Address: Prasadham,Holly cross nagar
Nagercoil,Kanya kumari Dist,
Pin-629004 / Mobile: +965-55162399(Kuwait)
E-Mail:
Academia
B.Tech. (Mechanical Engineering) from Noorul Islam College of Engineering in 2009 with 72%.(Tamil Nadu)
H.S.C. from Good Shepherd Matriculation Higher Secondary School in 2005 with 84.67%.(Tamil Nadu)
S.S.L.C. from in Good Shepherd Matriculation Higher Secondary School 2003 with 82.81%.(Tamil Nadu) / Vision Statement
Aspires to pursue challenging assignments in Quality Assurance/ Quality Control Engineering with a frontline organization.
Professional Summary
ð A hardworking & dedicated Mechanical Engineer graduate from Noorul Islam College of Engineering.
ð Ability to manage technically advanced cost-efficient, state of art Maintenance Systems & Processes.
ð Capable of handling the construction and quality control activities as specified in the drawings and applicable standards and specifications.
ð Gained exposure in conceptualizing & effecting process initiatives to enhance Quality in Products.
ð Honed the skills by completing engineering projects.
ð Efficient communicator with strong negotiation, problem resolution & client need assessment aptitude.
ORGANIZATIONAL EXPERIENCE
1) AYOKI CEMBOL ERECTORS PVT LTD (JAYPEE CEMENTS, Mundra, Gujarat)
Junior Engineer (From June 2009-July 2010)
Role:
© Carry out Inspection works at site as per ITP Approved at Site
© Maintaining Calibration Records of Measuring Instruments
© Knowledge on Materials and Welding Practices
© Coordinating with Third Party/Clients during all Inspections
© Inspection such as Gauge Passing ,Load transfer, welding parameters monitoring during erection of ESP
© Alignment of Crusher,ID Fan , Bag house ,Preheater of Cement Plant
© Final weld inspection
© To make documents like Fit up & Weld visual report, Erection protocol.
© Knowledge & Skill to read Engg Drawings
2) THYSSENKRUPP INDUSTRIES INDIA PVT LTD),Pune
QA/QC Engineer (From Aug 2010 to Jan 2013)
PROJECT 1: SHOP FABRICATION INSPECTION-PUNE (Pimpri).
PROJECT 2: COASTAL ENERGEN PVT LTD, 2X600 MW MUTIARA THERMAL PROJECTS (MHE)
(From NOVEMBER 2010-JANUARY 2013) .
Role:
§ Inspection of incoming materials.
§ Monitor and maintain control records for welding consumable and welder performance record.
§ Inspect structural fit-ups, alignment and visual inspection of all welds.
§ Blasting and painting inspection as per Norms and Standards.
§ Carrying Welder’s Qualification Tests.
§ Ensure implementation of Quality Control Plans and procedures.
§ Fit up inspection, Welding Inspection Before, during & after Welding.
§ Weld consumable control, Final dimensional inspection.
§ Review of Isometric Drawings & ensure Approved WPS as well as Qualified welders are available.
§ Co-ordination with Client inspector for daily welding activities and for stage inspection.
§ Maintain & update all quality related documents at site.
