PURCHASE SPECIFICATION

title: CONNECTOR, MICRO USB, 2.45mm, FL, 1.8A, BLK, 1X5, 0.65mm, 90D, SMD, TR, LCP, G/F

Proprietary Note:

The document is confidential and proprietary, and is the property of Inventec Corporation. It is an unpublished work protected under applicable copyright laws. Don’t reproduce, copy, distribute or use in whole or in part as the basis for the manufacture or sale of items without the written approval of the document owner. Copyright © 2014 Inventec Corporation.

Default Tolerance: Unless otherwise specified, dimensions are in:

Inches: tolerance specified on drawings
Inches: one place0.1, two places0.02, three places0.005, fractional inches1/64
V / Millimeters: tolerance specified on drawings
Millimeters: from 0~50.1,from 5~300.2, from 30~1000.3, from 100~3000.4, from 300~10000.6, >10001.0
Millimeters: from 0~50.3,from 5~300.4, from 30~1000.6, from 100~3001.0, from 300~10001.6, >10002.5

Current Document Revision History:

Responsible Engineer / RD Manage / CE / Technical Writer / Eng. Change Order / Doc Rev. / Approval Date
Cate Wu / Paul Wu / Jack shen / Initial / A / 2014/07/29
Inventec Part Number / Rev / Inventec Part Number / Rev / Inventec Part Number / Rev
6012B0639401 / A01

1 Scope:

This specification defines the detail requirements for a MICRO USB connector.

2 Applicable Documents: (Per latest revision on date of order)

Inventec Hazardous Substance Free (HSF) Management Standard

3 Requirements:

3.1 Mechanical:

 Configuration/Dimensions: Per Figure A

 Recommend Pad Layout: Per Figure B

Item / Requirements / Specification
Mating (Insertion) Force / Speed rate: 12.5mm/minute
EIA-364-13 / 35N (3.57kgf) maximum
Un-mating (Extraction) Force / Speed rate: 12.5mm/minute
EIA-364-13 / 8N (0.82kgf) minimum
25N (2.58kgf) maximum
Terminal/Housing Retention Force / -- / --
Pull Out Force (Overload)
(Only for RJ45) / -- / 10kgf minimum
Torque Force of Screwing / -- / 2.0kgf minimum
No damage
Housing or Shell Material / -- / LCP UL94V-0 (Black)
Pins Coplanarity / -- / 0.1mm maximum
Vibration / Mate plugs and subject to the
following vibration conditions:
Random Vibration
3 mutually perpendicularly.
10~2000Hz, 0.02G2/Hz
20 minutes per plane
EIA-364-28 / Appearance: No Damage
Contact Resistance: ΔR =10mΩ
Maximum
Discontinuity: 1 microsecond
maximum
Shock / Mate plugs and subject to the
following shock conditions, 3
shocks shall be applied along 3
mutually perpendicular axes,
passing DC 100mA current during
the test. (Total of 18 shocks)
Test Pulse : Half Sine
Peak Value: 30G
Duration: 11 ms
EIA-364-27 / Appearance: No Damage
Contact Resistance: ΔR =10mΩ
Maximum
Discontinuity: 1 microsecond
maximum
3.2 Electrical:
Item / Requirements / Specification
Rated Voltage / -- / 30V AC maximum
Rated Current / -- / Signal (Pins 2,3,4): 1.0A
Power (Pins 1,5): 1.8 A
Contact Resistance / Test voltage: 20mV maximum
Test current: 100mA maximum
EIA-364-23 / 30mΩ maximum
Insulation Resistance / Test voltage: 100V DC
EIA-364-21 / 1000MΩ minimum
Dielectric Withstanding Voltage / Test voltage: 100V AC
Duration: 1 minute
EIA-364-20 / No breakdown.
3.3 Environmental:
Item / Requirements / Specification
Life Cycle (Durability) / 5000 times minimum / --
Solderability / -- / More than 95% of immersed area shall be covered with solder.
Resistance to Soldering Heat (IR Reflow) / Peak: 260±5°C for 10 seconds / --
Solder Area & Shell / -- / Bright tin plating is prohibited
Contact Plating and Thickness / -- / Gold Flash
Plastic Part / -- / PA46 is not recommended unless damp-proof package is enhanced and drier is put inside.
Operating Temperature / -- / --
Storage Temperature / -- / -40°C to +85°C
High Temperature / -- / --
Low Temperature / -- / --
Thermal Shock / 10 cycles
Temperature:
-55°C± 3°C 30 minutes.
+85 ± 2°C 30 minutes.
EIA-364-32C / Appearance: No Damage
Contact Resistance: ΔR =10mΩ
Maximum
Insulation Resistance: 1000 MΩ minimum
Dielectric Withstanding Voltage: No breakdown
Steady State Humidity / Mate connectors and expose to
humidity in 7 cycles 7 clause. Upon
completion of the exposure period,
the test specimens shall be
conditioned at ambient room
conditions for 1 to 2 hours, after
which the specified measurements
shall be performed.
EIA-364-31 method III / Appearance: No Damage
Contact Resistance: ΔR =10mΩ
Maximum
Insulation Resistance: 1000 MΩ minimum
Dielectric Withstanding Voltage: No breakdown
Salt Spray Test / Salt solution: 5±1%
Temperature: 35±2°C
Duration: 48± 4 hours
EIA-364-26 / Appearance: No Damage
Contact Resistance: ΔR =10mΩ
Maximum
Temperature Life / Temperature: 105±2°C
Duration: 250 hours
EIA-364-17B / Appearance: No Damage
Contact Resistance: ΔR =10mΩ
Maximum
Insulation Resistance: 1000 MΩ minimum
Dielectric Withstanding Voltage: No breakdown
3.4 Hazardous Substance Restriction:

This part complies with Inventec Hazardous Substance Free (HSF) Management Standard.

HSF Property: comply with Inventec PDM or iSupplier system HSF property attribute up-to-date value.

3.5 Marking:

As a minimum, item shall be marked on device or container with the Inventec (IEC) part number, revision, and the supplier name, symbol, or manufacturer’s part number.

3.6 Workmanship:

The item shall be uniform in quality and free from defects that adversely affect life, serviceability, performance, or appearance.

3.7 Packaging and Shipping:

Item shall be properly packaged for protection against damage during handling, transit, and storage. Minimum marking data on container shall include Inventec part number, revision, the supplier name or symbol, supplier part number, date code, Purchase Order number and quantity.

4 Quality Assurance Provisions:

Item submitted for approval shall be representative of the supplier normal production. Approval will be granted after the items have been examined, tested and found to meet the requirements of this specification. And the shipment must be the same as the items submitted for approval.

5 Reference Document:

Reference documents are for information purposes only and do not constitute a binding requirement of this specification.

Refer to “MICRO USB Connector Product Specification” information.

H/W, F/W Code Information: Refer to PDM system "Part's H/W, F/W Code Data" or II Index

All brands, names, trademarks and logos are the property of their respective owners.

/ Size / Mnemonic / Base Number / Variable / Reference / Doc Rev.
A / PS / 6012B06394 / 0 / 0 / A
PAGE 1 OF 8

All dimensions are in millimeters.

Figure A

Configuration/Dimensions

All dimensions are in millimeters.

Figure B

Recommended Pad Layout

Figure C

Recommended Soldering Profile

All dimensions are in millimeters.

Figure D

Packaging Drawings

/ Size / Mnemonic / Base Number / Variable / Reference / Doc Rev.
A / PS / 6012B06394 / 0 / 0 / A
PAGE 1 OF 8