MODELS: FBR-1FE1FXA-M-MINI
FBR-1FE1FXB-M-MINI
FBR-1FE1FXA-S-MINI
FBR-1FE1FXB-S-MINI
TECHNICAL SPECIFICATIONS
DIVISION – LEVEL 1___ 28 ELECTRONIC SAFETY AND SECURITY
LEVEL 2___28 20 00 ELECTRONIC SURVEILLANCE
LEVEL 3___28 23 00 VIDEO SURVEILLANCE
LEVEL 3___28 23 19 DIGITAL VIDEO RECORDERS AND ANALOG RECORDING DEVICES
1 GENERAL
A. Equipment materials and components shall be available for purchase from the product manufacturer as standard replacement parts while the product is commercially available from the manufacturer.
B. Product shall be thoroughly tested and operationally proven by the manufacturer prior to sale or installation.
C. Online or phone support services shall be supplied by the manufacturer to provide information or assistance in product use, installation, and configuration.
D. Products proven defective in materials or workmanship during the stated period of warranty shall be repaired or replaced by the manufacturer without additional charge.
2 PRODUCTS
A. The Ethernet Media Converter shall provide a 10/100 Mbps Ethernet port, a 10/100 BASE-T/TX electrical port, and a 100 BASE-FX optical port. The electrical port shall support Auto-Negotiation for 10 Mbps or 100 Mbps, and full duplex or half duplex data. The optical port shall support 100 Mbps full duplex data.
B. The Ethernet Media Converter shall operate over distances up to 2 miles in Multi-mode, and 28 miles in Single-mode.
C. The Ethernet Media Converter shall be compliant with 1EEE 802, UL/EN60950-1, FCC part 15, EN55022, EN55024, and FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J.
D. The Ethernet Media Converter shall support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data.
E. The Ethernet Media Converter shall provide an optical port that supports 100 Mbps full duplex data.
F. The Ethernet Media Converter shall support Automatic MDI/MDI-X crossover.
G. The Ethernet Media Converter shall not require in-field optical adjustments.
H. The Ethernet Media Converter shall meet or exceed the following design and performance specifications:
FBR-1FE1FX-MINI Series Specifications
1. DATA
a. Data Interface Ethernet
b. Data Rate 10/100 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Port
Full Duplex Optical Port
c. Ethernet Connector RJ-45
2. FIBER
a. Number of Fibers Required 1 per Transceiver (2 fibers max.)
SINGLE MODE MULTIMODE
b. Type of Fiber Single-mode Multi-mode
c. Type of Optical Connector FC ST
d. Wavelengths Used (Fwd./Rvrs.) A:1310/1550 nm A:1310(Tx)/1550(Rx) nm
B:1550(Tx)/1310(Rx) nm B:1550(Tx)/1310(Rx) nm
e. Optical Power Budget 15 dB 10 dB
f. Maximum Distance (miles/km) 28 miles / 45 km 2 miles / 3 km
3. ELECTRICAL
a. Power 12 VDC @ 200 mA
b. Current Protection Automatic Resettable Solid-State Current Limiters
c. Power Connector Terminal Block with Screw Clamps
4. INDICATORS
a. Indicators Optical Link/Data Activity
Electrical Link/Data Activity
Electrical Speed
Power
5. MECHANICAL
a. Overall Size 3.5” x 2.5” x 1.1” (89 x 64 x 28 mm)
b. Number of Rack Slots
c. Unit Weight <2 lb/0.9 kg
d. Shipping Weight <2 lb/0.9 kg
6. ENVIRONMENTAL
a. Operating Temperature -40oC to +75oC
b. Storage Temperature -40oC to +85oC
c. Relative Humidity 0% to 95% non-condensing
d. MTBF (hours) > 100,000 hours
7. COMPLIANCE
a. Safety Standards Unit Complies With UL/EN60950-1
b. EMC Standards Unit Complies With FCC part 15, EN55022, EN55024,
EN50130-4
c. Laser Standards Unit Complies With FDA Performance Standard for Laser
Products, Title 21, Code of Federal
Regulations, Subchapter J
FBR-1FE1FX-MINI Series Model Numbers
1. FBR-1FE1FXA-M-MINI 10/100 Mbps Ethernet 2-Port Mini Media Converter, MM, Transceiver A
2. FBR-1FE1FXB-M-MINI 10/100 Mbps Ethernet 2-Port Mini Media Converter, MM, Transceiver B
3. FBR-1FE1FXA-S-MINI 10/100 Mbps Ethernet 2-Port Mini Media Converter, SM, Transceiver A
4. FBR-1FE1FXB-S-MINI 10/100 Mbps Ethernet 2-Port Mini Media Converter, SM, Transceiver B
AventuraCCTV.com Tel: 1-631-300-4000 Fax: 1-631-434-7000