Top DAUG Finals Contest

2008 AUGI Top DAUG Finals

1.  Reset the drawing timer

2.  Draw a closed polyline

a.  Start the polyline at 0,0, having a starting and ending width of 0 units.

b.  Draw a 7 unit horizontal line segment at 0 degrees.

c.  Draw an arc segment with an angle of -180, and an endpoint 2 units and 0 degrees from the end of the previous line.

d.  Draw a 3 unit horizontal line segment at 0 degrees.

e.  Draw a 5 unit vertical line segment at 90 degrees, having an ending width of 0.25 units.

f.  Draw a 7 unit horizontal line segment at 180 degrees.

g.  Draw an arc segment with an angle of -180, and an endpoint 2 units and 180 degrees from the end of the previous line.

h.  Draw a 3 unit horizontal line segment at 180 degrees.

i.  Close the polyline with a line segment that ends with a width of 0 units.

3.  Mirror the shape

a.  Mirror the polyline along a horizontal axis. The first point of the mirror line should be at the last point specified when closing the polyline.

b.  Do not erase original polyline.

4.  Create a new layer

a.  Create a layer named “AUGI” with a color of Red (1).

b.  Set it as the current layer.

5.  Create a text style

a.  Create a text style named “Vegas”, using font “ariblk.ttf”. Accept all other defaults.

6.  Add Mtext

a.  Place a piece of MText with the first corner coordinate 0,5, with an opposite corner at 12,0.

i. Style: Vegas

ii.  Justification: MiddleCenter

iii.  Height: .75 units

iv.  Contents: “I am a Top DAUG!”

v.  Change its color to Yellow (2).

7.  Create a block

a.  Create a block from all the objects created so far. Block name: “AU2008”. Insertion point: 0,0.

b.  Insert the block at 0,0, with a scale of 1 and rotation of 0.

8.  Create an Array

a.  Array the block created above.

i. Rows: 3

ii.  Row spacing: 10 units

iii.  Columns: 3

iv.  Column spacing: 12 units

9.  Zoom Extents

10.  Display elapsed time on the command line.