This Form Must Be Filled out by the MANUFACTURER of Paint and Varnish

This Form Must Be Filled out by the MANUFACTURER of Paint and Varnish

VERSION: 1.0
In acc. with the requirements of BREEAM-NOR version 1.0 (14.03.2012)
Paint and Varnish / Self-declaration that the named products comply with the requirements for paint and varnish as per BREEAM-NOR’s chapter HEA 9

This form must be filled out by the MANUFACTURER of paint and varnish.

It is important that the information given here is correct, and we strongly encourage thoroughness in researching the extent to which emission testing and/or test reports show that the product complies with the standards and emission limit values required by BREEAM-NOR. If in doubt, the manufacturer should consult own internal and external experts. Providing incorrect and misleading information can have legal consequences.

Once filled-out, the form must be signed by a legally responsible person for the manifacturer, such as a technical director or a managing director.

EU’s Paints Directive (2004/42/CE) uses the following classification of paint and varnish.We kindly ask you to use the same subcategories (a, b, c, l) in column 2 in the table where the product information is declared.

a)Interior matt walls and ceilings (Gloss <25@60°) / b)Interior glossy walls and ceilings (Gloss >25@60°)
c)Exterior walls of mineral substrate / d)Interior/exterior trim and cladding paints for wood and metal
e)Interior/exterior trim varnishes and woodstains, including opaque woodstains / f)Interior and exterior minimal build woodstains
g)Primers / h)Binding primers
i)One-pack performance coatings / j)Two-pack reactive performance coatings for specific end use such as floors
k)Multi-coloured coatings / l)Decorative effect coatings

You can find more information about what distinguishes the different categories here:

MANUFACTURERS:
DECLARATION OF PRODUCT INFORMATION
Product trade name / Type (as per the table above) / VOC-contents (g/L) / Waterbased (
WB) or solventbased (SB) / VOC-emissions after 3 nychthemera (mg/m2h or mg/m3). Concerns onlypaintcategories a) and b)! / Nordic Ecolabel or EU Ecolabel (Yes/No)

Rows can be added or removed if needed

PRODUCT ID:
Add the product ID to the list to the right or send it to: / Download a product-list template
YES / NEI / Comments
1. / The emission testing of paint has been carried out in acc. with ISO 16000-9 or ISO 16000-10, and the declared emissions have been measured after 3 nychthemera.
2. / The paint/varnish complies with the VOC-directive: Directive 2004/42/CE
3. / Preservatives have been added to the paint to ensure that it does not spoil in the box.
Legally responisble: / Position: / Date:
Signature:
This form is developed by NCC in cooperation with Skanska. It is freely distributed via ProductXchange. Users of the form are solely responsible for ensuring that the version and contents of the form are correct. Neither NCCnor Skanska, nor ProductXchange can be held responsible for any possible errors. Filled-out forms are not an official approval from NCC, Skanska or ProductXchange.

Page1of2