Kawasaki Ultra 250

Ultra 250 Impellers

Recommended Skat-Trak Impeller
Model / Year / Original Impeller / Pump Dia. / Stock Engine / Limited Engine / Modified Engine
Ultra 250 / 2007 / n/a / 155mm / 13/18 155-75-20 Swirl / 13/18 or 13/19 155-75-20 / 13/19 or 14/20 155-75-20 Swirl

Kawasaki 155-75-20 Swirl

Retail $244.99

Pitch Part Number

12/19SK557520SW1219

12/20SK557520SW1220

13/18SK557520SW1318

13/19SK557520SW1319

13/21SK557520SW1321

14/20SK557520SW1420

Ultra 250Magnum Pumps

Skat-Trak now offers a variety of Magnum Pumps and Nozzle Kits for the Kawasaki Ultra 250 Jet Ski. We offer our Kawasaki E-75 (155 mm), Kawasaki E*-75 (158 mm), and Kawasaki E+-75 (160 mm) in a 6 Vane Standard, 8 Vane Standard, 12 Vane Standard or Set Back, and 14 Vane Standard or Set Back stainless steel stator configurations. The variety of magnum pumps allows us to customize a Magnum Pump system for your racing application and horsepower needs.

For replacement pumps on stock Kawasaki runabout or for offshore-endurance racing, we recommend running our 6 Vane and 8 Vane stator sections. The 6 and 8 vane stator configurations work very well on top speed performance. The stainless steel stator vane sections will give you the durability and reliability the stock OEM aluminum pump housings can not. If you are running a modified Kawasaki watercraft, the Magnum Pumps are a must.

For the closed coarse racing enthusiast, our 12 Vane and 14 Vane Magnum Pumps will provide you with the hook up and acceleration needed for rough water and buoy to buoy performance. Acceleration is everything in closed coarse racing. It has been proven in the past that the rider with the quickest watercraft will beat the rider with the fastest watercraft in closed coarse racing.

The 12 Vane and 14 Vane stator sections are available in Standard or Set Back applications. The Standard Magnum Pumps locate the impeller and stator vane section in the stock or “Standard” position. The stock OEM drive shaft is compatible with the Standard Magnum Pumps.

The Set Back feature moves the impeller and stator vane section back internally in the pump housing. This requires you to run an extended drive shaft or a Long Nose Magnum Swirl impeller to make up the distance the impeller and stator vane section are “Set Back”. We do have extended drive shafts and Long Nose Magnum Swirls available for the Kawasaki Ultra 250 Jet Ski’s. We have found with testing that the 12 Vane Set Back and 14 Vane Set Back Magnum Pumps are faster on top speed when compared to the 12 Vane Standard and 14 Vane Standard Magnum Pump.

The Kawasaki Ultra 250 Magnum Pumps come complete with a one piece stainless steel wear ring and stator vane section, one Magnum Swirl impeller, impeller shaft, bearings, seals, collar, bushing, o-rings, and a billet aluminum tail cone. This Magnum Pump has capabilities of triple cooling lines when requested. The bearing carrier, bearings, and tail cone are set up to run in an oil bath.

Retail $ 1094.62

E-75 155MM KAWASAKI ULTRA 250 MAGNUM PUMP
ITEM / DESCRIPTION
PSK250NEWE6 / 6-vane Kaw "E-75" 155 Ultra 250 New
PSK250NEWE8 / 8-vane Kaw "E-75" 155 Ultra 250 New
PSK250NEWE12 / 12-vane Kaw "E-75" 155 Ultra 250New
PSK250NEWE12SB / 12-vane Kaw "E-75" 155 Ultra 250New Set Back
PSK250NEWE14 / 14-vane Kaw "E-75" 155 Ultra 250New
PSK250NEWE14SB / 14-vane Kaw "E-75" 155 Ultra 250New Set Back
PSK250NEWEWR / Kawasaki "E-75" 155 Ultra 250Wear Ring
E*-75 158MM KAWASAKI ULTRA 250 MAGNUM PUMP
ITEM / DESCRIPTION
PSK250NEWE586 / 6-vane Kaw "E-75" 158Ultra 250New
PSK250NEWE588 / 8-vane Kaw "E-75" 158Ultra 250New
PSK250NEWE5812 / 12-vane Kaw "E-75" 158Ultra 250New
PSK250NEWE5812SB / 12-vane Kaw "E-75" 158 Ultra 250New Set Back
PSK250NEWE5814 / 14-vane Kaw "E-75" 158Ultra 250New
PSK250NEWE5814SB / 14-vane Kaw "E-75" 158 Ultra 250New Set Back
PSK250NEWE58WR / Kawasaki "E-75" 158 Ultra 250Wear Ring
E+75 160MM KAWASAKI ULTRA 250 MAGNUM PUMP
ITEM / DESCRIPTION
PSK250NEWE606 / 6-vane Kaw "E-75" 160Ultra 250New
PSK250NEWE608 / 8-vane Kaw "E-75" 160Ultra 250New
PSK250NEWE6012 / 12-vane Kaw "E-75" 160Ultra 250New
PSK250NEWE6012SB / 12-vane Kaw "E-75" 160 Ultra 250New Set Back
PSK250NEWE6014 / 14-vane Kaw "E-75" 160Ultra 250New
PSK250NEWE6014SB / 14-vane Kaw "E-75" 10 Ultra 250New Set Back
PSK250NEWE60WR / Kawasaki "E-75" 160 Ultra 250Wear Ring

Kawasaki Ultra 250Nozzle Systems

We also offer a Venturi nozzle, variable trim ring, and Steering nozzle for the Kawasaki Ultra 250 Jet Ski.These products are offered in three different configurations. The venture nozzle kits come complete with venture nozzle, variable trim ring, steering nozzle, four interchangeable rings of your choice, and all the accessories (nuts, bolts, washers, lock washers, etc...) needed toinstall the nozzle kits.

