Section 00000
Security Access and Surveillance
Honeywell video SYSTEMS RAPID EYE™ MULTI-MEDIA LT, DIGITAL RECORDING AND TRANSMISSION SYSTEM
PART 1 – GENERAL
The intent of this document is to specify the minimum criteria for the design, supply, installation, and commissioning of this Digital Recording and Transmission System.
1.01 SUMMARY
A. The Digital Recording and Transmission System shall provide a powerful, intelligent enterprise-class, digital storage management tool that combines capabilities for Video, Audio, and Data in a single Recorder Unit (RU).
1.02 REFERENCES
A. Canadian Standards Association (CSA)
B. Conformity for Europe (CE)
C. Consultative Committee for International Radio (CCIR)
D. Electronic Industry Association (EIA)
E. Federal Communications Commission (FCC)
F. National Television System Committee (NTSC)
G. Phase Alternation by Line (PAL)
H. Underwriters Laboratories Inc. (UL)
1.03 DEFINITIONS
A. No Substitutes: The exact make and model number identified in this specification shall be provided without exception.
B. Or Equal: Any item may be substituted for the specified item provided that in every technical sense, the substituted item provides the same or better capability and functionality.
C. Or Approved Equal: A substitute for the specified item may be offered for approval by the Owner. The proposed substitution must provide the same or better capability and functionality, in every technical sense, as the specified item. Such requests for approval shall be submitted in accordance with the provisions of PART 1.05 – SUBMITTALS, and must be obtained within the time frames outlined.
1.04 SYSTEM DESCRIPTION
A. The Digital Recording and Transmission System shall provide a powerful, intelligent enterprise-class digital storage management tool that combines Video, Audio, and Data capabilities in a single RU. The system shall be designed to record, search, and transmit Video, Audio, and Data transactions, providing operators with both live and post-event assessment options. The Digital Recording and Transmission System must be available in a minimum of thirty-for (34) different configurations, allowing the operator to select the right RU for every application.
1.05 SUBMITTALS
A. General: Submittals shall be made in accordance with the Conditions of the Contract and Submittal Procedures Section.
B. Shop Drawings and Schematics: Shall depict the Digital Recording and Transmission System in final proposed “as built” configuration. The following must be provided:
1. Connection diagrams for interfacing equipment.
2. List of connected equipment.
3. Locations for all major equipment components to be installed under this specification.
C. Product Data: The following shall be provided:
1. Technical data sheets.
2. A complete set of instruction manuals.
D. Quality Assurance Submittals: The following shall be submitted:
1. Checkout Report: The Contractor shall provide the Owner with a checkout report for each Digital Recording and Transmission System. The report shall include:
a. A complete list of every device.
b. The date at which every device was tested, and by whom.
c. If device are retested, the date at which each device was retested, and by whom.
d. A final report indicating that every device was tested successfully.
2. Manufacturer’s Instructions: The Contractor shall deliver TBD sets of System Operation and Maintenance Manuals (if available) to the Owner.
3. Notice of Completion: When the final acceptance has been satisfactorily completed, the Owner shall issue a notice of completion to the Contractor.
1.06 QUALITY ASSURANCE
A. Manufacturer’s Qualifications: The Digital Recording and Transmission System manufacturer shall be the world’s largest and most experienced manufacturer of electronic security systems, with over seventy years of experience in the security industry. The Digital Recording and Transmission System must be assembled in the U.S.A., and the manufacturer shall provide technical assistance 24/7 and supported via a toll-free telephone number, at no extra charge.
1.07 DELIVERY, STORAGE, AND HANDLING
A. General: Delivery, storage, and handling of the Digital Recording and Transmission System shall be in accordance with the manufacturer’s recommendations.
B. Ordering: The manufacturer’s ordering instructions and lead-time requirements must be followed in order to avoid installation delays.
C. Delivery: The Digital Recording and Transmission System shall be delivered in the manufacturer’s original, unopened, undamaged container with identification labels intact.
