Release Notes: Canvas Extension
Version 4.2.12 (December 16, 2013)
950 Series: Fixed material option on the lateral units.
Belong: Fixed a crash when modifying system tiles.
Canvas: Metallics should no longer be extremely reflective.
Canvas: Backpainted glass should no longer appear transparent.
Canvas: Panel type report can be created for selected tagged panels.
Canvas: Ind Tag for cantilevers and corner brackets appear in calculations.
Canvas: User materials are shown right in 3D when applied to tables and worksurfaces.
Canvas: Fixed a crash in the specials list when exporting to SIF.
Canvas: Insert Row button no longer displayed as black in Custom Legend/Notes dialog.
Canvas: Fixed crash when adding a duplicate COM.
Chairs: Fixed trim materials coming in blank on old drawings.
Compose: Top trim is now calculating the correct length for spanning glass stacks.
Compose: Gap no longer appears in countertop when panel is connected to a wall mount.
Compose: Countertop does not shrink 1” when placed next to a higher panel. Can stretch countertop 6” past panel end.
Compose: Can place top trim from the menu. Works the same as the frameless glass bottom rail. This functionality replaces the Change Top Trim functionality.
Compose: Glass stack no longer turns red when correctly spanned across panels with stack frames.
Compose Storage: Base options on all storage units now function properly.
Compose Storage: Fixed full height storage to retain their layout after changing the height if that layout is still available.
Enclose: Fixed a bug that was preventing painted tiles from being applied to solid/glass combination panels.
Enclose: Fixed a crash when using the Top Trim tool.
Enclose / Enclose Frameless Glass: Door no longer remember the last specified leaf finish between drawings.
Enclose / Enclose Frameless Glass: Corrected a bug that was preventing schemes from immediately changing door frame finishes.
Enclose / Enclose Frameless Glass: Fixed missing CNFG value for inline posts.
Enclose Frameless Glass: Fixed a crash casued from selecting the hardware latchset option on sliding doors.
Enclose Frameless Glass: Corrected the allocation of reveal connectors.
Enclose Frameless Glass: The "Merge Run" Tool has been repaired.
LifeSPACE: Fixed a crash that occurred when using the Existing animation.
Orlando: Wire channel has been removed, it is no longer available from Haworth.
Panel and Worksurface Accessories: Pencil Drawer Tag is now on the electrical layer.
Panel and Worksurface Accessories: Removed the decimals from the height option on external markerboards.
Places/UniGroup/UniGroup Too: Improved stretching for countertops. Countertops can extend 6” past the end of a panel.
Places: Fixed missing materials from on a number of different panels.
Planes: Fixed the 2D and 3D position of the supports on the conference round table.
Premise: Full height connector material options are now fixed.
Premise: Added the 58” full-height end-of-run.
Premise: Countertops can hang 6” past the end of a panel.
UniGroup: Correct part number for the base infeed now appear in calculations.
UniGroup: Top cap for T junctions will create the correct part number.
UniGroup Too: Part number BFM-1-B is now displayed correctly.
UniGroup Too: Added the missing variable height finish post configurations.
UniGroup Too: Fixed the sliding door filler post having no edge trim material in special cases.
X-Seires: Fixed a crash caused when using select lateral file top types.
X-Series: Fixed a crash caused when loading old drawings.
X-Series: Stretch animation properties added for X-Series casegoods.
X-Series: Top finish can be applied to the credenza through schemes.
X-Series: Vertical storage unit now defaults at 29” above the floor.
X-Series: Added the stationary conversion kit option.
X-Series: Lateral files now snap to other X-Series products.
X-Series: 36”x60” option removed from the executive overhang desk shell.
Walls: Applying labels no longer blocks further labelling.
Worksurfaces: Added missing descriptions when using the support legend.
Worksurfaces: Stretching the D-shaped convergent no longer generates multiple straight legs
Worksurfaces: Wrap-around transition extended shape corrected.
Worksurfaces: Limited the width for D-shaped convergent wrap-around with a wood finish.
Worksurfaces: Worksurface support panels can accept finishes applied through schemes.
Worksurfaces: worksurfaces that only have one possible wireway option no longer change the wireway default in the Component selection and last command.
Worksurfaces: Rectangular convergent fixed to not change its thickness to 1.19” when attaching or detaching to other products.
Worksurfaces: WUCZ-3636 shape corrected.
Worksurfaces: All auto-placed cantilevers appear when loading a drawing.
Worksurfaces: Removed wireway options for link 120 degree.
Worksurfaces: Corrected the part number for the link 120 degree.
Worksurfaces: Corner worksurface WUCA is available in wood when a valid size is chosen.
Worksurfaces: P-Leg no longer sticks out past the worksurface.
Worksurfaces: Cascade edge option removed for the link 120 degree with wood finish.
