Unit 8
Unit Recording Sheet
This form should be completed by the centre assessor. Please enter specific page numbers where evidence can be found in the portfolio, or where electronic evidence is being submitted, the location of this.
One of these sheets should be attached to the assessed work of each candidate.
Unit Title / Optimise and maintain performance in engineering systems / Unit Code / H/615/2138 / Year / 2 / 0 / 1
Centre Name / Centre Number
Candidate Name / Candidate Number
GradingCriteria - The Learner can: / Grading Criteria achieved () / Teacher comment / Page No./Evidence location
Pass
The grading criteria are the Pass requirements for this unit.In order to achieve a Pass grade, all Pass criteria must be achieved.
Learning Outcome 1: Understand the importance of maintenance to optimise performance
P1:
Explain the reasons for maintenance and repair and the implications of not maintaining an engineering system or product
Learning Outcome 2: Be able to plan maintenance to optimise performance
P2:
Prepare a sequence of maintenance tasks as part of a scheduled maintenance plan
Learning Outcome 3: Be able to perform maintenance operations
P3:
Work safely to perform maintenance procedures and system checks using manufacturer’s instructions. Complete servicing and maintenance records
Learning Outcome 4: Be able to perform unscheduled repair procedures
P4:
Perform system tests to identify cause of system failure and perform repairs
GradingCriteria - The Learner can: / Grading Criteria achieved () / Teacher comment / Page No./Evidence location
Merit Criteria
The grading criteria are the Merit requirements for this unit.In order to achieve a Merit grade, all Merit criteria must be achieved and all Pass criteria must also have been achieved.
Learning Outcome 2: Be able to plan maintenance to optimise performance
M1:
Use data to produce a scheduled maintenance plan to maintain or improve system reliability
Learning Outcome 3: Be able to perform maintenance operations
M2:
Perform inspection and replacement of serviceable items using manuals, making adjustments where necessary
Learning Outcome 4: Be able to perform unscheduled repair procedures
M3:
Analyse the cause of a premature failure in an electrical, mechanical or fluid power system.
GradingCriteria - The Learner can: / Grading Criteria achieved () / Teacher comment / Page No./Evidence location
Distinction Criteria
The grading criteria are the Distinction requirements for this unit.In order to achieve a Distinction grade, all Distinction criteria must be achieved and all Merit and Pass criteria must also have been achieved.
Learning Outcome 2:Be able to plan maintenance to optimise performance
D1:
Use calculations to determine reliability of systems or components to inform a maintenance strategy
Learning Outcome 3:Be able to perform maintenance operations
D2:
Use diagnostic equipment to obtain data to confirm expected values. Provide advice on serviceable items requiring attention and any changes in maintenance frequency
OVERALL GRADE (P,M or D)
I confirm that:
- the candidate’s work is solely that of the candidate concerned and was conducted under the required conditions as laid down in the qualification handbook;
- internal standardisation has been carried out and that all grades have been correctly recorded and accurately transcribed to the claim being submitted to OCR.
Completed by: / Date :
Please note:This form may be updated on an annual basis. The current version of this form will be available on the OCR website (
Version 1H/615/2138/URS
Oxford Cambridge and RSA Examinations