D. Storage and Protection: The Digital Recording and Transmission System shall be stored and protected from exposure to harmful weather conditions and at the environmental conditions recommended by the manufacturer.
1.08 PROJECT CONDITIONS
1.09 SEQUENCING
1.10 SCHEDULING
1.11 WARRANTY
A. General: The warranty period shall be a minimum of thirty-six (36) months from the manufacture date code under normal use and service. The warranty period for hard drives shall be a minimum of twelve (12) months from date of manufacture.
1.12 MAINTENANCE
A. Preventative Maintenance Agreement During Warranty: As a separate price item, the Contractor shall provide preventative maintenance during the warranty period. Maintenance shall include, but no be limited to:
1. Labor and materials, at no additional cost, to repair Digital Recording and Transmission System RU.
2. Labor and materials, at no additional cost, to provide test and adjustments to the Digital Recording and Transmission System RU.
3. Regular inspections.
B. Preventative Maintenance Agreement: As a separate price item, the Contractor shall provide a complete Maintenance Agreement for a period of TBD months after the conclusion of the warranty period. The Maintenance Agreement shall include, but not be limited to:
1. Labor and materials, at no additional cost, to repair Digital Recording and Transmission System RU.
2. Labor and materials, at no additional cost, to provide test and adjustments to the Digital Recording and Transmission System RU.
3. Regular inspections.
1.13 TRAINING
A. Operator training shall be conducted for a minimum session length of TBD hours at the customer’s site.
B. Training shall include, but not be limited to Digital Recording and Transmission System operation and diagnostics.
PART 2 – PRODUCTS
2.01 MANUFACTURED RECORDER UNITS
A. Model Number/Descriptions Table
RU Model Numbers
HRM420N200 / RU, REMM 4 CAM, 20 IPS, N, 200 CAMDAYS, LAN/PSTNHRM420N400 / RU, REMM 4 CAM, 20 IPS, N, 400 CAMDAYS, LAN/PSTN
HRM420N600 / RU, REMM 4 CAM, 20 IPS, N, 600 CAMDAYS, LAN/PSTN
HRM420N800 / RU, REMM 4 CAM, 20 IPS, N, 800 CAMDAYS, LAN/PSTN
HRM420N1250 / RU, REMM 4 CAM, 20 IPS, N, 1250 CAMDAYS, LAN/PSTN
HRM420N2000 / RU, REMM 4 CAM, 20 IPS, N, 2000 CAMDAYS, LAN/PSTN
HRM440N400 / RU, REMM 4 CAM, 40 IPS, N, 400 CAMDAYS, LAN only
HRM440N600 / RU, REMM 4 CAM, 40 IPS, N, 600 CAMDAYS, LAN only
HRM440N800 / RU, REMM 4 CAM, 40 IPS, N, 800 CAMDAYS, LAN only
HRM440N1250 / RU, REMM 4 CAM, 40 IPS, N, 1250 CAMDAYS, LAN only
HRM440N2000 / RU, REMM 4 CAM, 40 IPS, N, 2000 CAMDAYS, LAN only
HRM420CD200 / RU, REMM 4 CAM, 20 IPS, CD, 200 CAMDAYS, LAN/PSTN
HRM420CD400 / RU, REMM 4 CAM, 20 IPS, CD, 400 CAMDAYS, LAN/PSTN
