Mike Fritz / Brett Odgers - Contech / Keith Ferrell / Llans Taylor
(Rationale: To update the specification to comply with performance specification requirements. The PE drainage tubing was deleted based on a national study of edge drainpipe, including some in Missouri, which questions the effectiveness of the product. Revisions include format changes to comply with new policy.)
08/14/03 - On Sec 1013, our teams rebuttal to comments regarding the exclusion of tubing was too harsh and should have been backed up by findings from the FHWA document FHWA SA-98 - 044 Video Inspection of Highway Edgedrain System. Don Hillis voted to approve this section.
SECTION 1013
MISCELLANEOUS DRAINAGE MATERIAL
1013.1 Scope. This specification covers material requirements for various plastic pipes , tubing and other miscellaneous items required to provide underdrainage and edge drainage as specified elsewhere.
1013.2 Acceptance. Acceptance of the material will be based on visual examination and results of such tests as might be performed required by the engineer.
1013.2.13 Material. Pipe materials shall be PVC or HDPE.
1013.3.1 Plastic Pipe.
1013.3.1.1 The pipe material shall contain have a minimum pipe stiffness of 46 psi (xx kPa).
1013..22.1 Plastic Pipe.
1013.23.1.21.12 Corrugated PVC sewer pipe with a smooth interior and fittings shall conform tobe in accordance with ASTM F 949.
1013.2.21.23.1.3 Smooth wall PVC underdrain pipe and fittings shall conform to be in accordance withAASHTO M 278 ASTM D 3034.
1013.2.1.3 Corrugated PE drainage tubing and fittings shall conform to AASHTO M 252.
1013.2.2.33.1.41.4 Corrugated PE pipe with a smooth interior and fittings shall conform tobe in accordance with AASHTO M 252 Type S or SP.ASTM F 892, except any perforations shall be provided in accordance with AASHTO M 252.
1013.2.2.43.1.51.5 Schedule 40 PVC pipe shall conform tobe in accordance with ASTM D 1785.
1013.3.2 Rodent Screens. Rodent screens shall be press formed of 3 or 4 mesh, 21 gage (0.7 mm) or heavier, stainless steel or hot-dipped galvanized wire screen or engineered approved equaluivalent so as to provide a cup-shaped screen which will provide a friction tight fit when inserted into the drain outlet.
1013.441.6 Certification and Acceptance. Documentation. The contractor shall furnish a manufacturer's certification to the engineer, for each lot of plastic pipe material furnished, stating the name of the manufacturer and certifying that the material supplied conform tois in accordance with all requirements specifiedthis specification. Acceptance of the material will be based on the manufacturer's certification and upon the results of such tests as may be performed by the engineer.
1013.2.2 Rodent Screens. Rodent screen shall be press formed of 3 or 4 mesh, 21 gauge
(0.7 mm) or heavier, stainless steel or hot-dipped galvanized wire screen so as to provide a cup-shaped screen which will provide a friction tight fit when inserted into the drain outlet.
1013.2.2.1 Acceptance. Acceptance of the material will be based on visual examination and results of such tests as might be performed by the engineer.