2" and smaller: HS-C40.

b. 71-1/2" x 71-1/2" to 71-1/2" x 59-1/2": HS-C35.

c. Larger than 71-1/2" x 71-1/2": HS-LC25.

5. Hardware:

a. Nylon rollers with stainless steel axles, extruded vinyl snap-on monorail roller track.

b. Dual pull rails.

c. SmartTouch™ direct action locking mechanism.

6. Weatherstripping: Fin Seal Polypropylene pile.

B.Double Slider - [8125M Series, 1-3/8 inch (35 mm) nail fin setback] [8125M Series, 1-3/8 inch (35 mm) nail fin setback withoptional [3/4 inch (19 mm) Flat J-channel] [1 inch (25 mm) Contoured J-channel] [2 inch (51 mm) Brickmold-style J-channel]]:

1. Frame: Minimum 3-1/4 inch (83 mm) deep, multi-chambered vinyl profile.

2. Sash: Minimum 1-3/16 inch (30 mm) deep, multi-chambered vinyl profile.

3. Sightlines: Equal for active and passive sashes.

4. Performance Class:

a. 71-1/2" x 59-1/2" and smaller: HS-LC25.

5. Hardware:

a. Nylon rollers with stainless steel axles, extruded vinyl snap-on monorail roller track.

b. Single pull rail on active sash.

c. SmartTouch™ direct action locking mechanism.

d. Passive sash friction catch.

6. Weatherstripping: Fin seal polypropylene pile.

C.Single Hung - [8220M Series, 1-3/8 inch (35 mm) nail fin setback] [8230M Series, 1 inch (25 mm) nail fin setback withstucco key] [8240M Series, 1-3/8 inch (35 mm) nail fin setback, 2 inch (51 mm) long nail fin with optional [3/4 inch (19mm) Flat J-channel] [1 inch (25 mm) Contoured J-channel] [2 inch (51 mm) Brickmold-style J-channel]]:

1. Frame: Minimum 3-1/4 inch (83 mm) deep, multi-chambered vinyl profile.

2. Sash: Minimum 1-1/4 inch (32mm) deep, multi-chambered vinyl profile. Includes vent stops located in fixed sash.

3. Sightlines: Equal for operating and fixed sash.

4. Performance Class:

a. 56" x 91": H-C40.

5. Hardware:

a. Concealed block and tackle balancer.

b. Dual pull rails (sash lifts).

c. SmartTouch™ direct action locking mechanism.

6. Weatherstripping: Fin seal polypropylene pile.

D. Double-Hung Tilt - [8225M Series, 1-3/8 inch (35 mm) nail fin setback] [8225M Series, 1-3/8 inch (35 mm) nail fin setbackwith optional [3/4 inch (19 mm) Flat J-channel] [1 inch (25 mm) Contoured J-channel] [2 inch (51 mm) Brickmold-styleJ-channel]]:

1. Frame: Minimum 3-1/4 inch (83 mm) deep, multi-chambered vinyl profile.

2. Sash: Minimum 1-3/16 inch (30 mm) deep, multi-chambered vinyl profile. Tilt-in upper and lower sash. Includes vent stops located in fixed sash.

3. Sightlines: Equal for lower and upper sashes.

4. Performance Class:

a. 44” x 75”: H-LC35.

b. 40” x 63”: H-R40.

5. Hardware:

a. Block and tackle balancer.

b. Dual pull rails (sash lift).

c. SmartTouch™ direct action locking mechanism.

d. Upper sash friction catch system.

6. Weatherstripping: Fin seal polypropylene pile.

E. Casement - [8520M Series, 1-3/8 inch (35 mm) nail fin setback] [8530M Series, 1 inch (25 mm) nail fin setback withstucco key] [8540M Series, 1-3/8 inch (35 mm) nail fin setback, 2 inch (51 mm) long nail fin with optional [3/4 inch (19mm) Flat J-channel] [1 inch (25 mm) Contoured J-channel] [2 inch (51 mm) Brickmold-style J-channel]]:

1. Frame: Minimum 3-1/4 inch (83 mm) deep, multi-chambered vinyl profile.

2. Sash: Minimum 2-5/8 inch (67 mm) deep, multi-chambered vinyl profile.

3. Performance Class:

a. 32” x 71-1/2”: C-C55.

b. 35-1/2” x 60”: C-C60.

4. Hardware:

a. [Dual stainless steel arm rotary operator with standard handle] [Dual stainless steel arm rotary operator withoptional fold-down handle].

b. Single lever, multi-point, locking mechanism.

c. Two bar adjustable stainless steel hinge.

