The LNM Institute of Information Technology, Jaipur
(Deemed University)
TENDER NOTICE
Sealed tenders are invited for the supply of sensors for the development of ABS Laboratory as per the specifications given below in the document. You can submit your sealed offer at the following address by Speed-post/Registered Post/By-hand (but not by Courier) before 30 September 2017
Technical and commercial bids shall be submitted to the undersigned before the time and date given below:
Finance & Purchase Officer
The LNM Institute of Information Technology,
Gram – Rupa Ki Nangal, Post – Sumel,
Via – Jamdoli, Jaipur- 302031
Phone: 0141 5191733, Fax: 0141 5189214
Email:
Technical bid shall include (sealed in separate envelope):
a) Specifications :
Financial bid shall include (sealed in separate envelope): prices of all material and labour involved in the work as given in the attached financial bid (Bill of Quantity), including all expenses. Prices shall be FOR SITE and inclusive of all taxes, loading & unloading etc. Nothing extra shall be paid for any item other than the quoted prices.
b) Last Date of Submission : 30 September 2017
Description and scope of work:
Development of ABS System in Automotive Electronics lab the Department of Mechanical-Mechatronics Engineering. Scope of this lab is to demonstrate the working principle of ABS for final year B. Tech students.
BILL OF QUANTITY
Technical Bid
A) Automotive Sensors for ABS System
Sr.No / Name of product / Specifications1. / Wheel speed Sensor with trigger wheel
(Qty:4) / · Power Supply: 5v12v
· Reverse Supply: 5v-12v(negative)
· Supply Current :8mA(max)
· Timing Accuracy: 3%
· Output:12V(digital)
· Hall Effect’s Sensor
· Can measure upto :6000 RPM
· Air gap limit :1mm(max)
· Pin details should be provided
· Trigger wheel dimension should be provided
· Filter design detail should be provided
· RoHS compliant
· Sensitivity variation:3%
· SPI interface
2. / Accelero sensor
(Qty:1) / · Measurement: ±10g
· 4mg resolution at 50Hz bandwidth
· SPI interface
· Full self-test capability
· RoHS compliant
· Supply voltage:5v-12v
· Current consumption:7.5mA(max)
· Sensitivity variation:3%
· Pin details should be provided
· Filter design detail should be provided
· Seismic type
Note: 1. The vendor should provide the list of Automotive Companies and their vehicle models where these sensors are supplied.
2. A complete technical specification with catalogue should be provided.
Financial Bid
Automotive Sensors for ABS System
Sr.No / Name of product / Qty / Rate / Amount1. / Wheel speed Sensor with trigger wheel / 4 Nos.
2. / Accelero sensor / 1 Nos.
Prices shall be FOR SITE and inclusive of all taxes, loading & unloading etc. Nothing extra shall be paid for any item other than the quoted prices.