SECTION 07 72 00
ROOF DRAIN AND VENT ACCESSORIES
Display hidden notes to specifier. (Don't know how? Click Here)
Copyright 2018 - 2018 ARCAT, Inc. - All rights reserved
** NOTE TO SPECIFIER ** Marathon Roofing Products Inc.; Roof drains, vents, accessories and pedestal support products.
.
This section is based on the products of Marathon Roofing Products Inc., which is located at:
3310 Benzing Rd.
Orchard Park, NY 14127-1538
Toll Free: 800-828-8424
Phone: 716-332-7673
Fax: 716-332-7676
Web:
Marathon Roofing Products is ranked as one of the nation's leaders in the manufacturing and master distributor of commercial roof drains, vents, equipment and accessories. Marathon is committed to providing its significant distributor network, architects, specifiers and ultimately the contractor with quality products, competitive prices and the best customer service in the industry.
Marathon was started in 1966 as a small manufacturing facility of Copper Drains in Buffalo, NY with an emphasis on growing customer base and its line of products. Since those small beginnings, Marathon has expanded significantly to its new facility in Orchard Park, NY in 2008 and sells products throughout the US, Canada and many countries abroad.
As a privately held company you can be sure that you will get the personal service you have been use to for more than 50 years. As President and Owner of Marathon, I have made it my mission that even with Marathon's expansion that the personalized service must be maintained. Marathon's idea is simple - "Innovation and continued expansion will assure us success for years to come". Our continued efforts to create long standing relationships with our customers and the company's reputation for quality service will assure growth in the future.
1 GENERAL
1.1 SECTION INCLUDES
** NOTE TO SPECIFIER ** Delete items below not required for project.
1.1.1 Roof Drains.
1.1.2 Roof Vents
1.1.3 Roof Security Vent Flashing
1.1.4 Roof Penetration Flashings
1.2 RELATED SECTIONS
** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
1.2.1 Section 06 10 00 - Rough Carpentry.
1.2.2 Section 07 26 23 - Below-Grade Gas Retarders .
1.2.3 Division 07 - Adjacent Roofing Systems.
1.2.4 Section 07 62 00 - Sheet Metal Flashing and Trim.
1.2.5 Section 07 91 23 - Backer Rods.
1.2.6 Section 22 10 00 - Plumbing Piping.
1.3 REFERENCES
** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
1.3.1 ASME A112.6.4 - Roof, Deck, and Balcony Drains.
1.4 SUBMITTALS
1.4.1 Submit under provisions of Section 01 30 00 - Administrative Requirements.
1.4.2 Product Data: Manufacturer's data sheets on each product to be used, including:
1.4.2.1 Preparation instructions and recommendations.
1.4.2.2 Storage and handling requirements and recommendations.
1.4.2.3 Installation methods.
1.4.3 Shop Drawings: Submit shop drawings showing layout, profiles and product components, including anchorage, and accessories.
1.4.4 Manufacturer's Certificates: Certify products meet or exceed specified requirements.
1.5 QUALITY ASSURANCE
1.5.1 Manufacturer Qualifications: Minimum 50 years manufacturing similar products.
1.5.2 Installer Qualifications: Minimum 2 years installing similar products.
1.6 DELIVERY, STORAGE, AND HANDLING
1.6.1 Deliver products in manufacturer's unopened packaging with labels intact and legible until ready for installation.
1.6.2 Store off the ground and under cover. Protect internal parts, ends, inlets, outlets, and specialties against corrosion, dirt, and damage.
1.7 SEQUENCING
1.7.1 Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.
1.8 PROJECT CONDITIONS
1.8.1 Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
2 PRODUCTS
2.1 MANUFACTURERS
2.1.1 Acceptable Manufacturer: Marathon Roofing Products Inc., which is located at: 3310 Benzing Rd.; Orchard Park, NY 14127-1538; Toll Free Tel: 800-828-8424; Tel: 716-332-7673; Fax: 716-332-7676; Email:request info (); Web:
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
2.1.2 Substitutions: Not permitted.
2.1.3 Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.
