Automated Peening / Electrical Discharge Machining
Manual Peening / Electro-Chemical-Drilling
Flapper Peening / Laser Cutting and Drilling
Peen Forming
The NMSETask Group covers the following processes:
Notice 1: All times are approximate and subject to change. Please contact PRI for updated information.
Notice 2: At the beginning of each day and after each break, the meeting will start with Opening Comments consisting of: Call to Order/Quorum Check, Introductions (as needed), Routing of the Attendance List (as needed)
Notice 3: Please bring your agenda with you to the meeting. Copies will not be available on-site.
Best Practices: 1) Start all meetings on time. 2) Follow the agenda. 3) No long-winded discussions
Caution: Export Controlled (e.g. ITAR, EAR) material is prohibited from presentations. It is the responsibility of the presenter to ensure that this material is not included.
Meeting Objectives:
- (Select and initiate work on new checklists for NM)
- (Select and intiate work on a new checklist for SE)
C. (Review performance of NMSE group activities)
NMSE Task Group Meeting Agenda FEBRUARY 2014
Closed Meeting in ALL CAPS
Monday, February 24, 2014
8:00 am
1.0 Opening Comments – NM Section
1.1 Call to Order
1.2 Quorum Check (voting members)
1.3 Code of Ethics/Antitrust and Meeting Conduct Movie
1.4 NMSE Vision Statement
1.5 Acceptance of Meeting Minutes
1.6 Review Days Agenda
8:15 am
2.0 Membership Status - NM
8:30 am
3.0 NM Checklists
9:00– 9:15 am
Break
9:15 am
4.0 NM Auditor Consistency Report
10:15 am
5.0 Laser Marking checklist
11:15 am
6.0 SEG Checklist
12:00 – 1:00 pm
Lunch Break
1:00 pm
7.0 Fiber optics
1:45 pm
8.0 PECM checklist
2:30 pm
9.0 Standardized coupon
3:00– 3:15 pm
Break
3:15 pm
10.0 AWJ checklist
4:15 pm
11.0 New NM Business
4:45 pm
ADJOURNMENT
Tuesday, February 25, 2014
9:00 am – 10:00 am
Supplier Orientation & Tutorial – An introduction and overview of the Nadcap program
9:00 am
12.0 OPENING COMMENTS
12.1 CALL TO ORDER
12.2 QUOUM CHECK
12.3 Code of Ethics/Antitrust and Meeting Conduct
9:15 am
13.0 COMBINED METRICS
10:00– 10:15 am
Break
10:15 am
14.0 COMBINED METRICS - Continued
11:00 am
15.0 REVIEW OF NMSE SUPPLIER COMMENTS
12:00 – 1:00 pm
Lunch Break
1:00 pm
16.0 SUCCESSION TRAINING AND PLANNING
1:15 pm
17.0 REVIEW OF OBSERVATION AUDITS
2:30-3:00 pm
Break
3:00 pm
18.0 TOP 10 FINDING DISCUSSIONS- NMSE
4:15 pm
19.0 NEW BUSINESS – Closed Meeting
4:45 pm
ADJOURNMENT
5:00 pm – 7:00 pm
Supplier Support Committee Meeting - All suppliers are encouraged to attend.
WenDsday, February 26, 2014
8:00 am
20.0 Opening Comments – SE Section
20.1 Call to Order
20.2 Quorum Check (voting members)
20.3 Code of Ethics/Antitrust and Meeting Conduct Movie
20.4 NMSE Vision Statement
20.5 Review Days Agenda
8:15 am
21.0 RAIL Review - NMSE
8:45 am
22.0 Membership Status - SE
9:15– 9:30 am
Break
10:00 am
23.0 SE Checklists
10:45 am
24.0 SE Auditor Consistency Report
12:00 – 1:00 pm
LUNCH BREAK
1:00 pm
25.0 Opening Comments
25.1 Call to Order/Quorum Check
25.2 Code of Ethics/Antitrust and Meeting Conduct
25.3 Review Agenda
1:15 pm
26.0 Auditor Handbook - SE
3:00– 3:15 pm
Break
3:15 pm
27.0 Auditor Handbook - SE
4:00 pm
28.0 Audit scheduling – days required- NMSE
4:30
ADJOURNMENT
5:00 pm – 7:00 pm
Planning & Ops – Task Group Chairs and Staff Engineers are required to attend.
Thursday, February 27, 2014
9:00 am – 11:00 am
Nadcap Management Council Meeting – All members are encouraged to attend this informative and important meeting.