Our Kawasaki nozzle kit includes interchangeable ring capabilities. The interchangeable rings allow you to adjust the exit diameter size of the venturi and steering nozzle. The rings give you complete control to fine tune the jet pump system. The interchangeable rings range from 83 mm in diameter to 95 mm in diameter in 1 mm increments. (note: reverse gate systems will need to be removed when running our nozzle system)

We offer the Kawasaki Nozzle Kit in four different configurations. The first configuration, Manual Drop, uses a lever and cable operated system to trim the steering nozzle manually. This gives the rider complete control of the trim system. The second isan Auto Drop. The Auto Drop automatically drops the nozzle using a pivot system in the Venturi/Steering nozzle. This is a hands free drop system which works as you turn your watercraft. The more you turn, the further the nozzle drops. Engagement of the Drop system is adjustable. The third is both Manual Trim and Auto drop combined. This gives you control of the Nozzle Drop system when on the start or in a straight line as well as the automatic drop when turning corners.Lastly we offer a fixed trim system hardware kit to keep the nozzle in a fixed position. More top speed, angle the steering nozzle up. Need to stay hooked up in rough water, angle the steering nozzle down. This allows you to adjust the steering nozzle to a fixed position to work best for your riding applications and conditions.

Retail $ 598.75

MANUAL TRIM
Manual Drop, uses a lever and cable operated system to trim the steering nozzle manually. This gives the rider complete control of the trim system.
ITEM / DESCRIPTION
PRNKAW481
PRNKAW551
PRNKAW581
PRNKAW601 / Manual Trim Nozzle 148MM
Manual Trim Nozzle 155MM
Manual Trim Nozzle 158MM
Manual Trim Nozzle 160MM

Retail $ 626.25

AUTOMATIC DROP
Auto Drop, drops or trims the steering nozzle automatically when steering the watercraft left and right.
ITEM / DESCRIPTION
PRNKAW48R2
PRNKAW55R2
PRNKAW58R2
PRNKAW60R2 / Automatic Drop Nozzle 148MM
Automatic Drop Nozzle 155MM
Automatic Drop Nozzle 158MM
Automatic Drop Nozzle 160MM

Retail $ 635.05

MANUAL TRIM WITH THE AUTOMATIC DROP
Auto & Manual Drop, utilizes both systems in one nozzle.This system will automatically drop the nozzle when turning the watercraft plus you have the capabilities of manually dropping the nozzle.
ITEM / DESCRIPTION
PRNKAW48R3
PRNKAW55R3
PRNKAW58R3
PRNKAW60R3 / Manual Trim with the Automatic Drop Nozzle 148MM
Manual Trim with the Automatic Drop Nozzle 155MM
Manual Trim with the Automatic Drop Nozzle 158MM
Manual Trim with the Automatic Drop Nozzle 160MM

Retail $ 65.34

HARDWARE KIT FOR FIXED POSITION
ITEM / DESCRIPTION
PSK150IHRDK / KAW ULTRA/STXR/STX-F TRIM RING BRACKET

Heavy Duty Steering Cables

Don’t run the risk of having a steering failure. Modified Kawasaki Ultra 250 Jet Ski’s can experience steering cable failure with the OEM cable. At twice the thickness, our replacement cables are more durable and reliable when compared to the stock steering cable. The cable comes complete with a quick disconnect and a stainless steel-ball joint cable end for easy installation.

Retail $ 187.50

Kawasaki Steering Cables
ITEM / DESCRIPTION
PRSTKAWU250A / Kawasaki Ultra 250 Heavy Armor Steering Cable with ends

OEM Kawasaki Ultra 250Nozzle Modifications

New OEM Kawasaki Venturi Nozzle

Brand new OEM Kawasaki Venturi nozzle

Part Number =

Retail Price -$

Nozzle Modification

Customer supplied OEM Nozzle or New OEM Nozzle purchased from us bored out to accept our stainless steel Nozzle Rings. Comes with 3 ring sizes of your choice.

Part Number - PRNKAW

Retail Price -$225.00

Additional Nozzle rings

Are available in sizes 78mm, 78.5mm, 79mm, 79.5mm, 80mm, 80.5mm, 81mm, 81.5mm, 82mm, 82.5mm, 83mm, 83.5mm, 84mm, 84.5mm, 85mm, 85.5mm, 86mm, 87mm, 88mm, 89mm, 90mm

Part Number –PRNSDRING??

Retail Price -$37.98