5. Weatherstripping: Foam filled bulb (interior), flexible leaf (middle).

F. Awning – [8420M Series, 1-3/8 inch (35 mm) nail fin setback] [8430M Series, 1 inch (25 mm) nail fin setback with stucco key] [8440M Series, 1-3/8 inch (35 mm) nail fin setback, 2 inch (51 mm) long nail fin with optional [3/4 inch (19 mm)Flat J-channel] [1 inch (25 mm) Contoured J-channel] [2 inch (51 mm) Brickmold-style J-channel]]:

1. Frame: Minimum 3-1/4 inch (83 mm) deep, multi-chambered vinyl profile.

2. Sash: Minimum 2-5/8 inch (67 mm) deep, multi-chambered vinyl profile.

3. Performance Class:

a. 59-1/2" x 35-1/2" and smaller: AP-C40.

4. Hardware:

a. [Dual stainless steel arm rotary operator with standard handle] [Dual stainless steel arm rotary operator withoptional fold-down handle].

b. Dual lever locking mechanism.

c. Two bar stainless steel hinge.

5. Weatherstripping: Foam filled bulb (interior & exterior), flexible leaf (middle).

G. Picture and Radius – [8320M Series, 1-3/8 inch (35 mm) nail fin setback] [8330M Series, 1 inch (25 mm) nail fin setbackwith stucco key] [8340M Series, 1-3/8 inch (35 mm) nail fin setback, 2 inch (51 mm) long nail fin with optional [3/4 inch(19 mm) Flat J-channel] [1 inch (25 mm) Contoured J-channel] [2 inch (51 mm) Brickmold-style J-channel]]:

1. Frame: Minimum 3-1/4 inch (83 mm) deep, multi-chambered vinyl profile.

2. Sightlines: Equal to Horizontal Slider and Single Hung.

3. Performance Class:

a. 8320M, 8330M & 8340M Series, 95-1/2" x 71-1/2" and smaller: F-HC40.

b. 8370M & 8375M Series, 95-1/2" x 71-1/2" and smaller: F-HC45.

H. Fixed Casement – [8521M Series, 1-3/8 inch (35 mm) nail fin setback] [8531M Series, 1 inch (25 mm) nail fin setback withstucco key] [8541M Series, 1-3/8 inch (35 mm) nail fin setback, 2 inch (51 mm) long nail fin with optional [3/4 inch (19 mm)Flat J-channel] [1 inch (25 mm) Contoured J-channel] [2 inch (51 mm) Brickmold-style J-channel]]:

1. Frame: Minimum 3-1/4 inch (83 mm) deep, multi-chambered vinyl profile.

2. Sightlines: Equal to Casement Window.

3. Performance Class:

a. 83-1/2” x 71-1/2” and smaller: FW-HC55.

I. Fixed Awning – [8421M Series, 1-3/8 inch (35 mm) nail fin setback] [8431M Series, 1 inch (25 mm) nail fin setback withstucco key] [8441M Series, 1-3/8 inch (35 mm) nail fin setback, 2 inch (51 mm) long nail fin with optional [3/4 inch (19mm) Flat J-channel] [1 inch (25 mm) Contoured J-channel] [2 inch (51 mm) Brickmold-style J-channel]]:

1. Frame: Minimum 3-1/4 inch (83 mm) deep, multi-chambered vinyl profile.

2. Sightlines: Equal to Awning Window.

3. Performance Class:

a. 59-1/2” x 95-1/2” and smaller: AP-C40.

J. Bay Windows – [1-3/8 inch (35 mm) nail fin setback] [1 inch (25 mm) nail fin setback]:

1.Frame: Minimum 3-1/4 inch (83 mm) deep, multi-chambered vinyl profile.
2.Unit configuration and window types as shown on drawings; mulled together to form single window unit.
3.Assembly posts at 45 degrees.

K. Bow Windows – [1-3/8 inch (35 mm) nail fin setback] [1 inch (25 mm) nail fin setback]:

1. Frame: Minimum 3-1/4 inch (83 mm) deep, multi-chambered vinyl profile.

2. Unit configuration and window types as shown on drawings; mulled together to form single window unit.

3. Assembly posts at 13 degrees.

L. Garden Window – 5920 Classic™ Series, flush mount nail fin:

1. Frame: Minimum 2-13/16 inch (72 mm) deep, multi-chambered vinyl profile.

2. Performance Class:

a. 71-1/2" x 59-1/2" and smaller: GH-R25.

