AC7119/4 Printed Board Personnel Qualification
AC7120 Circuit Card Assemblies / AC7120/1 Printed Board Assemblies Personnel Qualifications
AC7120/2 General Soldering of Circuit Card Assemblies
AC7120/3 Plated Through-Hole Technology (PTH)
AC7120/4 Surface Mount Technology (SMT)
AC7120/5 Mixed Metallurgy BGAs
AC7120/6 Lead Free Soldering
AC7120/7 Conformal Coating of Circuit Card Assemblies
AC7120/8 Encapsulation
AC7120/9 Programming
AC7120/10 Final Testing
AC7120/11 Repackaging
AC7121 Cable & Harness Assemblies / AC7121/1 Cable & Harness Asssemblies Personnel Qualifications
The Electronics Task Group (ETG) covers the following processes:
Notice 1:All times are approximate and subject to change. Please contact PRI for updated information.
Notice 2:At the beginning of each day, the meeting will start with Opening Comments consisting of: Call to Order, Verbal Quorum Check, Introductions (as needed), Routing of the Attendance List (as needed)
Notice 3:Please bring your agenda with you to the meeting. Copies will not be available on-site.
Best Practices: 1) Start all meetings on time. 2) Follow the agenda. 3) No long-winded discussions
Caution: Restricted Export Controlled (e.g. ITAR, EAR) material is prohibited from presentations. It is the responsibility of the presenter to ensure that this material is not included.
Presentations should not contain proprietary information without the approval of the organization which owns the information.
Any non-Nadcap agenda topics require approval by the Director, Nadcap Program and Aerospace Operations.
RECORDING POLICY:
Audio or video recording of Nadcap meetings is prohibited unless formal approval is received from all attendees and recorded in the minutes. Violators of this policy will be asked to stop recording. Failure to stop recording or repeated attempts to record may result in expulsion from the meeting and/or the Nadcap program.
ELECTRONICSTask Group (ETG) Meeting AgendaFebruary 2018
Closed Meeting in ALL CAPS
Monday, 19-Feb-2018
9:00 am – 10:00 am
Supplier Support Committee Leadership Team Opening Reception
10:00 am – 1:00 pm
New Supplier Information Session – New Suppliers are encouraged to attend, and all Suppliers are welcome
9:00 am
1.0OPENING COMMENTS (DAILY)
9:15 am
2.0REVIEW DELEGATION STATUS
9:30 am
3.0REVIEW OF FAILURE CRITERIA
10:00 am
4.0MISC AUDITOR INFORMATION
1:00 – 2:00 pm
LUNCH BREAK
2:00 pm
1.0Opening Comments (daily)
2:10 pm
5.0SUBSCRIBER DISCUSSION
4:15 pm
6.0PRESENTATION MATERIAL (AS NECESSARY)
4:30 pm
7.0SUPPLIER ONE-ON-ONE WITH TASK GROUP (INVITATION ONLY)
6:00 pm
ADJOURNMENT
Tuesday, 20-Feb-2018
9:00 am
1.0Opening Comments (daily)
1.1Call to Order/Quorum Check
1.2Safety Information:
1.3Review Code of Ethics (Ref: Attendees’ Guide) and Meeting Conduct
9:30 am
8.0Review and/or Accept
8.1Review Agenda
8.2Acceptance of Previous Meeting Minutes
8.3Status of Ballots (as applicable)
8.4Audit Observations Status (OP 1118)
8.5RAIL
8.6Call for New Business
11:00 am
9.0Supplier Support Committee (SSC) Meeting Notification
11:30 am
10.0Review Sub-Team listing
12:00 PM
11.0Failure Criteria
1:00 – 2:00 pm
Lunch Break
2:00 pm
1.0Opening Comments (daily)
2:15 pm
12.0Comment Resolution for any ballot and b-form resolution
4:30 pm
ADJOURNMENT
5:00 pm – 7:00 pm
Supplier Support Committee Meeting – All suppliers are encouraged to attend.
