APPLICATION FOR EXHIBIT SPACE / The following information will be used for the Show Directory. Please fill out this
form in English in print and send fax or email to
Shanghai Ying Zhan Exhibition Service Co., Ltd.
E-mail: Tel:021-54900077
QQ:800055702 Fax:021-54904537

EXHIBITING COMPANY INFORMATION

Name (English) / Chinese if applicable
Streets Address (No P.O.Boxes) / City/State
Country / Postal Code / Headquarter situated in
Telephone / ( ) / Fax / ( ) / E-Mail / Website
My company belong to: □Manufacturer □Distributor □Agent □Service □Other (Please advice)
MemberShip Number: / □CPCA / WECC □EIPC □HKPCA □IPC □IPCA □JPCA □KPCA □TPCA

CONTACT

Person in Charge / □Mr .□Ms / Title / Telephone / Mobile / E-Mail/QQ
Contact / □Mr. □Ms / Title / Telephone / Mobile / E-Mail/QQ
Street Address（No.P.O.Boxes） / City/State / Country / Postal Code

Please attach any additional contact information if necessary

EXHIBIT PROFILE

□PCB Manufacturing □PCB Equipment □PCB Raw Materials and Chemicals □Electronic Manufacturing Services / Contract Manufacturer
□Electronics Assembly Equipment □Electronics Assembly Materials □Intelligent manufacturing technology and equipment
□Environmental technology and equipment □Water treatment technology and equipment □Clean room technology and equipment □Other

BOOTH PREFERENCE & COST

(Booth is sold from at least 9 square meters. Two standard booth sizes are available, and 3 m × 4 m;Raw space shall not sold be less than 36 square meters)

Option / CPCA Member / WECC Member / Non-member / Space / Payment（RMB）
Standard Booth (3m×3m) / RMB 13077/ 9sqm / RMB 14490/ 9sqm / RMB 17325/ 9sqm / unit sqm
Standard Booth (3m×4m) / RMB 17436/ 12sqm / RMB 19320/ 12sqm / RMB 23100/ 12sqm / ………. unit sqm
Raw Space (minimum of 36 sqm) / RMB 12258/ 9sqm / RMB 13608/ 9sqm / RMB 16245/ 9sqm / Size: m× m sqm
Standard Booth (extra charge for corner booth) / RMB 980 / booth / booth
Additional charge for double-deck booth(s) / Booth Rental×30%
Co-exhibitors (Please apply and get the consent
from the organizer in in advance.) / RMB 1500/ exhibitor / exhibitors
* Standard booth Includes:Hard walls (sides&back),info counter,two spotlights,two folding chairs,waste basket,carpet,power,name fascia.
* Raw space is the Rental of floor space only and dose not include any utilities,service,walls or furnishings.Exhibitors with raw space are required to provide back and side walls. The maximum height for raw space is 4.4m and 6m for a double-deck.

PAYMENT

□ RMB □ USD Country of your remittance

The above-mentioned price or payment refers to the net amount to be transferred into the account of the organizer. All banking or other charges, if any, are to be borne by the exhibitor.

SIGNATURE AND SEAL Please keep a copy for your records

We hereby apply to participate in the 2018 China International PCB & Assembly Show. We agree to abide by the “Terms of Application and Exhibition Rules & Regulations” set by the Organizer. We understand that the Organizer is entitled to make use of the information provided above, or on-pass to the third party, for the purpose of to promote the exhibition. We accept that the Organizer assumes no responsibility for any error or editing.

We hereby certify that the information given above is all true and correct. If any of the information is found to be incorrect or misleading, the Organizer reserves the right to terminate our participation in the show and we will not make any claim against the Organizer for refund of any payment.

□ If you do not wish to have your information on-passed to the third party for promotion of the exhibition, excluding the production of the official show printing, please check against the box.

Signature and Seal / Date
This person must be authorized to sign on behalf of the exhibiting company.

Exhibit (Please check the category on next page. )

Exhibit (s) / Producing Area / Brand / Category / Dimension, Weight & Special Requirement

Please check the service if you need. More details will be provided.

□ Seminar for Exhibitors
□ News Release
□ Business Arrangement
□ Touring / □ Hotel Reservation
□ Booth Designing & Constructing
□ Man Power
□ Presswork / □ Sponsorship & Marketing
□ Customer-made Souvenir
□ Other (please advice)
………………………………………….