Worksurfaces: Cascade edge option removed from the sharp edge wedge worksurface.
Worksurfaces: Cascade edge option removed from invalid sizes.
Worksurfaces: Fixed animation property for corner stretching.
Worksurfaces: Restricted wireway option on the key conference end when not attached to eliminate bad parts.
Worksurfaces: Crash no longer occurs when stretching the countertop.
Worksurfaces: Pael stretching blocked when countertop is connected to multiple panels, similar to spanning stacks.
Worksurfaces: Removed wood as an option on 54”x54” corner worksurfaces.
Zody: Animation properties added to all Zody guest chairs.
Version 4.2.0 (November 18, 2013)
Beside: 42" width is blocked when placing or stretching single base units when the base unit's layout is unavailable in that width.
Beside: Locks can now be added to overhead storage units with doors.
Beside: Storage top can be stretched to 54" and 66". Note that 106" is not an available width.
Beside: Storage top part number updates correctly for older drawings.
Beside: Upper storage section in toolbox has "Display invalid position in red" option to turn off displaying overhead storage in red if position is invalid.
Canvas: First time installs should no longer start Canvas with $ signs in tab names.
Canvas: Fixed crash when exporting to SIF from Reconfig Tool.
Canvas: Labels for elevation views now export to DWG with the elevation.
Compose: Added warning message when the number of PDAs in a panel exceeds 3.
Compose: All bezels in non-technology tiles will be added to calculations.
Compose: Base infeeds cannot be placed if there is no raceway cover.
Compose: "Change to Glass Stack" button now correctly changes solid stack to glass stack.
Compose: Corrected graphics for auto-placed benching cantilevers.
Compose: Default catalog is HHN for top trim on Compose panels and HBC for top trim on Compose Benching panels.
Compose: End trim displays correctly after stretching height of glass stacks.
Compose: Glass frame base without raceway shows correct graphics.
Compose: Glass stacks no longer stretch past 96".
Compose: Item tags for blank receptacle and blank data covers are now turned off.
Compose: Moved the slats in slat tiles to show less of the interior of the panel in higher resolutions.
Compose: PLeg adjusts to depth of the worksurface it is attached to. Sizes can be selected when Freeplace without "Worksurface Required" option selected.
Compose: Receptacle symbols no longer float away from the panel when data ports are placed in the same location.
Compose: Spanning End Panel no longer attaches to front of worksurfaces.
Compose: Tiles on Compose frame can be segmented without regard to stack frame locations.
Compose: Validation message is displayed if a shared benching cantilever is placed in a non-shared location.
Compose: Warning message displayed when attempting to create a tech tile in an invalid location.
Enclose: Applying new PowerBase infeeds defaults to the largest length available.
Enclose: Cuttable sides of panels should now stay within the frame when the other end is stretched.
Enclose: Muntin animations should no longer erroneously operate on Glass Filler Fins.
Enclose: Updating Ceiling Height from the Properties Scheme now correctly updates glass pane sizes.
Enclose: Walls that have had conventional electrical applied automatically adapt when changed to a wall type that doesn't support electrical.
Enclose / Enclose Frameless Glass: Added an invalidation to indicate when doors are attached to a disallowed starter.
Enclose / Enclose Frameless Glass: Calculations to determine valid tile heights should now be more accurate.
Enclose Frameless Glass: Calculations of Equal Sized Glass show now be correct.
Enclose Frameless Glass: Changed "Silicon" to "Silicone".
Enclose Frameless Glass: EFG doors are now called out as such in elevation descriptions.
Enclose Frameless Glass: The Bottom Horizontal reveal and Glazing Levelers are now plastic instead of powdercoat.
Enclose Frameless Glass: T-mounting an EFG wall to an Enclose panel now utilizes an Enclose Off-Module T-Mount.
Orlando: Grommet part number corrected.
Reside: Chairs no longer replicate when placing near a Reside worksurface.
Reside: Changing handedness no longer causes connected Beside base units to disappear.
Reside: "Delete" button in Reside Brackets and Supports will remove any item available in that section.
Reside: Part number for Reside Rectangular Worksurface is correct for older drawings.
Reside: Separate item tags show for the worksurface and legs.
Reside: Top feed stays in correct position when copied.
Reside: Utility tray will auto-size when placed when length in Animation Properties (blue box) is not locked.
Reside: Worksurfaces no longer attempt to connect to Generic Storage shelving, which caused crashing.
UniGroup Too: Crash no longer occurs when placing intersecting UniGroup Too panels.
V-Series: Removed "executive" depth from single-pedestal desk.
V-Series: Removed "wood front" option from pedestal.
Walls - Various allocation calculations have been updated.
Worksurfaces: Added "90 Degree" to worksurfaces where product said "90 deg."
Worksurfaces: Both Split Top surfaces are now in the clickable area.
