Chrysler LLCConstruction Standards

12/17/04

SECTION 10801 - TOILET AND BATH ACCESSORIES

PART 1 - GENERAL

1.1SUMMARY

  1. This Section includes washroom accessories.

1.2SUBMITTALS

  1. Product Data: For each type of product indicated.

1.3COORDINATION

  1. Coordinate accessory locations with other work to prevent interference with clearances required for access by people with disabilities, and for proper installation, adjustment, operation, cleaning, and servicing of accessories.

1.4WARRANTY

  1. Special Mirror Warranty: Manufacturer's standard form in which manufacturer agrees to replace mirrors that develop visible silver spoilage defects and that fail in materials or workmanship within specified warranty period.
  2. Warranty Period: 15 years from date of Substantial Completion.

PART 2 - PRODUCTS

2.1WASHROOM ACCESSORIES

  1. Basis-of-Design Product: The design for accessories is based on products indicated. Subject to compliance with requirements, provide the named product or a comparable product by one of the following:
  2. American Specialties, Inc.
  3. Bobrick Washroom Equipment, Inc.
  4. Bradley Corporation.
  5. General Accessory Manufacturing Co. (GAMCO).
  6. Toilet Tissue (Roll) Dispenser:
  7. Basis-of-Design Product: Bobrick B-265, Bradley 5224, or GAMCO 23.
  8. Type: Double Roll dispenser.
  9. Mounting: Surface mounted.
  10. Material: Stainless steel.
  11. Operation: Spindleless with tension-spring controlled delivery and self-locking device extending through core that prevents core removal until roll is empty.
  12. Capacity: Designed for 4-1/2- or 5-inch- diameter-core tissue rolls.
  13. Paper Towel (Folded) Dispenser:
  14. Basis-of-Design Product: Bobrick B-262, Bradley 25015, or GAMCO TD-2
  15. Mounting: Surface.
  16. Towel Type and Capacity: Sized for minimum of 400 C-fold or 525 multifold paper towels without using special adapters; with hinged front.
  17. Material: Stainless steel.
  18. Lockset: Tumbler type.
  19. Refill Indicators: Pierced slots at sides or front.
  20. Waste Receptacle:
  21. Basis-of-Design Product: Bobrick B-279, Bradley357, or GAMCO WR-2
  22. Type: Surface mounted, open top.
  23. Capacity: 6.4 gallon, nominal
  24. Liner: Reusable vinyl liner.
  25. Combination Towel Dispenser/Waste Receptacle:
  26. Basis-of-Design Product: Bobrick B-3944, Bradley234, or GAMCO TW-1.
  27. Type: Recessed with projecting receptacle designed for a nominal 4-inch wall depth.
  28. Towel-Dispenser Capacity: 600 C-fold or 800 multifold paper towels.
  29. Waste-Receptacle Capacity: 12 gal..
  30. Accessories: Vinyl, reusable waste-receptacle liner and tumbler locksets.
  31. Liquid-Soap Dispenser:
  32. Basis-of-Design Product: Bobrick B-8221, or GAMCO G-64LB.
  33. Mounting: Deck mounted on vanity; confirm spout length with mounting position. .
  34. Capacity: Minimum20 fl oz.
  35. Materials: Stainless steel spout with unbreakable polyethylene container.
  36. Stainless-Steel Soap Valve: Confirm soap type with the Owner; unless otherwise directed, provide for dispensing soap in liquid form.
  37. Refill: Top filling.
  38. Basis-of-Design Product: Bobrick B-2111, Bradley6562, or GAMCO G16AP or G2.
  39. Mounting: Surface.
  40. Capacity: Minimum 40-oz..
  41. Materials: Stainless-steel cover with unbreakable window-type refill indicator.
  42. Stainless-Steel Soap Valve: Confirm soap type with the Owner; unless otherwise directed, designed for dispensing soap in liquid form.
  43. Refill Indicator: Window type.
  44. Refill: Top filling.
  45. Grab Bar:
  46. Basis-of-Design Product: Bobrick B-5806 Series, Bradley832Series, or GAMCO125S Series.
  47. Material: Stainless steel, 0.05 inch thick.
  48. Mounting: Concealed .
  49. Gripping Surfaces: Smooth, satin finish.
  50. Outside Diameter: 1-1/4 inches.
  51. Configuration and Length: As indicated on Drawings, or directed.
  52. Vendor:
  53. Basis-of-Design Product: Bobrick B-352, Bradley4017, or GAMCO NV2-4.
  54. Type: Sanitary napkin and tampon.
  55. Mounting: Fully recessed or semi-recessed, designed for 4-inchwall depth; maximum exposure 3 inches.
  56. Capacity: Not less than 30 napkins and 22 tampons.
  57. Operation: No coin (free) unless otherwise directed by the Owner.
  58. Sanitary Napkin Disposal Unit:
  59. Basis-of-Design Product: Bobrick B-254, Bradley4722, or GAMCO ND-5.
  60. Mounting: Surface .
  61. Material: Stainless steel.
  62. Door or Cover: Self-closing.
  63. Receptacle: Removable and reusable.
  64. Mirror Unit:
  65. Basis-of-Design Product: Bobrick B-165, Bradley780, or GAMCO C-16 Series.
  66. Frame: Stainless-steel channel.
  67. Mop and Broom Holder:
  68. Basis-of-Design Product: Bobrick B-239, Bradley9934, or GAMCO US5.
  69. Material: Stainless steel.
  70. Nominal Length: 36 inches .
  71. Shelf: 0.05-inch- thick (18 gage) stainless steel
  72. Hooks: Three .
  73. Mop/Broom Holders: Four , spring-loaded, rubber hat, cam type.
  74. Warm-Air Dryer:
  75. Basis-of-Design Product: American Dryer "A" Series.
  76. Type: Electronic-sensor activated.
  77. Mounting: Surface.
  78. Material: White-painted metal.

2.2UNDERLAVATORY GUARDS

  1. Underlavatory Guard:
  2. Description: Insulating pipe covering for supply and drain piping assemblies that prevent direct contact with and burns from piping, and allow service access without removing coverings.
  3. Material and Finish: Antimicrobial, molded-plastic, white.

PART 3 - EXECUTION

3.1INSTALLATION

  1. Install accessories according to manufacturers' written instructions, using fasteners appropriate to substrate indicated and recommended by unit manufacturer. Install units level, plumb, and firmly anchored in locations and at heights indicated.
  2. Install grab bars to withstand a downward load of at least 250 lbf, when tested according to method in ASTMF446.
  3. Adjust accessories for unencumbered, smooth operation and verify that mechanisms function properly. Replace damaged or defective items. Remove temporary labels and protective coatings.

END OF SECTION

TOILET AND BATH ACCESSORIES10801 - 1 of 3