Visitor Invitation (Maximum 500 pieces)

Complimentary Advance Attendee Registration Brochures to be distributed you customers / visitors as part of pre-show promotion.Please indicate quantity needed. □ Pieces

Exhibitor Manual

You will be informed of the on-line access of the Exhibitor Manual. Should you need a CD-Rom sent to you, please don’t hesitate

to contact us.

Terms of Application and Exhibition Rules & Regulations

Hereinafter referred to as the Exhibitor, and Shanghai Ying Zhan Exhibition Service Co., Ltd., hereinafter referred to as the Organizer. The Exhibitor agrees to comply with the terms contained as follows as the formal contract for CPCA SHOW 2017.

The Exhibitor agrees to abide by the Terms of Application and Exhibition Rules & Regulations set out by the Organizer. The Application Form, Guide to Participation and Exhibitor Manual are regarded as part of this Contract.

1.The Exhibitor ensures that the exhibit(s) or service be directly pertinent to the function or industry represented by the exhibition described above and will obtain the Organizer’s consent.

2.Once the booth(s) is/(are) confirmed, the Contract and Invoice will be sent to the Exhibitor via fax or email. 100% of the fee must be sent by T/T within 5 working days. Becomes effective upon acceptance by the Organizer. Acknowledgment of acceptance will be sent by email or fax. Applications without accompanying payment are invalid and void. Booth(s) is/(are) only reserved with acknowledgment of an accepted contract by the Organizer.

3.The Exhibitor agrees to the following cancellation provisions:

Cancellation before February 5, 2018, 50% of the Payment for the Booth(s).

Cancellation after February 5, 2018, 100% of the Payment for the Booth(s).

4.The Exhibitor agrees to abide by intellectual property laws, including but not limited to trademarks and copyright infringement. Piracy and unlawful copying are prohibited.

5.The Exhibitor is prohibited to transfer, sublease or exchange the allotted booth(s) to other parties.

6.The Organizer reserves the right to relocate the Exhibitor to a location other than the above-mentioned booth/space after confirmation. The Exhibitor will receive a booth/space equal in area to the contractual agreement. The Exhibitor accepts this as a necessary contractual provision.

Company name / Date

A.  PCB Manufacturing

□ A1 Single Sided Board
□ A2 Double Sided Board
□ A3 Multi Layer Board
□ A4 Flexible Board
□ A5 Package Substrate
□ A6 Other (Please advice)

B.  PCB Equipments

□ B1 Pre-Production Preparation
□ B2 Issue Laminate Process
□ B3 Inner Layer Process
□ B4 Laminating Process
□ B5 Drilling/Punching Machine
□ B6 Pattern Process
□ B7 Panel Copper Plating Process
□ B8 DES Line
□ B9 Pattern Plating Process / □ B10 Outer Layer Fabrication
□ B11 Direct Moralization Plating Process
□ B12 Resisting Process
□ B13 Screen Printing Process
□ B14 Reflow Process
□ B15 Hot Air Leveling Process
□ B16 Surface Treatment Process
□ B17 Routing Process
□ B18 Testing Equipment
□ B19 Packing Process
□ B20 Automatic Equipment
□ B21 Environmental Engineering Equipment
□ B22 Other (Please advice)

C.  PCB Raw Materials and Chemicals

□ C1 Resin
□ C2 Copper Foil
□ C3 Glass Fiber / □ C4 Base Materials
□ C5 Inner Layer
□ C6 Lamination Process
□ C7 Drilling
□ C8 Image Transfer
□ C9 PTH Chemicals
□ C10 Direct Moralization
□ C11 Electroplating Chemical
□ C12 Tin/Lead Plating Chemical
□ C13 Out Layer Fabrication
□ C14 Ink
□ C15 Emulsion
□ C16 Solder Mask
□ C17 Screen Printing
□ C18 Gold Finger
□ C19 Surface Treatment
□ C20 Other (Please advice)

D.  Electronic Manufacturing Services / Contract Manufacturer

□ D1 Consignment EMS
□ D2 Medium Volume EMS
□ D3 Turn-key EMS
□ D4 High Volume EMS
□ D5 New Product Introduction EMS

