Sayfa: 1 / 4



TECHNICAL DATA SHEET (TDS)


IssueDate: 30.05.2014

IZOMAX GREENLANDBITUMINOUS WATERPROOFING MEMBRANE

RootResistantPolymerModifiedBitumenWaterproofingMembranes

Description

Withitsresistancetoplantroots, IzomaxGreen Land has beendesignedtocreategreenareasoverconcretestructures, whicharethetypical modern cityarchitecture, and it providespossibilitiestocreatemoregreenspaces. IzomaxGreen Land, which is a waterproofingmembranereinforcedwith PVC and polyester mat, is beingmanufactured as 3-4 mm (118-157 mil) thickness, and itsdimension is 1x10 meter (3.28’x32.81’) for a roll. IzomaxGreen Land can be usedforwaterproofing of terraces, roofs, and constructionfoundationswithexternalbundling, as well as, in specialapplicationslikewaterproofing of football and golf fields.

ApplicationAreas

IzomaxGreen Land is a productthat can be easilyappliedtostructuraldetails of gardens, terraces, and terraceroofs, and it eliminatesthe risk thatplantrootsdamagethroughtheisolationcoating. Thankstoitsuniqueformula, IzomaxGreen Land preventsplantrootstogrownearthecoating and avoidsanypossibledamagetowaterproofing.

Advantages

  • Resistsforthelifetime of thebuilding.
  • Applicabletovarioustypes of substrates
  • Thequantityto be used can be determinedbeforetheapplication.
  • Itscapability of resistanceagainstcoldtemperature is veryhigh.

Storage and Preserving

  • Rollsshould be stored and carriedindoors in a verticalposition.
  • Should not be exposedtoultravioletrays (UV) and tosuddenchanges of temperatures.
  • Rollsshould be coveredforprotectionfrom UV raysiftheyareto be storedfor a longperiod of time.
  • No cuttingorperforationshould be madeaftertheapplication.
  • Itshould not be exposedto UV raysaftertheapplicationwithout mineral stonecapsheetorprotectivecoating.
  • Rollsshould not be put one on top of anotherifstoredwithoutpalettes.
  • Maximumtworowsshould be put one top of anotherifstoredwithpalettes.

TechnicalSpecification

RootResistantPolymerModifiedBitumenWaterproofingMembraneswith Polyester Reinforcement

MembranePhysicalProperties / Unit / Tolerance / Standard / P-3000 / P-4000
Reinforcement / - / - / TS 11758-1 / Polyester / Polyester
Top SurfaceCoating / - / - / TS 11758-1 / PE Film / PE Film
BottomsurfaceCoating / - / - / TS 11758-1 / PE Film / PE Film
Thickness (min) / mm / ± 0,02 / TS EN 1849-1 / 3 / 4
Length / m / ± 0,03 / TS EN 1848-1 / 10 / 10
Width / cm / ± 0,02 / TS EN 1848-1 / 1 / 1
VisualDefects / - / - / TS EN 1850-1 / None
ThermalResistance / C / - / TS EN 1110 / > 120 / > 120
FlexuralStrength in Cold / C / max. / TS EN 1109 / -10 / -10
Tensile Strength (Length /Width) / N/5cm / - / TS EN 12311-1 / 800/600 / 800/600
Elongation at Break / % / - / TS EN 12311-1 / 35 / 35
TearStrength (Length / Width) / N / - / TS EN 12310/1 / 250 / 250
Reactionto Fire / - / - / TS EN 13501-1 / Class E
WaterTightness / - / - / TSprEN 1928
(Metod B 10 kPa) / Waterproof
WaterVaporPermeability / - / min. / TS EN 1931 / 20000
DimensionalStability (Length) / % / - / TS EN 1107-1 / > 0,6

