LAB: PARTS PER MILLION

Background:

In this activity, the concept of parts per million, a unit of measurement, will be investigated. People are often concerned with materials in very small amounts of concentrations. Sometimes when discussing water or air, a scientist will have to discuss what is in the fluid in terms of parts per million (ppm) or parts per billion (ppb) because the amounts are so small. A concentration of 1 ppm corresponds to one part pollutant per one million parts of the gas, liquid, or solid medium it is found in. But just because these amounts are so small does not mean that they are unimportant. For example, fish like bass require a dissolved oxygen level of at least 4 ppm. The ambient air quality standard for pollutant sulfur dioxide (SO2) is 30 ppb.

Living things can be affected by very small amounts of materials in water. It is important to know the human tolerance level of a substance. As technology develops, people are able to use more sensitive equipment and testing techniques to detect tiny concentration of contaminants in water. The smallest amount which can be detected is the detection limit. The smaller the detection limit, the more we know about what is in our water, and more can be done to keep our water safe. Today scientists are able to detect some materials as parts per billion or even parts per trillion concentrations.

MATERIALS:

7 small clear containers, dark color unsweetened drink mix, plastic spoon, flashlight or laser, light and dark paper for background, 100 ml graduated cylinder, marking pencil

PROCEDURE:

  1. Accurately measure and add 100 ml of water, then add contents of one drink mix packet (3.9 g) into a clear plastic container. This concentration will be called 1/1, or one part per one.
  1. Measure 90 ml of water into each of the other six containers.
  1. Label the containers #1-7, with #1 as the container into which drink mix was added.
  1. Carefully measure 10 ml of the container #1 and stir it into container #2. This concentration is 1/10, one part per ten.
  1. Continue serial dilutions using the remaining containers. Prepare drink mix solutions containing 1/100, 1/1,000, 1/10,000, 1/100,000 and 1/1,000,000.
  1. Check each container for the Tyndall effect. The Tyndall effect allows you to detect the presence of a material when suspended in a fluid. Check for the Tyndall effect by shining the flashlight or the laser into the liquid from the side as demonstrated by your teacher. If you can see the light beam pass through the fluid, then you know something else is there. See figure 1.

DATA TABLE:

FIGURE 1. Tyndall effect.

The particles of a suspension will cause a beam of light to scatter as it passes through the suspension due to the reflection of the light off of the large particles. Since the particles are randomly arranged within the suspension, the reflection of the light is randomized, which causes the light to scatter. The scattering of light is clearly visible to an observer. Since the particles in a solution (e.g., salt water) are much smaller, there is no discernible reflection of light. Therefore, it is not possible to see a light beam as it passes through a solution.

Whenever a driver encounters a foggy area on the highway at night, the Tyndall Effect is the most evident. It is not possible to see distant beams of light coming out of the car’s headlights as it goes down the road. The atmosphere is a solution of gases. But when the car drives into a fog bank, the light beams are easily seen. Fog is a suspension of water molecules in the air. In fact, the driver must be sure that the car’s lights are on “low beam” because there is so much scattering of light. If high beams are on, the reflection against the suspended water droplets can impair the vision of oncoming drivers.

QUESTIONS FOR FURTHER ANALYSIS:

  1. At what concentration did you notice that the color of the dark mix was no longer visible?
  1. How do you think a solution of one part per million salt water would taste? Explain.
  1. If one cannot see a diluted chemical in drinking water, does that mean the water is safe to drink? Explain.
  1. How many parts per million of salt are found in a 3.5% salt solution?
  1. Express the ambient air standard for ozone and nitrogen oxides in % and ppm.
  1. If you were the toxic waste manager of a factory, you might be responsible for diluting dangerous chemicals to safe levels in order to dispose of them legally. If a one liter sample of a chemical waste had a concentration of 5,000 ppm, how much water would have to be added to dilute the sample to an acceptable concentration of 5 ppm? Show work.
  1. Write another problem similar to the previous question, but include a “ppb” concentration. Show the solution to the problem as well. Include all calculation.