2.2 ROOF DRAINS
2.2.1 Aluminator Drain: All aluminum retrofit drain with aluminum body
2.2.1.1 Construction:
2.2.1.1.1 Heavy duty spun aluminum (.125 gauge).
2.2.1.1.2 Heavy duty aluminum ring that is 1-1/4 inches tall
2.2.1.1.2.1 12 scallops to maximize drainage
2.2.1.1.2.2 Seep holes on bottom of ring and bolt in place
2.2.1.1.2.3 3 bolt aluminum strainer that is 10 inches by 6 inches tall
2.2.1.1.3 Standard with ProSeal rubber seal that prevents water back-up issues
2.2.1.1.4 Larger stud diameter for increased strength of hardware
2.2.1.1.5 16 inch flange diameter
2.2.1.1.6 12 inch drain outlet length
2.2.1.2 Drain Size:
** NOTE TO SPECIFIER ** Select the size(s) required and delete those not required.
2.2.1.2.1 2 inch - Fits pipe I.D 1-3/4 inches to 2-1/4 inches, with expanding tape for seal.
2.2.1.2.2 3 inch - Fits pipe I.D 2-7/8 inches to 3-1/4 inches.
2.2.1.2.3 4 inch - Fits pipe I.D 3-7/8 inches to 4-1/4 inches.
2.2.1.2.4 5 inch - Fits pipe I.D 4-7/8 inches to 5-1/4 inches.
2.2.1.2.5 6 inch - Fits pipe I.D 5-7/8 inches to 6-1/4 inches.
2.2.1.2.6 8 inch - Fits pipe I.D 7-3/4 inches to 8-1/4 inches, with expanding tape for seal.