HRM420CD600 / RU, REMM 4 CAM, 20 IPS, CD, 600 CAMDAYS, LAN/PSTN
HRM420CD800 / RU, REMM 4 CAM, 20 IPS, CD, 800 CAMDAYS, LAN/PSTN
HRM420CD1250 / RU, REMM 4 CAM, 20 IPS, CD, 1250 CAMDAYS, LAN/PSTN
HRM420CD2000 / RU, REMM 4 CAM, 20 IPS, CD, 2000 CAMDAYS, LAN/PSTN
HRM440CD400 / RU, REMM 4 CAM, 40 IPS, CD, 400 CAMDAYS, LAN only
HRM440CD600 / RU, REMM 4 CAM, 40 IPS, CD, 600 CAMDAYS, LAN only
HRM440CD800 / RU, REMM 4 CAM, 40 IPS, CD, 800 CAMDAYS, LAN only
HRM440CD1250 / RU, REMM 4 CAM, 40 IPS, CD, 1250 CAMDAYS, LAN only
HRM440CD2000 / RU, REMM 4 CAM, 40 IPS, CD, 2000 CAMDAYS, LAN only
HRM920N400 / RU, REMM 9 CAM, 20 IPS, N, 400 CAMDAYS, LAN/PSTN
HRM920N600 / RU, REMM 9 CAM, 20 IPS, N, 600 CAMDAYS, LAN/PSTN
HRM920N800 / RU, REMM 9 CAM, 20 IPS, N, 800 CAMDAYS, LAN/PSTN
HRM920N1250 / RU, REMM 9 CAM, 20 IPS, N, 1250 CAMDAYS, LAN/PSTN
HRM920N2000 / RU, REMM 9 CAM, 20 IPS, N, 2000 CAMDAYS, LAN/PSTN
HRM940N400 / RU, REMM 9 CAM, 40 IPS, N, 400 CAMDAYS, LAN only
HRM940N600 / RU, REMM 9 CAM, 40 IPS, N, 600 CAMDAYS, LAN only
HRM940N800 / RU, REMM 9 CAM, 40 IPS, N, 800 CAMDAYS, LAN only
HRM940N1250 / RU, REMM 9 CAM, 40 IPS, N, 1250 CAMDAYS, LAN only
HRM940N2000 / RU, REMM 9 CAM, 40 IPS, N, 2000 CAMDAYS, LAN only
HRM920CD400 / RU, REMM 9 CAM, 20 IPS, CD, 400 CAMDAYS
HRM920CD600 / RU, REMM 9 CAM, 20 IPS, CD, 600 CAMDAYS
HRM920CD800 / RU, REMM 9 CAM, 20 IPS, CD, 800 CAMDAYS
HRM920CD1250 / RU, REMM 9 CAM, 20 IPS, CD, 1250 CAMDAYS
HRM920CD2000 / RU, REMM 9 CAM, 20 IPS, CD, 2000 CAMDAYS
HRM940CD400 / RU, REMM 9 CAM, 40 IPS, CD, 400 CAMDAYS
HRM940CD600 / RU, REMM 9 CAM, 40 IPS, CD, 600 CAMDAYS
HRM940CD800 / RU, REMM 9 CAM, 40 IPS, CD, 800 CAMDAYS
HRM940CD1250 / RU, REMM 9 CAM, 40 IPS, CD, 1250 CAMDAYS
HRM940CD2000 / RU, REMM 9 CAM, 40 IPS, CD, 2000 CAMDAYS
Software Model Numbers
HRM62ONEAD / ONEADMIN & VIEW Software CD & Operator ManualsHRM62ADMIN / ADMIN & VIEW Software CD & Operator Manuals
HRM62VIEW / VIEW Software CD & Operator Manual
HRM62UPADMIN / ADMIN & VIEW Upgrade Software CD
HRM62CLIP / Clip Player for Windows
Accessory Model Numbers
AAC232/485 / Code Converter, RS232 to RS485ACSP1 / Camera Surge Protector, Power and Video
ADSP1 / Dome Surge Protector, Power, Video, and Data
ASP16 / RU Surge Protector, Battery Backup
AVBPITPOS / Single Port PIT, POS, RS232/RS232
AVBPIT4POS / Four Port PIT, POS, RS232/RS232
2.02 SYSTEM PERFORMANCE
A. The Digital Recording and Transmission System shall include, as a minimum, the following features/functions/specifications:
1. The Digital Recording and Transmission System manufacturer must be the world’s largest and most experienced manufacturer of electronic security systems, with over seventy years of experience in the security industry.