Wednesday, 21-Feb-2018
9:00 am
1.0Opening Comments (daily)
1.1Call to Order/Quorum Check
9:15 am
13.0Presentations (Report-outs)
14.1Gold Removal Presentation
14.2Subscriber findings
14.3CAAP Update
14.4MTL checklist review (microsection Lab)
10:00 am
14.0Breakout Sessions and Thursday Morning
14.1AC7119/5 or Handbooks
14.2Depaneling (AC7120/12)
14.3AC7120 vs. J-STD-001G and other slash sheets
14.4AC7121 Handbook and Rev to checklist
14.5Update /11 handbook to use IEC paragraphs as source data
14.6Alternate – IPC 1601A
14.7IPC 4552A
14.8Microsection
14.9ETG welcome packgage for new Suppliers
1:00 – 2:00 pm
Lunch Break
2:00 pm
14.0Breakout Sessions and Thursday Morning - continued
3:45 pm
14.0Breakout Session Report Out
4:30 pm
ADJOURNMENT
5:00 pm – 7:00 pm
NMC Planning & Ops Meeting – Task Group Chairs & Staff Engineers are required to attend.
Thursday, 22-Feb-2018
9:00 am – 11:00 am
Nadcap Management Council Meeting – All members are encouraged to attend this informative and important meeting.
11:20 am
1.0Opening Comments (daily)
1.1Call to Order/Quorum Check
11:30 am
15.0Checklist Revision Handbook Update – Working Sessions Continued…
1:00 – 2:00 pm
Lunch Break
2:00 pm
16.0Checklist Revision Handbook Report Out
2:45 pm
17.0Voting Member Updates & Compliance with Voting Requirements
3:00 PM
18.0Various Report Outs
18.1AQS Liaison
18.2SSC
18.3Planning & Ops
18.4IPC
4:00 pm
19.0Review of Procedure Changes
4:20 PM
20.0New Business and Priority
20.1New Technologies – (spreadsheet)
20.2Review Priority List
4:50 PM
21.0Meeting Closure Items
6:00 pm
ADJOURNMENT
ELECTRONICS Task Group (ETG) Task Group Meeting AgendaFebruary 2018
Monday, 19-Feb-2018
(quorum must be verbally established DAILY at the beginning of each meeting)
9:00 am – 10:00 am / Supplier Support Committee Leadership Team Opening Reception10:00 am – 1:00 pm / New Supplier Information Session – New Suppliers are encouraged to attend, and all Suppliers are welcome
9:00 am / CLOSED / 1.0OPENING COMMENTS (DAILY)
1.1CALL TO ORDER/VERBAL QUORUM CHECK
- VERIFY ONLY SUBSCRIBER MEMBERS WITH A VALID BADGE ARE IN ATTENDANCE
- INTRODUCTIONS
- SAFETY INFORMATION:
- REVIEW FIRE EXITS IN MEETING ROOM
- INFORM PRI STAFF PERSON OF ANY EMERGENCIES
- REVIEW CODE OF ETHICS (REF: ATTENDEES’ GUIDE) AND MEETING CONDUCT
- PRESENT THE ANTITRUST VIDEO (ONLY @ THE FIRST OPEN AND FIRST CLOSED MEETING OF THE WEEK FOR EACH TASK GROUP)
- REVIEW AGENDA
9:15 am / 2.0REVIEW DELEGATION STATUS / STAFF ENGINEER
9:30 am / 3.0REVIEW OF FAILURE CRITERIA / STAFF ENGINEER
10:00 am / 4.0MISC AUDITOR INFORMATION (as necessary)
4.1OP 1117 AUDITOR CONSISTENCY
4.2OP 1118 AUDIT OBSERVATIONS
4.3AUDITOR STATISTICS – DATA SET REVIEW
4.4AUDITOR CANDIDATE TEST QUESTION REVIEW (AS NEEDED) / STAFF ENGINEER
1:00 – 2:00 pm / LUNCH BREAK
2:00 pm / CLOSED / 1.0Opening Comments (daily)
1.1Call to Order/Quorum Check
- Introductions
2:10 pm / 5.0SUBSCRIBER DISCUSSION
5.1TECHNICAL DISCUSSIONS ASSOCIATED WITH AUDIT PACKAGES
5.2EAUDITNET TRAINING FOR NEW SUBSCRIBER VOTING MEMBERS (AS NECESSARY)
5.3REVIEW SUBSCRIBER MATRIX (AS NECESSARY) / SUBSCRIBERS
4:15 pm / 6.0PRESENTATION MATERIAL (AS NECESSARY)
6.1NMC TG REPORT OUT / SUBSCRIBERS
4:30 pm / 7.0SUPPLIER ONE-ON-ONE WITH TASK GROUP (INVITATION ONLY)
- 3 max 30 minutes each
6:00 pm / ADJOURNMENT
Tuesday, 20-Feb-2018
(quorum must be verbally established DAILY at the beginning of each meeting)
9:00 am / OPEN / 1.0Opening Comments (daily)1.1Call to Order/Quorum Check