□ D6 Prototype EMS

E.  Electronics Assembly Equipment

□ E1 AOI Equipment
□ E2 Chip Placement
□ E3 Component Insertion
□ E4 Feeding Systems – Bulk
□ E5 Fine Pitch Placement
□ E6 Flip Chip Technology
□ E7 Multifunctional Placement
□ E8 Odd Form Assembly
□ E9 Ball Placement Systems & Equipment
□ E10 Barcode Printers / Readers
□ E11 Board Handling Equipment
(Conveyors & Depanelizers)
□ E12 Brushes
□ E13 Carts, Racks, Accessories
□ E14 Cleaning Equipment / Systems
□ E15 Coating Equipment / Systems
□ E16 Component Preparation
□ E17 Curing Equipment / Systems
□ E18 Data Acquisition Software / Systems
□ E19 Dicing Equipment
□ E20 Die Bonding Equipment
□ E21 Dispensing Equipment
□ E22 Dryers / Drying Systems
□ E23 Encapsulation Equipment / □ E24 Environmental & Waste Treatment /
Management
□ E25 Equipment Lease, Refurbish, Resale
□ E26 Fans & Blowers
□ E27 Flip Chip Bonding Equipment
□ E28 Fume Extraction Systems
□ E29 Gas Atmosphere Systems
□ E30 Hand Tools
□ E31 Labeling Systems
□ E32 Laser Systems
□ E33 Lighting
□ E34 Marking Tools / Systems
□ E35 Masking, Demasking Systems
□ E36 Masks & Screens for Soldering / Printing
□ E37 Motion Control / Automation
□ E38 Pallets & Carriers
□ E39 Reclamation / Recovery Systems
(Environmental)
□ E40 Reflow Soldering Equipment (Ovens)
□ E41 Repair & Rework
□ E42 Software – CAD/CAM
□ E43 Software – Process Control
□ E44 Software – Test, Measurement, Inspection
□ E45 Solderability Test Systems
□ E46 Soldering Equipment, Other
□ E47 Soldering Equipment, Selective
□ E48 Soldering Irons, Tips, Stations
□ E49 Stencil Cleaning Systems
□ E50 Stencil Printing Systems
□ E51 Stencils & Accessories
□ E52 Tape & Reel, Equipment & Services
□ E53 Test & Inspection, Solder Paste
□ E54 Test & Measurement Equipment, Functional
□ E55 Test & Measurement Equipment, In-circuit / □ E56 Test & Measurement Equipment, Infrared
□ E57 Test & Measurement Equipment,
Package
□ E58 Test & Measurement Equipment,
Vision / Videos
□ E59 Test & Measurement Equipment, X-ray
□ E60 Test Fixtures
□ E61 Test, Environmental Chambers
□ E62 Test, Inspection & Measurement,
Test Handlers
□ E63 Test, Inspection & Measurement,
Miscellaneous
□ E64 Thermal Profiling
□ E65 Wafer Bumping Equipment
□ E66 Wave Soldering Equipment
□ E67 Wire Bonding Equipment
□ E68 Wire Cutting, Stripping,
Wrapping Machine Tools
□ E69 Work Benches / Work Stations
□ E70 Workstations / Ergonomics / Chairs

F.  Electronics Assembly Materials

□ F1 Adhesives
□ F2 Cleaning Agents / Solvents
□ F3 Coatings (Conformal), etc.
□ F4 Component Packaging Products
□ F5 Components
□ F6 Connectors, Fasteners, Hardware
□ F7 Distributor
□ F8 EOS / ESD Handling Products
& Services
□ F9 Flux
□ F10 Gases – Specialty
□ F11 Chip Packaging Materials
□ F12 Solder (Paste, Bar, Cream, Powder)
G. Water treatment technology and equipment
□ G01 Sewage and industrial
wastewater treatment
□ G02 Membrane separation technology
and equipment / □ G03 Drinking water , water purification
technology and equipment
□ G04 Water supply, drainage and piping
□ G05 Fluid equipment , pumps, valves / □ G06 Instruments and Automation Systems
□ G07 Water Treatment Chemicals
□ G08 Related Services
H. Clean room technology and equipment
□ H01 Air purification equipment and products
□ H02 Clean Rooms
□ H03 Static Control / □ H04 Clean room equipment and products
□ H05 Cleanroom Specialty Materials & Products
□ H06 Clean room for supplies , ancillary
products and decontamination
□ H07 Refrigeration , air conditioning
and ventilation facilities / □ H08 Air testing equipment
□ H09 Air pollution control technologies
and products
□ H10 Indoor environmental health-related
products
R. Other
□ R1 News Media / □ R2 Research Institutes
□ R3 Information & Consulting / □ R4 Business or Trade Associations
□ R5 Other (Please advice)
Company name / Date

2/3