Company Name: / Contact Person:
Address:
Report Copy via email to: DM Testing Team
Telephone: / E-mail Report:
E-mail: / Failed Hard Copy report send to: Vendor/Factory i.e.: Contact Person responsible who ordered testing
Sample Description: / No. of Samples:
DMStyle #: / DM Color #:
Vendor /Factory Name: / Fiber Content:
DM PO #: / Country of Origin:
DM Testing Associate: / Lindsay / Fabric Country of Origin:
Fabric end use:
Dye Type:
ADVISE: Trim, Embellishment, Screen Print, Heat Seal, Separate belt or accessory:
SERVICE REQUESTED [Check One]
STANDARD: 4 BUSINESS DAYS:
RUSH SERVICE:3 BUSINESS DAYS {40-50% surcharge}:
SAME DAY SERVICE: 1-2 BUSINESS DAYS{100% surcharge} *Requires Pre-Approval by Lab:

*NOTE: All Service turnaround times advised above are dependent on the Tests requested.

CHOOSE DM CODED CARE assigned by DM Testing Team: [Check One]
DMCARE-TRI-01 / DMCARE-TRI-02 / DMCARE-TRI-03 / DMCARE-TRI-04
Wash before wearing Hand wash cold separately Mild detergent Only non-chlorine bleach when needed Lay flat to dry Low iron if needed or Dry Clean
/ Wash before wearing Machine wash cold
With like colors
Gentle cycle
Mild detergent Only non-chlorine bleach when needed Tumble dry low
Low iron if needed or Dry Clean
/ Wash before wearing Machine wash cold With like colors Gentle cycle Mild detergent Only non-chlorine bleach when needed Lay flat to dry Low iron if needed or Dry Clean
/ Dry Clean Only

