References for the Supplemental Text Material
  1. Acosta- Meejia, C. J. (1999), “Improved P Charts to Monitor Process Quality”, IIE Transactions, Vol. 31, pp. 509-516.
  2. Aerne, L. A., Champ, C. W., and Rigdon, S. E. (1991), “Evaluation of Control Charts Under Linear Trend”, Communications in Statistics: Theory and Methods, Vol. 20, No. 10, pp. 3341-3349.
  3. Andrews, H. P. (1964). “The Role of Statistics in Setting Food Specifications”, Proceedings of the Sixteenth Annual Conference of the Research Council of the American Meat Institute, pp. 43-56. Reprinted in Experiments in Industry: Design, Analysis, and Interpretation of Results, eds. R. D. Snee, L. B. Hare and J. R. Trout, American Society for Quality Control, Milwaukee, WI 1985.
  4. Bain, L. J., and Engelhardt, M. (1987), Introduction to Probability and Mathematical Statistics, 2nd edition, PWS-Kent, Boston, MA.
  5. Barton, R. R. (1997). “Pre-experiment Planning for Designed Experiments: Graphical Methods”, Journal of Quality Technology, Vol. 29, pp. 307-316.
  6. Barton, R. R. (1998). “Design-plots for Factorial and Fractional Factorial Designs”, Journal of Quality Technology, Vol. 30, pp. 40-54.
  7. Barton, R. R. (1999). Graphical Methods for the Design of Experiments, Springer Lecture Notes in Statistics 143, Springer-Verlag, New York.
  8. Baxley, R. V., Jr. (1995), “An Application of Variable Sampling Interval Control Charts”, Journal of Quality Technology, Vol. 27, pp. 275-282.
  9. Bishop, T., Petersen, B. and Trayser, D. (1982). “Another Look at the Statistician’s Role in Experimental Planning and Design”, The American Statistician, Vol. 36, pp. 387-389.
  10. Bissell, D. (1994), Statistical Methods for SPC and TQM, Chapman and Hall, London.
  11. Box, G. E. P. and S. Jones (1992). “Split-Plot Designs for Robust Product Experimentation”. Journal of Applied Statistics, Vol. 19, pp. 3-26.
  12. Champ, C. W., and Rigdon, S. E. (1991), “A Comparison of the Markov Chain and the Integral Equation Approaches for Evaluating the Run Length Distribution of Quality Control Charts”, Communications in Statistics: Simulation and Computation, Vol. 20, No. 1, pp. 191-204.
  13. Champ, C. W., and Rigdon, S. E. (1997), “An Analysis of the Run Sum Control Chart”, Journal of Quality Technology, Vol. 29, pp. 407-417.
  14. Charnes, J. M., and Gitlow, H. S. (1995), “Using Control Charts to Corroborate Bribery in Jaialai”, The American Statistician, Vol. 49, pp. 386-389.
  15. Ciminera, J. L., and Lease, M. P. (1992), “Developing Control Charts to Review and Monitor Medication Errors”, Hospital Pharmacy, Vol. 27, p. 192.
  16. Czitrom, V., and Reece, J. E. (1997). “Virgin Versus Recycled Wafers for Furnace Qualification: Is the Expense Justified?” in V. Czitrom and P. D. Spagon (eds), Statistical Case Studies for Industrial Process Improvement, pp. 87-104, Society for Industrial and Applied Mathematics, Philadelphia, PA.
  17. David, H. A. (1951), “Further Applications of the Range to Analysis of Variance”, Biometrika, Vol. 38, pp. 393-407
  18. Davis, R. B., Homer, A., and Woodall, W. H. (1990), “Performance of the Zone Control Chart”, Communications in Statistics: Theory and Methods, Vol. 19, pp. 1581-1587.
  19. Dolezal, K. K., Burdick, R. K., and Birch, N. J. (1998), “Analysis of a Two-Factor R & R Study with Fixed Operators”, Journal of Quality Technology, Vol. 30, pp. 163-170.
  20. Duncan, A.J. (1955), “The Use of the Range in Computing Variabilities”, Industrial Quality Control, Vol. 9, No. 5, pp. 18-22. (Clarification and Further Comment, Vol. 11, No. 8, p. 70; Errata, Vol. 12, No. 2, p. 36).
