FORM TC-30
SUBJECT:EXPERIENCE DETAILS FOR Pre-Engineered Buildings(C33).
Sl.No. / Description / DetailsCompany’s Name
Registered/ Corporate Office Address
Telephone/ Fax Nos.
E-mail address
Website
Regional Offices situated at
Works/ Manufacturing facilities location/ Address
Available facilities
a) / for fabrication of various steel structural members (also indicate installed capacity)
b) / for profiling of sheeting coils to the pre-coated galvalume/ Zincalume sheeting (also indicate installed capacity) and related accessories
Do you have in-house design cell led by qualified structural engineer having minimum 15 yearsof experience in design of steel structures as per relevant BIS codes using STAAD PRO software
OR
Do you have tie-up with a design agency having the above qualifications
Have you undertaken the design/ fabrication/ installation of at least one PEB building with minimum 20 meters clear span in last 3 years
Maximum clear span of building executed
Largest building area undertaken
Tallest building undertaken in terms of height (at eaves level)
Related Capabilities: (Please indicate ‘Yes’ or ‘No’, if ‘Yes’ provide project references)
a) / Structural accessories like crane, monorail, mezzanine floor etc.:
b) / Architectural items like air extractor, false ceiling, doors, windows etc.
c) / Electrical works
d) / Related in-situ civil and finishing works like foundations, flooring etc.
Material of various structural components, i.e. Primary (portal frame) Secondary (purlins, side girts), Bracings & Plates
Codes followed for structural design
Codes followed for structural materials
Software used for structural analysis & design
ISO/ qualitycertification
Details of anywork done inEIL executed project
Is any of your other product already registered with EIL
Are you registered/ approved with CPWD/ MES/ any Government Agency
Enclosures’ check list: (Please submit the documents as applicable, in one set of hard copies & in electronic format- in a CD). Please note that all the documents should be certified true copy duly signed & stamped by Notary.
Sl.
No. / Document / Attached/ Not Attached / Remarks/ Description in brief
A. / Technical literature/ brochures/ specifications of the products.
B. / List of executed and on-going projects.
C. / Documentary evidence of:
i)Sl. No. 9 above
ii)Sl. No. 10 above In the form of Work order, completion Certificate/ Appreciation letter etc.
iii)Sl. No. 11
iv)Sl. No. 12
v)Sl. No. 13 above
vi)Sl. No. 19 above
vii)Sl. No. 20 above
viii)Sl. No. 21 above
ix)Sl. No. 22 above
x)Sample design with calculations
D. / Documentary evidence of your performance of the product (for example in the form of completion certificate or appreciation letter from client/ buyer etc.)
E. / Any Other enclosure
Bidder’s Name ______
Name and Designation of Signatory ______Signature with Date ______
TC-Form-301 of 2