2.2.1.3 Options:
** NOTE TO SPECIFIER ** Select the option(s) required and delete those not required.
2.2.1.3.1 2 inch low profile strainer
2.2.1.3.2 2 inch high overflow
2.2.1.3.3 4 inch high overflow
2.2.1.3.4 TPO flange coating
2.2.1.3.5 PVC flange coating
2.2.1.3.6 Asphalt primed
2.2.2 Aluminum Fast Flow Drain (retrofit)
2.2.2.1 Construction:
2.2.2.1.1 Heavy gauge (.125) spun aluminum
2.2.2.1.2 New PVC clamping ring style for single-ply systems, cast iron or aluminum rings optional
2.2.2.1.3 Bolt in place PVC strainer dome standard, cast iron or aluminum strainers optional
** NOTE TO SPECIFIER ** Select the type and size(s) required and delete those not required.
2.2.2.2 Fast Flow Drain: Fits existing drain size.
2.2.2.2.1 FF175: 1-3/4 inch to 2-1/4 inch
2.2.2.2.2 FF275: 2-3/4 inch to 3-1/4 inch
2.2.2.2.3 FF375: 3-3/4 inch to 4-1/4 inch
2.2.2.2.4 FF475: 4-3/4 inch to 5-1/4 inch
2.2.2.2.5 FF575: 5-3/4 inch to 6-1/4 inch
2.2.2.3 Fast Flow Drain with clamping ring: Fits existing drain size.
2.2.2.3.1 FF175CR: 1-3/4 inch to 2-1/4 inch
2.2.2.3.2 FF275CR: 2-3/4 inch to 3-1/4 inch
2.2.2.3.3 FF375CR: 3-3/4 inch to 4-1/4 inch
2.2.2.3.4 FF475CR: 4-3/4 inch to 5-1/4 inch
2.2.2.3.5 FF575CR: 5-3/4 inch to 6-1/4 inch
2.2.2.4 Fast Flow Drain with expanding anti-back-up tape: Fits existing drain size.
2.2.2.4.1 FF175-S: 1-3/4 inch to 2-1/4 inch
2.2.2.4.2 FF275-S: 2-3/4 inch to 3-1/4 inch
2.2.2.4.3 FF375-S: 3-3/4 inch to 4-1/4 inch
2.2.2.4.4 FF475-S: 4-3/4 inch to 5-1/4 inch
2.2.2.4.5 FF575-S: 5-3/4 inch to 6-1/4 inch
2.2.2.5 Fast Flow Drain with expanding anti-back-up tape and clamping ring: Fits existing drain size.
2.2.2.5.1 FF175-SCR: 1-3/4 inch to 2-1/4 inch
2.2.2.5.2 FF275-SCR: 2-3/4 inch to 3-1/4 inch
2.2.2.5.3 FF375-SCR: 3-3/4 inch to 4-1/4 inch
2.2.2.5.4 FF475-SCR: 4-3/4 inch to 5-1/4 inch
2.2.2.5.5 FF575-SCR: 5-3/4 inch to 6-1/4 inch
** NOTE TO SPECIFIER ** Select the option(s) required and delete those not required.
2.2.2.6 Connection Options:
2.2.2.6.1 Straight rubber coupling
2.2.2.6.2 XJ rubber coupling
2.2.2.6.3 Bushing reducers
2.2.2.6.4 FURNCO 90 degree elbow
2.2.2.7 Flange Options
2.2.2.7.1 Asphalt Primed finish
2.2.2.7.2 PVC coated
2.2.2.7.3 TPO coated
2.2.2.8 Strainer Options
2.2.2.8.1 8 inch aluminum strainer
2.2.2.8.2 8 inch cast iron strainer
2.2.2.8.3 8 inch plastic strainer
2.2.2.8.4 10 inch cast iron strainer
2.2.2.8.5 10 inch aluminum strainer
2.2.2.8.6 10 inch plastic strainer
2.2.3 Aluminum Fast Flow Drain (direct connect)
2.2.3.1 Construction:
2.2.3.1.1 Heavy gauge (.125) spun aluminum
2.2.3.1.2 New PVC clamping ring style for single-ply systems, cast iron or aluminum rings optional
2.2.3.1.3 Bolt in place PVC strainer dome standard, cast iron or aluminum strainers optional
** NOTE TO SPECIFIER ** Select the type and size(s) required and delete those not required.
2.2.3.2 Fast Flow Size:
2.2.3.2.1 FF200: 2 inch
2.2.3.2.2 FF300: 3 inch
2.2.3.2.3 FF400: 4 inch
2.2.3.3 Fast Flow Size with clamping ring:
2.2.3.3.1 FF200CR: 2 inch
2.2.3.3.2 FF300CR: 3 inch
2.2.3.3.3 FF400CR: 4 inch
** NOTE TO SPECIFIER ** Select the option(s) required and delete those not required.
2.2.3.4 Connection Options:
2.2.3.4.1 Straight rubber coupling
2.2.3.4.2 XJ rubber coupling
2.2.3.4.3 Bushing reducers
2.2.3.4.4 FURNCO 90 degree elbow
2.2.3.5 Flange Options
2.2.3.5.1 Asphalt Primed finish
2.2.3.5.2 PVC coated
2.2.3.5.3 TPO coated
2.2.3.6 Strainer Options
2.2.3.6.1 8 inch aluminum strainer
2.2.3.6.2 8 inch cast iron strainer
2.2.3.6.3 8 inch plastic strainer
2.2.3.6.4 10 inch cast iron strainer
2.2.3.6.5 10 inch aluminum strainer
2.2.3.6.6 10 inch plastic strainer
2.2.4 CENTURY Series Copper Roof Drain
2.2.4.1 Construction:
2.2.4.1.1 All copper drain
2.2.4.1.2 9 inch outlet length standard (longer lengths available)