  21. Finison, L. J., Spencer, M., and Finison, K. S. (1993), “Total Quality Measurement in Health Care: Unsing Individuals Charts in Infection Control”, pp. 349-359, in ASQC Quality Congress Transactions, ASQC, Milwaukee, WI.
  22. Grant, E. L. and Leavenworth, R. S. (1996), Statistical Quality Control, 7th Edition, McGraw-Hill, New York.
  23. Hahn, G. J. (1977). “Some Things Engineers Should Know About Experimental Design”, Journal of Quality Technology, Vol. 9, pp. 13-20.
  24. Hahn, G. J. (1984). “Experimental Design in a Complex World”, Technometrics, Vol. 26, pp. 19-31.
  25. Hamada, M., and Weerahandi, S. (2000), “Measurement Systems Assessment via Generalized Inference”, Journal of Quality Technology, Vol. 32, pp. 241-253.
  26. Herath, H. S. B., Park, C. S., and Prueitt, G. C. (1995), “Monitoring Projects using Cash Flow Control Charts”, The Engineering Economist, Vol. 41, pp. 27.
  27. Hinkley, D. V. (1970), “Inference About the Change-Point in a Sequence of Random Variables”, Biometrika, Vol. 57, pp. 1-17.
  28. Hogg, R. V., and Craig, A. T. (1978), Introduction to Mathematical Statistics, 4th edition, Macmillan, New York.
  29. Howarth, R. J. (1995), “Quality Control Charting for the Analytical Laboratory: Part 1. Univariate Methods”, Analyst, Vol. 120, pp. 1851-1873.
  30. Hunter, W. G. (1977). “Some Ideas About Teaching Design of Experiments With 25 Examples of Experiments Conducted by Students”, The American Statistician, Vol. 31, pp. 12-17.
  31. Hurwicz, A., and Spagon P. D. (1997), “Identifying Sources of Variation in a Wafer Planarization Process”, in V. Czitrom and P. D. Spagon (eds), Statistical Case Studies for Industrial Process Improvement, pp. 105-144, Society for Industrial and Applied Mathematics, Philadelphia, PA.
  32. Jaehn, A. H. (1987), “Zone Control Charts – SPC Made Easy”, Quality, Vol. 26 (October), pp. 51-53.
  33. Jin, C., and Davis, R. B. (1991), “Calculation of Average Run lengths for Zone Control Charts With Specified Zone Scores”, Journal of Quality Technology, Vol. 23, pp. 355-358.
  34. Klein, M. (2000), “Two Alternatives to the Shewhart Control Chart”, Journal of Quality Technology, Vol. 32, pp. 427-431.
  35. Leon, R. V., A. C. Shoemaker and R. N. Kackar (1987). “Performance Measures Independent of Adjustment”. Technometrics, Vol. 29, pp. 253-265
  36. Levey, S., and Jennings, E. R. (1992), “Historical Perspectives: The use of Control Charts in the Clinical Laboratory”, Archives of Pathology and Laboratory Medicine, Vol. 116, pp. 791-798.
  37. Luko, S. N. (1996), “Concerning the Estimators andin Estimating Variability in a Normal Universe”, Quality Engineering, Vol. 8, No. 3, pp. 481-487.
  38. Montgomery, D. C., Peck, E. A., and Vining, G. G. (2012), Introduction to Linear Regression Analysis, 5thedition, John Wiley & Sons, new York.
  39. Montgomery, D.C. and Runger, G.C. (2011), AppliedStatistics and Probability for Engineers, 5th edition, John Wiley & Sons, New York.
  40. Myers, R. H., and Milton, J. S. (1991), A First Course in the Theory of Linear Statistical Models, PWS-Kent, Boston, MA.
  41. Nelson, L. S. (1975), “Use of the Range to Estimate Variability”, Journal of Quality Technology, Vol. 7, pp. 46-48.
  42. Ott, E. R. (1947), “An Indirect Calibration of an Electronic Test Set”, Industrial Quality Control, Vol. 3, No. 4, pp. 11-14.