- Introductions
- Safety Information:
- Review Fire Exits in Meeting Room
- Inform PRI Staff person of any emergencies
- Review Code of Ethics (Ref: Attendees’ Guide) and Meeting Conduct
- Present the Antitrust Video (only @ the first open and first closed meeting of the week for each Task Group)
9:30 am / 8.0Review and/or Accept
8.1Review Agenda
8.2Acceptance of Previous Meeting Minutes
8.3Status of Ballots (as applicable)
8.4Audit Observations Status (OP 1118)
8.5RAIL
8.6Call for New Business / ALL PARTICIPANTS
11:00 am / 9.0Supplier Support Committee (SSC) Meeting Notification / DOUG SCHUELLER
11:30 am / 10.0Review Sub-Team listing / STAFF ENGINEER
12:00 PM / 11.0Failure Criteria / ALL PARTICIPANTS
1:00 – 2:00 pm / Lunch Break
2:00 pm / OPEN / 1.0Opening Comments (daily)
1.1Call to Order/Quorum Check
- Introductions
2:15 pm / 12.0Comment Resolution for any ballot and b-form resolution / ALL ATTENDEES
4:30 pm / ADJOURNMENT
5:00 pm – 7:00 pm / Supplier Support Committee Meeting– All suppliers are encouraged to attend.
Wednesday, 21-Feb-2018
(quorum must be verbally established DAILY at the beginning of each meeting)
9:00 am / OPEN / 1.0Opening Comments (daily)1.1Call to Order/Quorum Check
- Introductions
9:15 am / 13.0Presentations (Report-outs)
14.1Gold Removal Presentation
14.2Subscriber findings
14.3CAAP Update
14.4MTL checklist review (microsection Lab) / VIJAY KUMAR
SUBSCRIBERS
JIM LEWIS (PRI)
SCOTT MEYER
10:00 am / 14.0Breakout Sessions and Thursday Morning
14.1AC7119/5 or Handbooks
14.2Depaneling (AC7120/12)
14.3AC7120 vs. J-STD-001G and other slash sheets
14.4AC7121 Handbook and Rev to checklist
14.5Update /11 handbook to use IEC paragraphs as source data
14.6Alternate – IPC 1601A
14.7IPC 4552A
14.8Microsection
14.9ETG welcome packgage for new Suppliers / ALL PARTICIPANTS
1:00 – 2:00 pm / Lunch Break
2:00 pm / OPEN / 14.0Breakout Sessions and Thursday Morning - continued / ALL PARTICIPANTS
3:45 pm / 14.0Breakout Session Report Out / LEADS
4:30 pm / ADJOURNMENT
5:00 pm – 7:00 pm / NMC Planning & Ops Meeting – Task Group Chairs & Staff Engineers are required to attend.
Thursday, 22-Feb-2018
(quorum must be verbally established DAILY at the beginning of each meeting)
9:00 am – 11:00 am / Nadcap Management Council Meeting – All members are encouraged to attend this informative and important meeting.11:20 am / OPEN / 1.0Opening Comments (daily)
1.1Call to Order/Quorum Check
- Introductions
11:30 am / 15.0Checklist Revision Handbook Update – Working Sessions Continued… / ALL ATTENDEES
1:00 – 2:00 pm / Lunch Break
2:00 pm / OPEN / 16.0Checklist Revision Handbook Report Out / LEADS
2:45 pm / 17.0Voting Member Updates & Compliance with Voting Requirements / STAFF ENGINEER
3:00 PM / 18.0Various Report Outs
18.1AQS Liaison
18.2SSC
18.3Planning & Ops
18.4IPC / Gilbert Shelby
Doug Schueller
Roy Garside
Scott Meyer
4:00 pm / 19.0Review of Procedure Changes
19.1Review any changes to General Operating Procedures since the last meeting
19.2Review any changes to your specific OP 1114 and OP 1116 Appendices since the last meeting / STAFF ENGINEER
4:20 PM / 20.0New Business and Priority
20.1New Technologies – (spreadsheet)
20.2Review Priority List / STAFF ENGINEER
4:50 PM / 21.0Meeting Closure Items
21.1Future Working Session Topics
21.2RAIL Review
21.3Review Action Items
21.4Set Agenda for Next Meeting using appropriate template / ALL ATTENDEES
6:00 pm / ADJOURNMENT