3. Fixed face and top with single-hung sides: mulled together to form single window unit.

4. Projection: 17-1/8 inches (435 mm).

M. Jalousie Window – (check your Milgard location for availability) - [8820M Series, 1-3/8 inch (35 mm) nail fin setback]:

1. Frame: Minimum 3-1/4 inch (83 mm) deep, multi-chambered vinyl profile.

2. Hardware:

a. Lever activated multi-blade tilt hardware.

b. 4-inch blades standard.

c. Louvre blade: [1/4” Glass] [Wood] [Cellular PVC].

3. Performance Class:

a. 36" x 75-1/2" and smaller: J-R20.

4. Weatherstripping: Flexible leaf at head and sill.

2.05GLAZING

A. Insulated Glass Units: ASTM E 774, Class A, 7/8 inch (22 mm) thick overall except Garden Window, Double Slider & Double Hung which are 3/4 inch (19mm) thick.

1. Glazing Type: [Clear/Clear] [Clear/SunCoat® Low-E] [Clear/SunCoat® Low-E, argon gas filled] [Clear/SunCoatMAX™ Low-E] [Clear/SunCoatMAX™ Low-E, argon gas filled] [Clear/Hardcoat Low-E] [Clear/Hardcoat Low-E, argon gas filled].

2. Spacer Bar: [Warm edge steel spacer] [Aluminum box spacer] [Warm edge foam spacer].

B. Single Pane Glass:

1. Glazing Type: [Clear] [Solar Bronze] [Solar Gray] [Hardcoat Low-E] [Solar Cool Bronze] [Solar Cool Gray].

2.06DIVIDED LITE GRIDS

A. [5/8 inch (16 mm) wide flat, grids between the glass that are color matched to frame and sash] [1-1/16 inch (27 mm) wide sculptured, grids between the glass that are color matched to frame and sash] [7/8 inch (22 mm) Vinyl Simulated Divided Lite (SDL) grids, applied to interior and exterior of insulated glass unit with flat grids within the airspace of the insulated glass unit]

2.07INSECT SCREENS

A. Provide tight-fitting screen for operating sash with hardware to allow easy removal.

1. Screen Cloth: Charcoal colored fiberglass mesh.

2. Frame:

a. Cambered formed aluminum with rigid plastic corner keys.

b. [Standard clear pull tabs for screen removal] [Optional roll formed integral pull rail for screen removal]

2.08FABRICATION

A. Fabricate frames and sash with mitered and fusion welded corners and joints. Trim and finish corners and welds to match adjacent surfaces.

B. Provide concealed metal reinforcements in sash frame for attaching lock mechanism.

C. Factory inside glaze (except Double-Hung, Double Slider and Garden Window) with snap-on PVC mitered glazing stops matching bevels on the sash and frame. Note: Field glazing is required for large window units (over 40sf (3.72 m2)). Insulating glass units shall be reglazable without dismantling sash framing.

2.09FINISHES

  1. Frame and Sash Color: [White] [Tan]
  1. Color match screen frame to window frame and sash color.

2.10 SOURCE QUALITY CONTROL

  1. Windows inspected in accordance with manufacturer’s Quality Control Program as required by AAMA Gold Label certification.

PART 3 - EXECUTION

3.01 EXAMINATION

A. Examine openings in which windows will be installed.

1. Verify that framing complies with AAMA 2400 (“Mounting Flange Installation”).

2. Verify that fasteners in framed walls are fully driven and will not interfere with window installation.

B. Coordinate with responsible entity to correct unsatisfactory conditions.

C. Commencement of work by installer is acceptance of substrate conditions.

3.02 INSTALLATION

  1. Install windows in framed walls in accordance with AAMA 2400 (“Mounting Flange Installation”).
  1. Do not remove temporary labels.
  1. Install insect screens on operable sash.

3.03 CLEANING

  1. Reference Section 01 74 00 – Cleaning and Waste Management.
  1. Remove temporary labels and retain for Closeout Submittals.
  1. Clean soiled surfaces and glass using a mild detergent and warm water solution with soft, clean cloths.

END OF SECTION

This specification was prepared by Milgard Manufacturing, Inc. Comments or suggestions for improvement should be addressed to Milgard at the address in Article 2.01 A.

Issue Date: October 31, 2007

Milgard Windows3 Part Vinyl Window Specification – Montecito Series Page 1 of 13