Worksurfaces: Chairs now snap to the rectangular swell & inverse swell.
Worksurfaces: "Compose End-of-Run" wireway option removed when not available at current size.
Worksurfaces: Flush Mount Plates have been rotated.
Worksurfaces: Irrelevant snap points are now hidden.
Worksurfaces: Pedestal will now attach to wrap-around transitional worksurface.
Worksurfaces: Pedestals no longer attach to the back of 120-degree worksurface.
Worksurfaces: Pedestals no longer attach to Split Top Worksurface.
Worksurfaces: Show Animation Properties (blue box) when stretching.
Worksurfaces: Show material change tool in 2D.
Worksurfaces: Supports can be added to a drawing without having to be connected to a worksurface by using the "Free Place w/o Worksurface Required" checkbox.
Worksurfaces: Wedge worksurface edge corrected.
X-Series: 2D for the Corner Desk have been corrected.
X-Series: 2D only shows the Common Top material if Common Top is used.
X-Series: Changed Quick Property (green box) order to be more consistent.
X-Series: Corner worksurface size matches base in 42" and 48".
X-Series: Credenzas now show the "touch latch" option.
X-Series: Desks no longer try to attach their front to corner sides.
X-Series: Fixed possible crash when loading certain drawings with lateral files.
X-Series: Laminate top grain direction changed.
X-Series: Part number for Pedestal with tug and cushion corrected.
X-Series: Pedestal now remembers the last selected drawer configuration.
X-Series: Perforation Style now updates when the front changes.
X-Series: Removed material options from Animation Properties (blue box) and Quick Properties (green box).
X-Series: The range of heights for the JAKA height adjustment kit has been corrected.
X-Series: Top Laminate Scheme issue corrected.
X-Series: Updated the 2D for Personal Storage Towers to show door swing.
X-Series: Vertical Storage Units now snap to Desk Shell.
X-Series: "Wood Lockbar" option only shows for Pedestal.
Version 4.0.47 (October 21, 2013)
Beside: Beside Base unit no longer causes crash.
Canvas: Schemes now apply to blocks.
Compose: 4-Way Connector now gets proper amount of finishes to Lynx.
Compose: Corrected article codes for powered panels to correctly detect a lack of PDA at raceway.
Compose: End of run trim for Compose Sliding Glass Door and adjacent panels is displayed correctly.
Compose: Field Porting option available when placing receptacles. Will check for valid tech tile locations when field porting option is not chosen.
Compose: Filler post error message removed. Extra graphics in 2D removed.
Compose: Frameless glass gets correct number when next to a corner.
Compose: Horizontal Light block Ind. Tag shows Panel Type in Calculations.
Compose: Minimum stretch width set to 30 inches when an infeed is located on the right side of a panel.
Compose: Multiple item tags will be created for spanning top trim.
Compose: Premise, UniGroup, UniGroup Too, and Places can no longer attach to Compose.
Compose: Receptacle and Data blank cover only show in Electrical Accessory Text in paper view. Blank covers get 1 item tag per cover in this new view.
Compose: Special 8" Glass Stack option added to Green Dialog box.
Compose: Top Trim Kits added to calculations when a glass frame or glass stack has steel top trim.
Compose: User tech tile choice is preserved when adding receptacles.
Enclose / Enclose Frameless Glass: TFL (Melamine) tiles have been added to the product offering.
Enclose Frameless Glass: Glass labels on Layouts will now align with those on the Glass Contractor Report.
Enclose Frameless Glass: The Interconnection Detail tool should work for the EFG Fly-By again.
Enclose: Details have been updated.
Enclose: Glass sliding slab door doesn't have duplicate information about plinth
Enclose: Picklist items that are required to use Pitch finish are now allowed.
Enclose: The tool to remove muntins no longer appears to think the bottom rail is a muntin.
Enclose: Triplex color now shows up on panel type report.
Improv: Side Seating should no longer lack finishes when first placed.
Panel and Worksurface Accessories - The External Markerboard should no longer always sit on the floor.
Reside: Part numbers for Desk to Storage Bracket match price list.
Systems: Sliding doors now correctly indicate their handedness in the Panel Type label. Matches spec guide.
UniGroup: UniGroup and Places glazed door part number for door swing matches the specification guide. In the green box, Door Swing - Right will determine the side of the door swing.
UniGroup: Wainscot with Classic Muntins part number matches price list.
UniGroup: Wall Track material will pass validation.
Work Tools and Accessories: The Jump Stuff Paper Sorter should no longer try to spec a slat tile bracket finish when not slat-tile mounted.
Worksurfaces: Adjustable and Steel options are saved when a user places a Compose P-Leg.
Worksurfaces: Compose will default to the HHK catalog, Compose Benching to HBC, Premise to HAN, and UniGroup/UniGroup Too/Places to HAW.