2.2.4.1.3 Polyethylene clamping ring standard (metal or aluminum ring optional)
** NOTE TO SPECIFIER ** Select the type and size(s) required and delete those not required.
2.2.4.2 Century Straight Style: Fits drain pipe size
2.2.4.2.1 CS29: 2 inch drain size, 14 inch flange
2.2.4.2.2 CS39: 3 inch drain size, 14 inch flange
2.2.4.2.3 CS49: 4 inch drain size, 14 inch flange
2.2.4.3 Century Straight Style / Clamping Ring: Fits drain pipe size
2.2.4.3.1 CS29 CR(E): 2 inch drain size, 14 inch flange
2.2.4.3.2 CS39 CR(E): 3 inch drain size, 14 inch flange
2.2.4.3.3 CS49 CR(E): 4 inch drain size, 14 inch flange
2.2.4.4 Century Straight Style: Fits drain pipe size
2.2.4.4.1 CPS29: 2 inch drain size, 18 inch flange
2.2.4.4.2 CPS39: 3 inch drain size, 18 inch flange
2.2.4.4.3 CPS49: 4 inch drain size, 18 inch flange
2.2.4.4.4 CPS69: 6 inch drain size, 18 inch flange
2.2.4.5 Century Straight Style / Clamping Ring: Fits drain pipe size
2.2.4.5.1 CPS29 CR(E): 2 inch drain size, 18 inch flange
2.2.4.5.2 CPS39 CR(E): 3 inch drain size, 18 inch flange
2.2.4.5.3 CPS49 CR(E): 4 inch drain size, 18 inch flange
2.2.4.5.4 CPS69 CR(E): 6 inch drain size, 18 inch flange
** NOTE TO SPECIFIER ** Select the option(s) required and delete those not required.
2.2.4.6 Connection Options:
2.2.4.6.1 Straight rubber coupling
2.2.4.6.2 XJ rubber coupling
2.2.4.6.3 FURNCO 90 degree elbow
2.2.4.7 Flange Options
2.2.4.7.1 Asphalt primed finish
2.2.4.7.2 PVC coated
2.2.4.7.3 TPO coated
2.2.4.8 Strainer Options
2.2.4.8.1 10 inch High density polyethylene
2.2.4.8.2 10 inch cast iron strainer
2.2.4.8.3 10 inch aluminum strainer
2.2.5 COPPERTITE Roof Drain
2.2.5.1 Construction:
2.2.5.1.1 Copper retro-fit drain
2.2.5.1.2 2 inch wide expandable sealant tape designed to expand approximately an inch to prevent water back-ups or proseal
2.2.5.1.3 9 inch outlet length standard (longer lengths available)