11:00 am
29.0 Opening Comments
29.1 Call to Order/
29.2 Quorum Check
29.3 Code of Ethics/Antitrust and Meeting Conduct
11:15 am
30.0 Job Audit Policy
12:00 – 1:00 pm
Lunch Break
1:00 pm
31.0 Presentations
2:00 pm
32.0 NTGOP Ballot status
2:30 pm
33.0 Action item review
3:30 pm
34.0 June Meeting Agenda Planning
4:00 pm
35.0 New Business
4:30 pm
ADJOURNMENT
NMSE Task Group Meeting Agenda FEBRUARY 2014
Monday, February 24, 2014
8:00 am / OPEN / 1.0 Opening Comments – NM Section1.1831 Call to Order
1.1832 Quorum Check (voting members)
· Introductions
1.1833 Code of Ethics/Antitrust and Meeting Conduct Movie
1.1834 NMSE Vision Statement
1.1835 Acceptance of Meeting Minutes
1.1836 Review Days Agenda / Alex Pohoata
8:15 am / 2.0 Membership Status - NM
· Presentation to review Task Group Membership Status / Brian Manty
8:30 am / 3.0 NM Checklists
· Review/discuss Auditor comments on NM checklists
· Checklist ballot results (if conducted) / Brian Manty
9:00– 9:15 am / Break
9:15 am / OPEN / 4.0 NM Auditor Consistency Report
· Presentation includes Top NCR Findings & Red-Line Report / Brian Manty
10:15 am / 5.0 Laser Marking checklist
· Working session on AC7116/6, Laser marking / Alex Pohoata
11:15 am / 6.0 SEG Checklist
· Working session on AC7116/5, Spark erosion grinding / Nouman Usmani
12:00 – 1:00 pm / Lunch Break
1:00 pm / OPEN / 7.0 Fiber optics
· Working session on Fiber optics / Alex Pohoata
1:45 pm / 8.0 PECM checklist
· Working session on Pulsed/Precise ECM / Alex Pohoata
2:30 pm / 9.0 Standardized coupon
· (Topic Description) / Alex Pohoata
3:00– 3:15 pm / Break
3:15 pm / 10.0 AWJ checklist
· Develop NM checklist in working session / Brian Manty
4:15 pm / 11.0 New NM Business / Alex Pohoata
4:45 pm / ADJOURNMENT
Tuesday, February 25, 2014
9:00 am – 10:00 am / Supplier Orientation & Tutorial – An introduction and overview of the Nadcap program9:00 am / CLOSED / 12.0 OPENING COMMENTS
12.1831 CALL TO ORDER
12.1832 QUOUM CHECK
· Verify only Subscriber Members are in attendance
· Introductions
12.1833 Code of Ethics/Antitrust and Meeting Conduct / Alex Pohoata
9:15 am / 13.0 COMBINED METRICS
· NM and SE Metrics / Brian Manty
10:00– 10:15 am / Break
10:15 am / CLOSED / 14.0 COMBINED METRICS - Continued
· NM and SE Metrics / Brian Manty
11:00 am / 15.0 REVIEW OF NMSE SUPPLIER COMMENTS
· Comments from the auditor evaluation from eAuditNet / Brian Manty
12:00 – 1:00 pm / Lunch Break
1:00 pm / 16.0 SUCCESSION TRAINING AND PLANNING
· Succession expectations from the NMC and develop succession plan / Brian Manty
1:15 pm / 17.0 REVIEW OF OBSERVATION AUDITS
· Review of Task Group Observations during this period
· NOP-012 Milestone plan / Brian Manty
2:30-3:00 pm / Break
3:00 pm / 18.0 TOP 10 FINDING DISCUSSIONS- NMSE / Brian Manty
4:15 pm / 19.0 NEW BUSINESS – Closed Meeting
· New Topics and issues of the day
4:45 pm / ADJOURNMENT
5:00 pm – 7:00 pm / Supplier Support Committee Meeting - All suppliers are encouraged to attend.
WenDsday, February 26, 2014
8:00 am / OPEN / 20.0 Opening Comments – SE Section20.1831 Call to Order
20.1832 Quorum Check (voting members)
· Introductions
20.1833 Code of Ethics/Antitrust and Meeting Conduct Movie
20.1834 NMSE Vision Statement
20.1835 Review Days Agenda / Alex Pohoata
8:15 am / 21.0 RAIL Review - NMSE
· Review of NMSE Rail items / Brian Manty
8:45 am / 22.0 Membership Status - SE
· Presentation to review Task Group Membership Status / Brian Manty
9:15– 9:30 am / Break
10:00 am / 23.0 SE Checklists
· Review/discuss Auditor comments on SE checklist
· Checklist ballot status / Brian Manty
10:45 am / 24.0 SE Auditor Consistency Report
· Presentation includes Top NCR Findings & Red-Line Report / Brian Manty
12:00 – 1:00 pm / LUNCH BREAK
1:00 pm / OPEN / 25.0 Opening Comments
25.1831 Call to Order/Quorum Check
· Introductions
25.1832 Code of Ethics/Antitrust and Meeting Conduct
25.1833 Review Agenda / Alex Pohoata
1:15 pm / 26.0 Auditor Handbook - SE
· Working session to update auditor handbook / Alex Pohoata
3:00– 3:15 pm / Break
3:15 pm / 27.0 Auditor Handbook - SE
· Continue discussion / Brian Manty
4:00 pm / 28.0 Audit scheduling – days required- NMSE
· sfrm16 - Nadcap Audit Grading Criteria / Brian Manty
4:30 / ADJOURNMENT / Alex Pohoata
5:00 pm – 7:00 pm / Planning & Ops – Task Group Chairs and Staff Engineers are required to attend.
Thursday, February 27, 2014
9:00 am – 11:00 am / Nadcap Management Council Meeting – All members are encouraged to attend this informative and important meeting.11:00 am / OPEN / 29.0 Opening Comments
29.1831 Call to Order/
29.1832 Quorum Check
· Introductions
29.1833 Code of Ethics/Antitrust and Meeting Conduct / Alex Pohoata
11:15 am / 30.0 Job Audit Policy
· Working session to re-write Job audit policy/guideline / Brian Manty
12:00 – 1:00 pm / Lunch Break
1:00 pm / OPEN / 31.0 Presentations
· SE Auditor Advisory
· AMS2432 Almen strip requirement / Alex Pohoata/ Brian Manty
2:00 pm / 32.0 NTGOP Ballot status
· Review of NMSE Ballot status / Brian Manty
2:30 pm / 33.0 Action item review / Dave McCallister
3:30 pm / 34.0 June Meeting Agenda Planning
· Develop Agenda / Brian Manty
4:00 pm / 35.0 New Business
· Discuss any new SE business / Alex Pohoata
4:30 pm / ADJOURNMENT / Alex Pohoata