PRODUCT SPECIFICATIONS For
PRODUCT SPECIFICATIONS for MULTI-TIER METAL SIDEARM LOCKERS
Manufacturers
The products listed herein are based on a specific manufacturer to establish a standard of quality and minimum requirements. The Drawings and Specifications are based upon metal lockers, as manufactured by Tiffin Metal Products 1-800-537-0983. Products by any other manufacturers will be considered provided they comply with technical requirements and match the specified product in layout, configuration, construction, appearance and finish, in accordance with the design concept and intent and must be approved by the Department and/or Architect.
Manufacturer; Subject to compliance with requirements provide products by the following.
TIFFIN METAL PRODUCTS
Pistol Locker as manufactured by Tiffin Metal Products, a 4-compartment modular locker unit provides transitory, secure storage for Pistols or other small items such as knives, watches or wallets. These units can be mounted on a counter top or wall mounted with provisions for attaching two or more units together.
Each unit is furnished with numbered doors and uniquely coded keys with manufacturers limited three year warranty,
1.1 NUMBER AND SIZE
Sidearm Lockers as manufactured by Tiffin Metal Products, consisting of single units. Choose from four module sizes, with manufacturers limited three-year warranty. Each unit is furnished with numbered doors and uniquely coded keys.
Each door is nominal 13”W x 6”H.
Model/Module size:
Specify:0191 Four Door Module29 ¼”w x 8”d x 15 ½”h
0192 Six Door Module29 ¼”w x 8”d x 22 ¾”h 0193 Eight Door Module 29 ¼”w x 8”d x 30”h
0194 Ten Door Module29 ¼”w x 8”d x 37 ½”h
2.0 PRODUCT DESCRIPTION
2.1– LOCKS – Security type, replaceable lock cylinder with proprietary keying system and 12-gauge locking cam. Each lock cylinder to be keyed differently. All lock cylinders master keyed alike. Master key included.
2.2 MATERIALS - 7-gauge (.188 nominal) HRPO steel sheet CQ grade: free of buckling, scale and surface imperfections (conforms to ASTM A-591. Wrapper to be 14-gauge thickness. Recessed mounting brackets to be 10-gauge thickness.
2.3 FINISH – Baked on powder coat paint 5 mil min (warm beige texture standard color).
2.4 LOCKER FABRICATION
A. FRAMES - Formed and welded into integrated units.
B.BODY - Flanged, angled, and holed to high industrial standard. Lockers to be assembled by welded, bolted or riveted construction using corrosion resistant nuts and bolts.
C. DOORS- Louverless, to open at least 130 degrees,Hinges to be cold rolled 16 gauge continuous type. Door is flush when closed and locked with minimal edge clearance providing a pry-resistant feature. Safety chain prevents door from dropping open. Each door is nominal 13”W x 6”H.
D. INTERIOR - Each compartment shall have the bottom lined.
3.0 ACCESSORIES
Number Plates: Manufacturer’s standard etched, embossed, or stamped, plastic number plates with numerals at least ¼”H. Number lockers in sequence. Numbering system shall be a (3) number system. Attach plates to each locker door, near top, centered.
3.1 OPTIONAL
Tilt out doors. 10 Gauge doors and front.
4.0 Delivery - F.O.B. Tiffin, Ohio.
5.0 Installation - Installation and unloading of lockers by others.
WARRANTY - Manufacturers three year limited warranty against defects in material and workmanship.
APPROVED MANUFACTURER
Tiffin Metal Products
1-800-537-0983
I:SPECS/Sentinel Sidearm Locker Mutli-tier 012506
02/11/04MW
012506BC
1