2. The Digital Recording and Transmission System must be protected by the most extensive support services in the industry, including Customer Service, Pre-Sales Applications Assistance, After-Sales Technical Assistance, access to Technical Online Support, and Online Training using web conferencing. The Digital Recording and Transmission System must be manufactured in the U.S.A., and the manufacturer shall provide 24/7 technical assistance and support via a toll-free telephone number at no extra charge.
3. The Digital Recording and Transmission System shall provide a powerful, intelligent enterprise-class digital storage management tool that combines Video, Audio, and Data capabilities in a single RU. This system must be designed to record, search, and transmit Video, Audio, and Data transactions, both live and post-event.
4. The Digital Recording and Transmission System’s defaultpriority shall be to capture and store video, audio, data, and alarms. The system must be configurable to prioritize live viewing and retrieval of video if required.
5. The Digital Recording and Transmission System shall be compatible with most existing and new video equipment and incorporate into any TCP/IP or dialup network. Communication options shall include LAN, WAN, Internet, and PSTN (PSTN model dependent), all utilizing the system’s standard equipment, without the need for additional hardware. Compatibility with ISDN and DSL must be supported using additional hardware. The system shall allow for retrieval of system files, and remote software upgrades, utilizing any of the communication options. Simultaneous multiple connections utilizing different network and/or communication types shall be supported.
6. The Digital Recording and Transmission System shall utilize an authenticated proprietary file format (REM) for integrity of evidence.
7. The Digital Recording and Transmission System shall allow the operator to regulate the data rate, defining the size, frequency, and threshold. This shall allow smaller blocks of data to pass unhindered by larger blocks of data, and ensure that images and system messages are delivered as quickly as possible within the capabilities of the network’s available bandwidth.
8. The Digital Recording and Transmission System and its components shall be thoroughly tested before shipping from the manufacturer’s facility.
9. The system shall consist of three (3) components:
a. Recorder Unit
b. Software for administrating operators on a single site database (ONEADMIN) or upgradeable to multiple site database capability using (ADMIN).
c. Software to view video (VIEW) from a Recorder Unit.
B. The RU shall include, as a minimum, the following features/functions/specifications:
1. The RU’s operating system shall be designed for areal-time, distributed environment that is: secure, stable, networked, and multi-tasking. Use of the VxWorks™ operating system meets and exceeds this specification. Operating systems that are not designed for real-time operations, such as Microsoft Windows®, are No Substitute and thus not acceptable for the RU.
2. The RU shall be offered in a minimum of thirty four (34) configurations, allowing the Owner a choice of: size of HD for the storage of video, audio and data, capture rate (ips) and units with a CD-RW drive will offer the option of recording incident clips of video, audio and data to a CD-R, using the RU. Cameras connected to an RU must be of the same standard: either NTSC or PAL; not both at once. The RU can be configured to use either video standard and operate on either 115VAC or 230VAC.
3. The RU shall be engineered for durability and expandability, and be of a rugged, modular design, suited for desktop installation or sitting on a shelf in a rack-mount installation.
4. The RU shall record in a continuous mode (circular buffer), offering a choice of three (3) different resolutions (NTSC) selectable on a per camera basis; 160 x 120, 320 x 240 or 640 x 240. The recording format shall feature 24-bit true color with over sixteen (16) million colors, in YCrCb 4:2:0, in a modified H.261/263 Discrete Cosine Transformation (DCT) format, with proprietary Dual Threshold processing, yielding high quality with low bit rate.
5. The RU shall offer proprietary, long-term, digital storage for recorded Video, Audio, and Data. The RU must be available in 200, 400, 600, 800, 1250 and 2000 camera day versions. The actual duration of the video archive will depend on unit settings. Software for operating the unit shall report an estimate of the length of the video archive in an easily grasped unit such as ‘camera-day’ (Nominal Capacity) and calendar day (Estimated Capacity). The manufacturer’s web site shall include a storage calculator for estimating the number of days of video that an RU model will archive, based upon that model’s storage capacity, number of camera signals that plan to be recorded, the planned update rate (ips), planned resolution and planned quality settings, planned scheduling of recording, and whether recording of motion detection, audio are enabled or disabled.