USB3.0 Upgrade Kit (PCI-E to USB3.0 3 Ports Host + USB3.0 All-In-One Card Reader)

BW-P3030A

USB3.0 Upgrade Kit (PCI-E to USB3.0 3 ports host + USB3.0 All-in-one card reader)

Use Manual

Patented Product

01.Introduction:

This is an Patented3.5’’ internal USB3.0 Host + USB3.0 Card Reader. It is placed in the Floppy position of computer case(it needs one free floppy position 3.5’’). This product is powered by big 4PIN female socket(need one free 4PIN male socket). Built-in PCI-E3.0 allows you to quickly add a 3 ports USB3.0 hub to your computer, without buying an extra USB 3.0 PCI-E card to upgrade your computer board from USB 2.0 to USB 3.0. Support USB 3.0 drive, high-resolution camera, Video surveillance camera, digital video camera and multi-channel audio, etc. It provides USB3.0 with super speed up to 5Gb/s. Also compatible with USB 2.0 and USB 1.1. Broway BW-P3030A can be used with wide range of USB devices, allowing multi USB3.0 devices and traditional USB devices to operate simultaneously. 6 slots USB3.0 all-in-one card reader can meet your daily demand of writing and reading all kinds of digital memory card. The build-in current protection system can effectively protect the device and Hub itself in the case of sudden electricity, to provide enhanced durability and reliability.

02.Patented Innovation：

The biggest characteristic of this product is to add the function of PCI-E, which upgrade PC USB to 3.0, into the traditional internal USB 3.0 host. Previous way of upgrading is to buy an extra internal PCI-E, ports added by which is not easy to use, when you find it is behind the PC box. Internal USB3.0 Combo is designed for end user’s demand and convenience. Only several simple steps, you can upgrade your PC USB, add more USB ports, read and write all memory cards you use daily, at the same time! BW-P0056A is the final solution to upgrade your PC.

Features：

1. Metal case, strong texture

2. DC big 4PIN socket supply power to each USB3.0 connector up to 900mA MAX, insure all your huge current consumption USB devices can work properly

3. Standard3.5" floppy size, easy to install. Can also be mounted to 5.25" 4. 3 ports USB 3.0 hub and 6 slots USB 3.0 card reader plug and play, easy and practical to use. Can read: Supper SD，Micro SD/TF, XD, MS , M2, CF. Support SDHC and SDXC.

5.

Build-in over current protection can protect the devices and host itself effectively 6. Support USB 3.0 to Sata interface, USB 3.0 with high speed up to 5.0Gb/s, backward with USB 2.0/1.1 7. Hot-swap

8. Build-in PCI-E, one step to upgrade to front access USB3.0!!

03.Specification

04.Accessories:

1. Upgrade Kit * 1
2. Screws * 1
3. User Manual *1
4. Driver Disk *1

05.Installation:

1. Verify the package contents.

1. Install into a 3.5” or 5.25” (need one panel) drive bay

1. Secure the front panel with screws provided and carefully connect the PCI-E card to the corresponding slots.

1. Plug the power to the appropriate port.

1. Once the computer is power on, proceed with installing the necessary driver.

1. You have completed the installation of the USB3.0 upgrade kit.

Notes

1. This product is not intended to throw and put in damp, direct sunlight and high temperature.
2. Damage to the case or loss of HDD data by misuse, demolishing casually or operation do not comply with instructions, the company will not take any compensation or maintenance responsibility.

Declaration

All information in this article are free to change by the manufacturer without notice, who has all rights of final interpretation of the product. Instruction manual is for reference only, no representation or guarantees of any content to be correct. Information contained here is for general use customers. All brand name and trademarks refer here are belong to their respective owners.