2.2.5.1.4 Polyethylene clamping ring standard (metal or aluminum ring optional)
** NOTE TO SPECIFIER ** Select the style and size(s) required and delete those not required.
2.2.5.2 Coppertight Straight Style: Fits drain pipe size
2.2.5.2.1 CTS29: 1-3/4 inch to 2-1/4 inch, 14 inch flange
2.2.5.2.2 CTS39: 2-7/8 inch to 3-1/4 inch, 14 inch flange
2.2.5.2.3 CTS49: 3-7/8 inch to 4-1/4 inch, 14 inch flange
2.2.5.2.4 CTS59: 4-7/8 inch to 5-1/4 inch, 18 inch flange
2.2.5.2.5 CTS69: 5-7/8 inch to 6-1/4 inch, 18 inch flange
2.2.5.2.6 CTS89: 7-3/4 inch to 8-1/4 inch, 18 inch flange
2.2.5.2.7 CTS109: 9-7/8 inch to 10-1/4 inch, 18 inch flange
2.2.5.3 Coppertight Straight Style / Clamping Ring: Fits drain pipe size
2.2.5.3.1 CTS29CR: 1-3/4 inch to 2-1/4 inch, 14 inch flange
2.2.5.3.2 CTS39CR: 2-7/8 inch to 3-1/4 inch, 14 inch flange
2.2.5.3.3 CTS49CR: 3-7/8 inch to 4-1/4 inch, 14 inch flange
2.2.5.3.4 CTS59CR: 4-7/8 inch to 5-1/4 inch, 18 inch flange
2.2.5.3.5 CTS69CR: 5-7/8 inch to 6-1/4 inch, 18 inch flange
2.2.5.3.6 CTS89CR: 7-3/4 inch to 8-1/4 inch, 18 inch flange
2.2.5.3.7 CTS109: 9-7/8 inch to 10-1/4 inch, 18 inch flange
** NOTE TO SPECIFIER ** Select the option(s) required and delete those not required.
2.2.5.4 Flange Options
2.2.5.4.1 Asphalt primed finish
2.2.5.4.2 PVC coated
2.2.5.4.3 TPO coated
2.2.5.5 Strainer Options
2.2.5.5.1 High density polyethylene
2.2.5.5.2 Cast iron strainer
2.2.6 PROLINER series drain: Retrofit roof drain.
2.2.6.1 Construction:
2.2.6.1.1 Provides multiple seals for water back-up prevention
2.2.6.1.2 Polyethylene clamping ring standard (metal or aluminum ring optional)
** NOTE TO SPECIFIER ** Select the style and size(s) required and delete those not required.
2.2.6.2 Proliner Straight Style: Fits drain pipe size
2.2.6.2.1 PS2: 1-7/8 inch to 2-1/4 inch drain size, 18 inch flange
2.2.6.2.2 PS3: 2-7/8 inch to 3-1/4 inch drain size, 18 inch flange
2.2.6.2.3 PS4: 3-7/8 inch to 4-1/4 inch drain size, 18 inch flange
2.2.6.2.4 PS5: 4-7/8 inch to 5-1/4 inch drain size, 18 inch flange
2.2.6.2.5 PS6: 5-7/8 inch to 6-1/4 inch drain size, 18 inch flange
2.2.6.3 Proliner Straight Style: Fits drain non-standard pipe size
2.2.6.3.1 PS200: 2-1/4 inch to 2-5/8 inch drain size, 18 inch flange
2.2.6.3.2 PS300: 3-1/4 inch to 3-5/8 inch drain size, 18 inch flange
2.2.6.3.3 PS400: 4-1/4 inch to 4-5/8 inch drain size, 18 inch flange
2.2.6.3.4 PS500: 5-1/4 inch to 5-5/8 inch drain size, 18 inch flange
2.2.6.4 Proliner Straight Style / Clamping Ring: Fits drain pipe size
2.2.6.4.1 PS2CR: 1-7/8 inch to 2-1/4 inch drain size, 18 inch flange
2.2.6.4.2 PS3CR: 2-7/8 inch to 3-1/4 inch drain size, 18 inch flange
2.2.6.4.3 PS4CR: 3-7/8 inch to 4-1/4 inch drain size, 18 inch flange
2.2.6.4.4 PS5CR: 4-7/8 inch to 5-1/4 inch drain size, 18 inch flange
2.2.6.4.5 PS6CR: 5-7/8 inch to 6-1/4 inch drain size, 18 inch flange
2.2.6.5 Proliner Straight Style / Clamping Ring: Fits drain non-standard pipe size
2.2.6.5.1 PS200CR: 2-1/4 inch to 2-5/8 inch drain size, 18 inch flange
2.2.6.5.2 PS300CR: 3-1/4 inch to 3-5/8 inch drain size, 18 inch flange
2.2.6.5.3 PS400CR: 4-1/4 inch to 4-5/8 inch drain size, 18 inch flange
2.2.6.5.4 PS500CR: 5-1/4 inch to 5-5/8 inch drain size, 18 inch flange
** NOTE TO SPECIFIER ** Select the option(s) required and delete those not required.
2.2.6.6 Flange Options
2.2.6.6.1 Asphalt primed finish
2.2.6.6.2 PVC coated
2.2.6.6.3 TPO coated
2.2.6.7 Strainer Options
2.2.6.7.1 High density polyethylene
2.2.6.7.2 Cast iron strainer
2.2.6.7.3 Cast aluminum strainer
2.2.7 PROSEAL Copper Drain: Retrofit roof drain.
2.2.7.1 Construction:
2.2.7.1.1 Supplied with ProSeal mechanical seal for water back-up prevention.
