Process Engineering Maintenance (Instrument and Control)
Level 3
Awarded by Scottish Qualifications Authority/Cogent
Accredited from 22 March 2005to31 March 2010
Group award number: G7RL 23
Standards
This SVQ is based on standards developed by Cogent SSCL. Cogent SSCL draws its membership from the engineering industry.
For further information, please contact SQA web site.
Structure of the SVQ
The way the SVQ is made up is shown below. The unit title appears in bold and the elements that make up each unit are listed under the unit title.
Mandatory units
Candidates must complete all of these units:
DM8V 04
Hand Over Process Engineering Plant and Equipment
1Hand over plant and equipment
2Accept and confirm responsibility for the control of plant and equipment
DM9J 04
Reinstate the Work Area after Completing the Maintenance of Process Engineering Plant and Equipment
1Reinstate the work area after completing the maintenance of process engineering plant and equipment
DM9T 04
Minimize Risks to Life, Property and the Environment
1Minimize risks to life, property and the environment
DN14 04
Work Safely, Minimize Risk and Comply with Emergency Procedures
1Work safely, minimize risk and comply with emergency procedures
DM9K 04
Contribute to Effective Working Relationships
1Contribute to effective working relationships
DM9C 04
Carry Out Planned Maintenance Procedures on Instrument and Control Systems
1Carry out planned maintenance procedures on instrument and control systems
DN03 03
Deal with Variations and Defects in Instrument and Control Systems
1Deal with variations and defects in instrument and control systems
DN0J 04
Diagnose and Determine the Causes of Faults in Instrument and Control Systems
1Diagnose and determine the causes of faults in instrument and control systems
Optional units
Candidates must also complete 2 units from Group A and 2 units from Group B, in addition to the mandatory units:
Group A
DN1A 04
Prepare Work Areas for the Maintenance of Process Engineering Plant and Equipment
1Prepare work areas for the maintenance of process engineering plant and equipment
DN0W 04
Prepare Equipment Required for Maintaining Instrument and Control Systems
1Prepare equipment required for maintaining instrument and control systems
DN16 04
Prepare Materials Required for Maintaining Instrument and Control Systems
1Prepare materials required for maintaining instrument and control systems
DM8R 04
Adjust Instrument and Control Systems to Meet Operational Requirements
1Adjust instrument and control systems to meet operations requirements
DN00 04
Remove Components from Instrument and Control Systems
1Remove components from instrument and control systems
DN0F 04
Replace Components in Instrument and Control Systems
1Replace components in instrument and control systems
DN0A 04
Determine the Feasibility of Repair of Components from Instrument and Control Systems
1Determine the feasibility of repair of components from instrument and control systems
Group B
DM9L 04
Interpret Detailed Instrument and Control Information from Technical Sources
1Interpret detailed instrument and control information from technical sources
DN1E 04
Read and Extract Information from Instrument and Control Engineering Drawings and Specifications
1Read and extract information from instrument and control engineering drawings and specifications
DM93 04
Identify and Suggest Improvements to Working Practices and Procedures whilst Maintaining Instrument and Control Systems
1Identify and suggest improvements to working practices and procedures whilst maintaining instrument and control systems
DN0N 04
Establish that an Electrical Engineering Process has been Completed to Specification
1Establish that an electrical engineering process has been completed to specification
DN11 04
Test the Performance and Condition of Instrument and Control Systems
1Test the performance and condition of instrument and control systems
DN09 04
Monitor the Performance and Condition of Instrument and Control Systems
1Monitor the performance and condition of instrument and control systems
DM94 04
Assess the Performance and Condition of Instrument and Control Systems
1Assess the performance and condition of instrument and control systems
DM9A 04
Inspect Instrument and Control Systems
1Inspect instrument and control systems
Contexts
The award can be taken in 2 different contexts. The contexts and group award numbers are listed below:
G7RR 23 Process Engineering Maintenance (Electrical) (level 3)
G7RN 23 Process Engineering Maintenance (Mechanical) (level 3)
There may be publications available to support this SVQ. For more information, please contact:
Customer Contact Centre
The Scottish Qualifications Authority
The OptimaBuilding
58 Robertson Street
GLASGOW
G2 8DQ
Tel: 0845-279-1000
Fax: 0845 213 5000
Email:
Website:
PEM (Instrument and Control)/level 3/28/2/05