DM MODIFIED CARE
*If Testing Team has issued a modified coded care please fill in Care Instructions and symbols below /
CARE INSTRUCTIONS
FRENCH & SPANISH TRANSLATIONS / CARE SYMBOLS
TESTING PACKAGE REQUESTED [Check One]
Test Package Name / General Sampling Requirements / Check Box
KNIT TEST PROTOCOL / FABRIC TEST
{4 yards fabric -darkest color on order}
*Sweaters NO Fabric Allowed – submit Garments
ADD COLOR TEST
{1-2 yards fabric - each add color on order}
*Sweaters NO Fabric Allowed – submit Garments
GARMENT TEST
{4 Pre-Production Garments - darkest color on order}
*Sweaters NO Fabric Allowed – submit Garments
WOVEN TEST PROTOCOL / FABRIC TEST
{4 yards fabric -darkest color on order}
*Denim/Specialty Dye NO Fabric Allowed – submit Garments
ADD COLOR TEST
{1-2 yards fabric - each add color on order}
*Denim/Specialty Dye NO Fabric Allowed – submit Garments
GARMENT TEST
{4 Pre-Production Garments - darkest color on order}
*Denim/Specialty Dye NO Fabric Allowed – submit Garments
SWIMWEART TEST PROTOCOL / FABRIC TEST
{4 yards fabric -darkest color on order}
ADD COLOR TEST
{1-2 yards fabric - each add color on order}
GARMENT TEST
{4 Pre-Production Garments - darkest color on order}
BRA TEST PROTOCOL / FABRIC TEST
{4 yards fabric -darkest color on order}
ADD COLOR TEST
{1-2 yards fabric - each add color on order}
GARMENT TEST
{4 Pre-Production Garments - darkest color on order}
ZIPPERS TEST PROTOCOL
{Test only generic-not purchased from DM Preferred supplier} / SAMPLE TEST
{65 Zippers}
RE-TEST
{Previous Testing Failure} / List Previous Test Report & Test(s) Required
PRELIMINARY OR INDIVIDUAL TESTING {DM directed} / List Test(s) Required:
OTHER: / List Test(s) Required:
NOTE:
  1. Styles that have combo fabrics that exceed 15% of the total body of the style OR have a Mid or Under Belly (cotton spandex), Knit Bra Lining, or Lining Fabric require 4 yards of the combo fabric(s) provided at the same time self-fabric is submitted for Fabric Testing.
  2. Bras: Bra Fabrics used for functionality (Nursing Lining, Shell or Combo Shell) require full fabric testing. Decorative fabrics such as lace trimming do not.
  3. Styles with a Secret Fit Belly – the SFB Tubes are NOT required to be tested separately during Fabric Testing Stage of the style being tested.
  4. Styles using suspect fabric that require Flammability Testing 1 additional yard of fabric OR 1 additionalsample is required for flammability testing.
  5. Styles with a Heat Seal must have Appearance Testing in Fabric and Garment form. At Fabric Testing stage, a fabric panel with production quality Heat Seal applied, must be provided in addition to the 4 yards of fabric so that appearance after wash can be checked early in the testing cycle. At Garment Stage, the production quality Heat Seal must be exhibited in all garments submitted for testing. If there are different color heat seal per colorway Vendors are required to ensure the fabric panels are tested for appearance per colorway with correct color heat seal applied to ensure appearance to laundering & DC is acceptable for all color combinations.
  6. Styles with a Screen Print must have Appearance & CF Testing in Fabric and Garment form. At Fabric Testing stage, a fabric panel with production screen print quality applied, must be provided in addition to the 4 yards of fabric so that appearance after wash & DC can be evaluated early enough in the testing cycle if a problem occurs. At Garment Stage, the production quality screen print must be exhibited on all garments submitted for testing. If a screen print style has multiple colors with different screen prints per colorway – each color requires Appearance to wash & DC. If Vendor has a program of styles with different screen prints per style but all using the same Inks – Vendors must consolidate the screen print Appearance testing and choose the best selection of styles that represents all color inks used and only test those styles to represent ALL INK COLORS.
  7. Styles with Belts (Metal, Faux Leather, Genuine Leather or material other than fabric) must have belt attached to garments so that they can be evaluated for California Prop 65 or other mandatory state regulatory testing.
  8. Garment Dye, Dip Dye, Tie Dye, Over-dye, Pigment Dye & Denim styles must be tested in Garment Form – no exceptions.
  9. Sweaters – Must be tested in Garment Form – no exceptions
  10. Additional sampling requirements (Yardage, Garments or Trim) may be needed dependent on styling and construction – always check with INTERTEK Lab prior to testing.
  11. In Addition to the above: All Destination Maternity Corp. product tested will be automatically evaluated for any applicable California Prop 65, CPSIA, State Regulatory Testing and this testing, if applicable, will be automatically performed and testing cost billed outside the DM package price. * A GCC will be issued at the end of each test report when applicable to the rules/ban/requirement appropriate for the product tested.

REMARK: Manufacture Information is required for CPSIA’s, State Regulation or Flammability General Conformity Certificate

Name of Manufacturer:
Mailing Address / Tel No.:
Date of Manufacture (MM/DD/YY):
Place of Manufacture (City/Province/Country):

All testing carried out under the Destination Maternity Corp. Global Testing Program will be subject to DM scale of approved testing fees and VAT tax as set forth in the current Global Testing Program price list. A Pro-forma invoice of testing chargesis available to all DM Vendors/Factories ordering testing on behalf of DM. DM test reports are confidential and are issued by INTERTEK Lab in locked PDF format to prevent tampering. Copies of Destination Maternity test reports are automatically provided to the DM Vendor/Factory who ordered testing and DM Testing Team. DM test reports may not be shared with any other party without the express written permission of DM. Failure to comply with these requirements will result in de-certification of Lab, Vendor or Factory involved.

DATE
AUTHORIZED SIGNATURE:
TITLE OF AUTHORIZED SIGNER:

1 | Page