** NOTE TO SPECIFIER ** Select the type and size(s) required and delete those not required.
2.2.7.2 ProSeal Straight: Fits drain pipe size.
2.2.7.2.1 ProSeal (STR) 3: 3 inch
2.2.7.2.2 ProSeal (STR) 4: 4 inch
2.2.7.2.3 ProSeal (STR) 5: 5 inch
2.2.7.2.4 ProSeal (STR) 6: 6 inch
2.2.7.3 Outlets: Available in variable lengths up to 15 inches.
2.2.7.4 Strainer
2.2.7.4.1 10 inch high density polyethylene
2.2.7.4.2 10 inch cast iron
2.2.7.4.3 10 inch aluminum
** NOTE TO SPECIFIER ** Select the option(s) required and delete those not required.
2.2.7.5 Flange Options
2.2.7.5.1 Asphalt primed finish
2.2.7.5.2 PVC coated
2.2.7.5.3 TPO coated
2.2.8 Side Outlet Copper Drain
2.2.8.1 Construction
2.2.8.1.1 Copper 90 degree outlet.
2.2.8.1.2 Direct connect
** NOTE TO SPECIFIER ** Select the style and size(s) required and delete those not required.
2.2.8.2 Style:
2.2.8.2.1 Standard with dome
2.2.8.2.2 Promenade style deck drain with low profile grate.
2.2.8.3 Size:
2.2.8.3.1 2 inch
2.2.8.3.2 3 inch
2.2.8.3.3 4 inch
** NOTE TO SPECIFIER ** Select the option(s) required and delete those not required.
2.2.8.4 Coupling Options
2.2.8.4.1 Straight rubber
2.2.8.4.2 Fernco 90 degree style
2.2.8.4.3 Straight Reducer style
2.2.8.5 Options
2.2.8.5.1 Clamping rings
2.2.8.5.2 PVC coated
2.2.8.5.3 TPO coated
2.2.8.5.4 Asphalt primed finish
2.2.8.5.5 Metal drain guards
2.2.8.6 Strainer Options
2.2.8.6.1 High density polyethylene
2.2.8.6.2 Cast iron strainer
2.2.8.6.3 Aluminum strainer
2.2.9 ENPOCO/URLD PVC Drain: Fully assembled kit
2.2.9.1 Construction:
2.2.9.1.1 RD1, PVC, ABS, or cast iron roof drain with aluminum alloy flashing clamp, and secured poly or cast iron dome.
** NOTE TO SPECIFIER ** Select the style and size(s) required and delete those not required.
2.2.9.2 Pipe Size:
2.2.9.2.1 RD1-2PVC: 2 inch PVC
2.2.9.2.2 RD1-2ABS: 2 inch ABS
2.2.9.2.3 RD1-2NH: 2 inch No Hub
2.2.9.2.4 RD1-3PVC: 3 inch PVC
2.2.9.2.5 RD1-3ABS: 3 inch ABS
2.2.9.2.6 RD1-3NH: 3 inch No Hub
2.2.9.2.7 RD1-4PVC: 4 inch PVC
2.2.9.2.8 RD1-4ABS: 4 inch ABS
2.2.9.2.9 RD1-4NH: 4 inch No Hub
2.2.9.2.10 RD1-6PVC: 6 inch PVC
2.2.9.2.11 RD1-6ABS: 6 inch ABS
2.2.9.2.12 RD1-6NH: 6 inch No Hub
** NOTE TO SPECIFIER ** Select the option(s) required and delete those not required.
2.2.9.3 Options
2.2.9.3.1 -D Deck Clamp
2.2.9.3.2 -E Adjustable Extension
2.2.9.3.3 -GG SS Gravel Guard
2.2.9.3.4 -A Aluminum Dome
2.2.9.3.5 -P Sump Receiver
2.2.9.3.6 -R 2 inch External Overflow Dam
2.2.9.3.7 -VP Vandal Proof Screws
2.2.9.3.8 -X Flotrol Device
2.2.9.3.9 -2DP Poly Dome Dome Only
2.2.9.3.10 -2D Cast Iron Dome Only
2.2.10 Cast Pak Drain - RD1
2.2.10.1 Construction:
2.2.10.1.1 Epoxy coated cast iron body, no hub outlet
2.2.10.1.2 Epoxy coated aluminum clamping ring with gravel stop.
2.2.10.1.3 Grooved for positive drainage on smooth surfaced roofs
2.2.10.1.4 Aluminum underdeck clamp fastens drain securely to deck
2.2.10.1.5 Flexible rubber coupling connects to PVC, ABS or cast iron pipe
2.2.10.1.6 Molded polyethylene dome strainer bolts securely to clamping ring
** NOTE TO SPECIFIER ** Select the size(s) required and delete those not required.
2.2.10.2 Drain Pipe Size:
2.2.10.2.1 3 inch, dome size 10.25 inch, dome height 5 inch, tail depth 3.25 inch.
2.2.10.2.2 4 inch, dome size 10.25 inch, dome height 5 inch, tail depth 3.25 inch.
2.2.10.2.3 6 inch, dome size 15.625 inch, dome height 8 inch, tail depth 5.5 inch by 12 inch strainer.
2.2.10.2.4 8 inch, dome size 15.625 inch, dome height 8 inch, tail depth 5.5 inch by 12 inch strainer.
2.2.10.2.5 10 inch, dome size 15.625 inch, dome height 8 inch, tail depth 5.5 inch by 12 inch strainer.