ApplicationGuidelines

  1. PreparationGuidelines
  1. Thesubstratemust be smooth, clean, dry and free of allcontaminantssuch as dirt, oil, grease, coatings and surfacetreatments, etc.
  2. Ifthesubstrate is concrete, coldappliedprimershould be appliedtosurfacepriortoapplication.
  3. Inordertoensuresmoothrotation of themembrane,at allvertical and horizontalcomponents of intersectionsand wheretheverticalcomponentschangedirections, 45 degreesinclined, 8 cm x 8 cm widechamfershould be made.
  1. InstallationGuidelines
  1. 10 cm (4 inches) overtoppingshall be allowedforjoints and 15 cm (6 inches) overtoppingforendsbyusingweldingtorch. Thesurfacecoatedwith mineral stone on jointsshould be heated and mineralsshould be buried in tothebituminioussurfacebyusingtrowelbeforeweldingthejointstogether.
  1. Allbitumuniouslayersshould be opened in thesamedirection. Thetransversejoints of thefirstlayercoveringshould be laiddown in an offsetposition.Forthe top layer, longitudinal and transversejointsof thefirstlayershould be centered.
  1. Roofcoversshould be laidperpendiculartotheslopefromthepointwheretheslope is lowest.Iftheslope is higherthan 30%, technicalspecificationsrequiredbytheslopeshould be takingintoaccountbeforelayingdownthemembrane
    .
  1. BondingGuidelines
  1. Thedistancebetweenthebondingsurfacesshould be approximately 5 to10 cm. Whenbonding in strips, stripsshould be fullybondedwithtransverse and longitudinaldirection of thejoints of theothercovers.Unlessstatedotherwise in details, thisapplicationwould be applied in twolayers on concreteroofsurfaces (vaporbarrier) and on thermalinsulation (vaporstabilizer) layers.
  1. Inroof and foundationapplications, thesecondlayer of themembranesshould be boundedtothecenterthejoints of thefirstlayercoveringbyusingfullbondingmethod.

ApplicationConditions

Airtemperatureduringapplicationmust be between+5⁰C and +30⁰C. Ifthematerialsarestockedunder+5⁰C , theyshould be kept in over+5⁰C for 4 hoursbeforetheapplicationprocedurestarts.

Consumption

Theamount of materials can be determinedbeforetheapplication.

SafetyPrecautions

Duringoperation, workclothes, protectivegloves and masksshould be used. Uncuredmaterialmightcauseirritation. Therefore, eye, mouth, and skin contactshould be avoided, thecontactareashould be washedwithwater. Contactmedicalprofessionals in case of moredangeroussituationsoringestion. No foodshould be allowed in applicationareas. SeeSafety Data Sheetformoredetailedinformation.

ProductLiability

Izomaks is justresponsibleforthequality of theIzomaxGreen Landlabelledproducts. Allthe data referredhereinaregathered as a result of practical and scientificstudies. Izomakscannot be legallyobligatedorresponsibleforanydamageunlesscorrectproduct is usedaccurately in suitableareas and underrightconditions.

Legal Notes

Alltheinformation and referenceshereinregardingIzomaxGreen Landlabelledproductsareprovided in goodfaith in accordancewithIzomaks’sknowledge and experience. Applicationfields and surfaces of theproductsmayalter in differentsituations. Itmust be ensuredthatthecorrectproduct is usedaccurately in suitableareas and underrightconditions. Allthecommercialfactors, data and instructionsregardingapplicabilityprovidedbyIzomaksshould be abidedthroughimplementation. Izomakscannot be legallyobligatedorresponsibleforanydamagethatmayoccurduetofailureto abide bytheinstructionsprovidedbyIzomaks. Thethirdpartyapplicators/usersshouldrunallthenecessarytestsfortheaccurateusage of theproducts. Izomaksreservesalltherightsforalteration of theproducts. Theapplicators/usersshouldobserveintellectualpropertyrights of thethirdparties.

Whentheorder is confirmed, alltechnicalrequirementsareessential in respect of existingsales and transportation.

IZOMAKS INDUSTRIES INC. [İZOMAKS ENDÜSTRİ SAN. TİC. A.Ş.]

Akçaburgaz Mah. 153. Sok. No: 13/Z Esenyurt – İSTANBUL Tel: 0212 798 24 66 Faks : 0212 798 24 67

İZOMAX GREENLANDBituminouswaterproofingMembranes