  43. Park, C., and Reynolds, M. R., Jr. (1994), “Economic Design of a Variable Sample Size Chart” Communications in Statistics: Simulation and Computation, Vol. 23, pp. 467-483.
  44. Patnaik, P. R. (1950), “The Use of the MeanRange as an Estimator of Variance in Statistical Tests”, Biometrika, Vol. 37, pp. 78-87.
  45. Prabhu, S. S., Montgomery, D. C., and Runger, G. C. (1997), “Economic-Statistical Design of an Adaptive Chart”, International Journal of Production Economics, Vol. 49, pp. 1-15.
  46. Quinlan, J. (1985). “Product Improvement by Application of Taguchi Methods”. Third Supplier Symposium on Taguchi Methods, American Supplier Institute, Inc., Dearborn, MI.
  47. Reynolds, J. H. (1971), “The Run Sum Control Chart Procedure”, Journal of Quality Technology, Vol. 3, pp. 23-27.
  48. Roberts, S. W. (1966), “A Comparison of Some Control Chart Procedures”, Technometrics, Vol. 8, pp. 411-430.
  49. Rodriguez, R. N. (1996), “Health Care Applications of Statistical Process Control: Examples using the SAS System”, pp. 1381-1396, in Proceedings of the 21st SAS Users Group Conference, SAS Users Group International, Cary, NC.
  50. Roes, K.C.B., and Roes, R. J. M. M. (1995), “Shewhart-Type Charts in Nonstandard Situations (with discussion).” Technometrics, Vol. 37, pp. 15-40
  51. Runger, G. C., and Fowler, J. W. (1998). “Run-to-Run Control Charts with Contrasts.” Quality and Reliability Engineering International, Vol. 14, pp. 262-272.
  52. Runger, G. C., and Montgomery, D. C. (1993), “Adaptive Sampling Enhancements for Shewhart Control Charts”, IIE Transactions, Vol. 25, pp. 41-51.
  53. Ryan, T. P, and Schwertman, N. C. (1997), “Optimal Limits for Attributes Control Charts”, Journal of Quality Technology, Vol. 29, pp. 86-98.
  54. Samuel, T. R., Pignatiello, J. J., Jr., and Calvin, J. A. (1998), “Identifying the Time of a Step Change with Control Charts”, Quality Engineering, Vol. 10, pp. 521-527.
  55. Schilling, E. G. (1978), “A Lot Sensitive Sampling Plan for Compliance Testing and Acceptance Inspection”, Journal of Quality Technology, Vol. 10, pp. 47-51.
  56. Schwertman, N. C., and Ryan, T. P (1997), “Implementing Optimal Attributes Control Charts”, Journal of Quality Technology, Vol. 29, pp. 99-104.
  57. Shore, H. (2000), “General Control Charts for Attributes”, IIE Transactions, Vol. 32, pp. 1149-1160.
  58. Sullivan, J. H., and Woodall, W. H. (1996), “A Comparison of Control Charts for Individual Observations”, Journal of Quality Technology, Vol. 28, pp. 398-408.
  59. Tagaras, G. (1998), “A Survey of Recent Developments in the Design of Adaptive Control Charts”, Journal of Quality Technology, Vol. 30, pp. 212-231.
  60. Tippett, L. H. C. (1925), “On the Extreme Individuals and the Range in Samples Taken from a Normal Population”, Biometrika, Vol. 17, pp. 364-387.
  61. Wheeler, D. J. (1995), Advanced Topics in Statistical Process Control, SPC Press, Knoxville, TN.
  62. Woodall, W. H., and Montgomery, D. C. (2000-01), “Using Ranges to Estimate Variability”, Quality Engineering, Vol. 13, pp. 211-217.
  63. Yashchin, E. (1994), “Monitoring Variance Components” Technometrics, Vol. 36, pp. 379-393.
  64. Zimmer, L. S., Montgomery, D. C., and Runger, G. C. (1998), “A Three-State Adaptive Sample Size Control Chart”, International Journal of Production Research, Vol. 36, pp. 733-743.
  65. Zimmer, L. S., Montgomery, D. C., and Runger, G. C. (2000), “Guidelines for the Application of Adaptive Control Charting Schemes”, International Journal of Production Research, Vol. 38, pp. 1977-1992.

1