** NOTE TO SPECIFIER ** Select the option(s) required and delete those not required.
2.2.10.3 Overflow option available
2.2.10.4 Options
2.2.10.4.1 D Under Deck Clamp
2.2.10.4.2 E Extension Flange
2.2.10.4.3 R 2 inch External Overflow Dam
2.2.10.4.4 M Cast Iron Dome
2.2.10.4.5 A Aluminum Dome
2.2.10.4.6 P Bearing Pan
2.2.10.4.7 W Waterproofing Flange
2.2.10.4.8 X Flotrol Device
2.2.11 Extra Large Body Cast Iron Drain
2.2.11.1 4 bolt pattern ring
2.2.11.2 Ballast guard available in many sizes
** NOTE TO SPECIFIER ** Select the size(s) required and delete those not required.
2.2.11.3 Pipe Size:
2.2.11.3.1 RD-300-2: 2 inch
2.2.11.3.2 RD-300-3: 2 inch
2.2.11.3.3 RD-300-4: 2 inch
2.2.11.3.4 RD-300-5: 5 inch
2.2.11.3.5 RD-300-6: 6 inch
2.2.11.3.6 RD-300-8: 8 inch
2.2.11.3.7 RD-300-10: 10 inch
** NOTE TO SPECIFIER ** Select the option(s) required and delete those not required.
2.2.11.4 Options
2.2.11.4.1 -13 Galvanized Body and Clamp
2.2.11.4.2 -B Sump Receiver
2.2.11.4.3 -D Underdeck Clamp
2.2.11.4.4 -F Adjustable Extension Flange
2.2.11.4.5 -GSS Stainless Steel Ballast Guard
2.2.11.4.6 -K Ductile Iron Dome
2.2.11.4.7 -K13 Galvanized Dome
2.2.11.4.8 -K40 Ductile Iron Low Dome (4 inches high)
2.2.11.4.9 -K80 Aluminum Dome
2.2.11.4.10 -K81 Rough Bronze Dome
2.2.11.4.11 -K83 SS Mesh Covered Dome
2.2.11.4.12 -L Vandal Proof Dome
2.2.11.4.13 -R 2 inch External Water Dam
2.2.11.4.14 -W Adjustable Internal Water Dam
2.2.11.4.15 -85 IRMA Perf. SS Extension
2.2.12 Extra Large Body Cast Iron Drain - RD100CP
2.2.12.1 Construction:
2.2.12.1.1 Epoxy coated cast iron promenade roof drain with flashing clamp with integral gravel stop, 12-3/4 inch by 12-3/4 inch square epoxy coated ductile iron promenade top, and no hub (standard) outlet.
** NOTE TO SPECIFIER ** Select size(s) required and delete those not required.
2.2.12.2 Pipe Size:
2.2.12.2.1 RD-100-2: 2 inch
2.2.12.2.2 RD-100-3: 3 inch
2.2.12.2.3 RD-100-4: 4 inch
2.2.12.2.4 RD-100-5: 5 inch
2.2.12.2.5 RD-100-6: 6 inch
** NOTE TO SPECIFIER ** Select the option(s) required and delete those not required.
2.2.12.3 Options
2.2.12.3.1 -1 All Nickel Bronze Top
2.2.12.3.2 -6 Vandal Proof Top
2.2.12.3.3 -9 Hinged Grate
2.2.12.3.4 -12 Galvanized Top
2.2.12.3.5 -13 Galvanized Body and Flashing Clamp
2.2.12.3.6 -B Sump Receiver
2.2.12.3.7 -D Underdeck Clamp
2.2.12.3.8 -F Adjustable Extension Flange
2.2.12.3.9 -SO Side Outlet (2, 3,4 inch Only)
2.2.12.4 Optional Body Material
2.2.12.4.1 -60 PVC Body with Socket Outlet
2.2.12.4.2 -61 ABS Body with Socket Outlet
2.2.13 Small Body Cast Iron Drain - RD200CP
2.2.13.1 Construction:
2.2.13.1.1 Epoxy coated cast iron promenade roof drain with flashing clamp with integral gravel stop, 8 inch by 8 inch square epoxy coated ductile iron promenade top, and no hub (standard) outlet.
** NOTE TO SPECIFIER ** Select the type and size(s) required and delete those not required.
2.2.13.2 Pipe Size:
2.2.13.2.1 RD-200-2: 2 inch
2.2.13.2.2 RD-200-3: 3 inch
2.2.13.2.3 RD-200-4: 4 inch
2.2.13.3 Outlet Type:
2.2.13.3.1 NH: No Hub
2.2.13.3.2 P: Push On
2.2.13.3.3 T: Threaded Outlet
2.2.13.3.4 X: Inside Caulk
** NOTE TO SPECIFIER ** Select the option(s) required and delete those not required.
2.2.13.4 Options
2.2.13.4.1 -1 All Nickel Bronze Top
2.2.13.4.2 -6 Vandal Proof Top
2.2.13.4.3 -9 Hinged Grate
2.2.13.4.4 -12 Galvanized Top
2.2.13.4.5 -13 Galvanized Body and Flashing Clamp
2.2.13.4.6 -B Sump Receiver
2.2.13.4.7 -D Underdeck Clamp
2.2.13.4.8 -F Adjustable Extension Flange
2.2.13.4.9 -SO Side Outlet (2, 3,4 inch Only)
2.2.13.5 Optional Body Material
2.2.13.5.1 -60 PVC Body with Socket Outlet