§ Day to day planning and Coordination of QA/QC Activities at Site
§ Review of RT Reports and NDT activities at Site
§ Expertise in Installation of Rotary Equipments like Stacker Cum Reclaimer(1400 TPH Cap), Ring Granulator, Vibrating Grizziling Feeder, Paddle Feeder, Travelling Tripper
2) TRUST FACTORY, KUWAIT
QA/QC Inspector (From Jan 2013 to till)
PROJECT 1(Represented Larsen and Toubro Kuwait Constructions/AGC): NEW GC-16 PROJECT, Client: KOC, KUWAIT
PROJECT 2(Worked for Hanwha Engineering and Construction/Mouchel): UM AL-AISH LPG NEW FILLING PLANT PROJECT, Client: KOTC, KUWAIT
PROJECT 3(Working for HHI /FICHTNER): Az Zour North Phase 2 Project-IWPP, Client: Az Zour, KUWAIT
PROJECT4 (ARABIANENERTECH/KOC) : INSTALLATION OF NEW FIRE WATER TANK AT GC 17,27 & 28
Roles:
§ Fit-up checks, Weld visual and independent handling of fabrication shops for CS, SS and LTCS using various welding process like GTAW, SMAW, SAW, FCAW, etc at various periods of time
§ Ensure site fabrication facilities are in line with Qc requirements
§ Organize and conduct welder’s qualification test as per ASME Section IX and client specification
§ Visual Inspection of pipe fit up and weld joints and reject/accept as per acceptance criteria of ASME B 31.3
§ Visual Inspection of structural members fit up and weld joints as per acceptance criteria of AWS D 1.1
§ Check final dimension, material traceability, orientation and cleanliness after completion of pipe spool fabrication/structural members
§ Ensuring fulfillment of all Inspection and Test requirements at all stages as per the approved ITP, QCP and contractual requirements.
§ Ensure that applicable approved WPS, Qualified welders, Calibrated equipments are available prior to start of job, based on inputs from project drawings
§ Identification of various inspection requirements of each job from Specifications, ITP’s, etc and coordinate for site implementation by arranging resources
§ In process inspection of welding (Pre-heat / inter-pass maintenance, adherence of weaving width, root inspection, etc)
§ Maintenance of records like welder performance, repair percentage, status of NDT activities being carried out etc.
§ Monitored the Project activities with particular emphasis on Quality, Safety conformity to drawings, Specifications, Standards & Codes
§ Review the Test Packs and generate QC Inspection/ Release reports
§ Control and Trace all the materials related to the Project which include Site Materials and Welding Consumables
§ Supervise and Witness Non Destructive Testing and Inspection on castings according to ASME V code and witness the Hydro Test and Pneumatic Test, Painting Inspection, Holiday Testing, Blasting inspection.
§ Experience in API 653 TANK Construction at GC-17 and GC-28 (Welding and Painting)
CERTIFICATION
Ø ASNT Level II Certificate in:
§ RT (Radiographic Test).
§ UT (Ultrasonic Test).
§ MT (Magnetic Particle Test).
§ PT (Penetrant Test).
Ø TWI Certified Level-2 CSWIP 3.1 Welding Inspector (Certificate Number: 645331).
Ø NACE Certified Level-1 Coating Inspector (Certificate Number: 52516).
Ø API-650-Pursuing.
Ø KOC Approval Card(COATING SUPERVISOR) : (CTG-1858)
KNOWLEDGE PURVIEW
© Knowledge in Construction Drawings such Isometric, Equipment, Structural, GAD.
© Knowledge in SAP System
© Material Inspection, Dimensional Check and Documentation as per Construction Materials Standards such as ASTM / ASME,API, ISO, IS Standards
© Welding Procedure Qualification, Welder Qualification, Selection of Electrodes, Weld Visual Inspection, as per ASME Sections.
© Radiographic Interpretation of weld joints, Ultrasonic Inspection, Magnetic Particle Inspection and Penetrant Test, Reporting and Documentation.
© Fabrication of, Structure, Piping and other Equipments, Documentation of History Sheet, Test Pack Clearing, etc.
ACADEMIC PROJECTS
© Study on Third party logistics in 2008
PERSONAL DOSSIER
Name / S.P.PRASEESHDate of Birth / 29th SEP 1987
Sex / Male
Marital status / Single
Nationality / Indian
Permanent Address / Prasadham,Holly cross nagar
Nagercoil,Kanya kumari Dist,
Pin-629004
Languages / English, Hindi, Tamil & Malayalam
Passport No / R7728598
Civil Id Number / 287092905544
Declaration
I hereby declare that all the information given above are true and correct with the best of my knowledge and I bear the responsibility of the above-mentioned particulars.